A mount that failed on every try retried every 5 s forever, and the
reason was only in the journal: the app and the tray said Connecting...
for days (B263, issue #40). The retry now doubles to a 2-minute ceiling,
and the last failure is kept in mount-failure.json for the app, the
tray, pdfs diagnose and systemctl status.
The early returns in mount left the workers they had started running
beside the next attempt (B264). They are now stopped on every error
path, without telling systemd the daemon is stopping.
A new sync folder row starts with state idle, so the app called a folder
up to date before any of it reached Drive (B261, issue #53). A mirror
folder that has never synced now reads "waiting for first sync", and
the This computer row counts such folders. All catalogs translated.
A poll in the same burst as a new folder's Reconcile(id) took its place,
so the new folder waited behind a pass over every other one (B260).
A recursive watch that failed partway left its watches registered, was
never retried, and its events ran passes over every folder (B262). It
is now unwatched and retried every 10 minutes, symlinks are not followed,
and watcher errors are logged. A folder removed and added again in one
burst keeps its watch under the new id (B272).
One thread runs every synced folder's passes. A panic in a pass ended
it, and every later add, sync-now, file event and poll went nowhere
without a word until a restart, which fits issue #53 (B259).
Each pass now runs under catch_unwind; a panic sets the folder to error
and the next poll tries again. Diagnostics reports the engine's state,
the supervisor warns when it has ended or a pass has gone quiet, and
first passes log at info.
journald stored every daemon line at info, so journalctl -p warning,
which TROUBLESHOOTING.md asks reporters for, was always empty (B258).
When fd 1 is the journal stream, prefix lines with <N> and drop colours.
B258 to B273: why a stuck sync, a failing mount and a silent restore
are invisible, plus the sync, mount and restore bugs behind them.
B165, B202, B205 and B210 point at the entries that finish them.
The reaper found an abandoned root in the trash and sent the delete. The
reply did not confirm it, and the next listing no longer had the node,
but the retry loop only counted deletes it sent itself. It waited for a
node that was already gone, reported it as never trashed, and the
leftover check stopped the run before any case ran.
Callers that just found the node in the trash now say so, and the error
of the first delete is kept for the warning.
A switch asked for before any pass saw the folder empty found it still
idle, so the check for what only this computer has ran at once and
refused it for good: every synced path read as "deleted here but not on
Proton Drive yet". The account run hit it in the B255 case.
A local copy gone in full is the wipe guard's case, which the push pass
of a queued switch settles without trashing anything on Drive. The
switch now returns NotNow for it, so the request is queued and that pass
runs first. A partial deletion is still refused as before.
The worker thread's sleeps could begin before the test read the clock, so the elapsed time came out a few milliseconds under the 90 ms bound on a busy runner. Reading the clock first makes the bound hold.
Every case of a run shares one root, and the pdfs copy case before it
had already made "copies" there, so the B256 case failed on its mkdir
with EEXIST before it checked anything.
New cases for what 3.6.0 adds:
- copy_file_range over several calls, into the middle of a file, past
its end, at the source's end, and from a file whose writes are not
released yet; on a live mount also read back from Drive.
- pdfs copy of a tree and of a file beside itself, read back as listed
and after a refresh, with nothing queued; refused while a file has
writes Drive lacks, and never the version before a save (B256).
- pdfs du counts every item below a folder, trash included.
- pdfs public-link update keeps the URL and the options it was not
asked to change, and refuses a link id that is not the folder's.
- In a sync folder of their own: Sync From Scratch changes nothing that
already matched, and an emptied mirror folder still switches to
on-demand with every file intact on Drive (B255).
docs/TESTING.md gains a checklist for the new screens in the app. The
CHANGELOG moves these into 3.6.0, which is not tagged yet.
Scripts, the acceptance suite among them, can now read a link's id,
role, password flag and expiry, and a folder's size and item count,
instead of parsing the human-readable lines.
The probe that sees the link return runs 2 s after the drop, then 6 s.
A loaded run could turn the link back on after the first probe, and the
next one came after the test's 3 s were up. The test now checks that the
drain takes the mount offline within 2 s, which is the B189 fix itself,
and counts the 3 s from the mount reporting it is back online.
The first pass over a synced folder has no baseline to estimate from, so
its scan showed only "checking for changes…" in the app and "scanning…"
in `pdfs sync list`. For a large folder that scan reads every item on
Proton Drive before anything downloads, which takes many minutes and
looked stuck. Both now show how many items the scan has checked so far.
A mirror folder whose files were all gone from this computer stayed in
error for good. The wipe guard rightly refuses to trash the whole folder
on Drive, but nothing got the folder out of that state: a queued switch
to on-demand waits for a pass that ends idle, and its push pass hit the
same guard. Only removing the folder from sync cleared the baseline that
made the empty folder read as "delete everything".
- The push pass for a switch to on-demand forgets the baseline rows of a
local copy that is gone in full instead of trashing them, so the
switch goes ahead and the mount shows what Drive has.
- New Request::ResetSyncFolder, `pdfs sync reset ID` and "Sync From
Scratch…" in a synced folder's menu clear a mirror folder's baseline
(and a queued switch to on-demand, whose push pass would upload a
duplicate of every file). The next pass compares both sides as on the
first sync: one-sided files are copied across, files that differ keep
both versions, nothing is deleted.
- The wipe guards' messages name the reset; restore logs why it skipped
a folder.
Two simulations cover it. The on-demand one failed in exactly the
reported state (mirror, pending ondemand, error) before the fix.
All 8 catalogs translated.
close(2) returns before the kernel sends release, and release takes the
write handle out of the open writes a few milliseconds before the
revision is in the queue. A `pdfs copy` checked in that gap found the
edit nowhere and copied the version Drive had. A folder copy looked only
at the queue, so it also missed files below it still open with unsaved
writes.
release now keeps the inode in State::releasing until the revision is
queued. A copy refuses a file or folder with unsaved writes, or a
release still queueing, at it or below it, and a move checks the same
set.
A copy inside the mount went through the kernel's read/write loop, one
FUSE round trip per page, because copy_file_range answered ENOSYS. The
daemon now copies a range whose source bytes are local (an open write
handle, a queued write, the cache) into the destination's scratch file,
the same way write stages them. A range it would have to download gets
EOPNOTSUPP, which makes the kernel copy that one call itself and keeps
the operation enabled. The copy still uploads: Drive cannot copy into a
file cp has already created.
In the simulation, a warm cp of a 256 MiB file went from about
100 MiB/s to about 450 MiB/s (debug build).
The share dialog gets Link settings under an existing link: role, password
and expiry apply at once and keep the URL. The daemon fills in the options a
change keeps from the link as it stands, and refuses to keep a password it
cannot read rather than dropping it. pdfs public-link update does the same
from a terminal, and pdfs members shows the expiry.
Details shows a folder's size and item count as Proton Drive counts it,
trash included, and pdfs du prints it. Both are refused offline and for a
folder that is not on Drive yet.
Needs proton-drive-rs with update_public_link, get_folder_size and
PublicLink::custom_password.
The entry menu gains Make a Copy, which copies an item next to itself, and
Copy To…, which reuses the move folder picker limited to My files; Copy
To… is also in the selection menu. Both send Request::Copy, so the copy is
made on Proton Drive.
The move and copy reports share one request loop. Docs describe the new
actions, and the changelog notes that saved public links now show their
names once the SDK decrypts them.
`pdfs copy PATH... NEW_PARENT` sends a new control request, Copy, which
copies a file with its content or a folder with its subtree on Proton
Drive through proton-drive-rs's copy_node. Nothing is downloaded or
uploaded. A name already taken in the destination gets the next free
" (n)" suffix through get_available_name.
A copy cannot wait in the queue, because Drive copies what it holds.
So it is refused offline, and while the mount still owes Drive part of
the node: a local placeholder, a queued op, unsaved writes, or, for a
folder, any queued op at all. Local-first does not change this.
DriveApi gains copy_node and get_available_name, and the fake drive
copies subtrees, so a FUSE sim test covers the copy, the suffix, the
folder subtree and both refusals. The activity feed logs a new Copy
kind, translated in every catalog.
Needs the proton-drive-rs release that adds copy_node; until then, build
with a [patch.crates-io] pointing at proton-sdk-rs.
- scripts/publish-wiki.sh publishes every page listed in SECTIONS, copies
images, writes a sectioned sidebar and footer, and removes stale pages.
--check fails on links to missing files or headings and on docs pages
that are neither published nor excluded.
- New wiki.yml runs the check on pull requests and pushes to main, and
publishes when release.yml calls it or when started by hand.
- Split USER_GUIDE.md into topic pages (files, synced folders, photos,
sharing, computers, launcher and tray); add Getting started and FAQ.
- Make the COPR repository the main Fedora path, with update and
uninstall steps for every package type.
- Fix the stale CAPTCHA note in CLI.md, document pdfs unlock and lock,
and drop the broken AGENTS.md link from CONTRIBUTING.md.
When the session is stored and unlocked but the daemon does not answer,
pdfs diagnose asks Proton for a key report and prints a Keys section:
each account key, each address key and the account key its token is
for, and the address key the My Files share is encrypted to. It holds
key IDs only, so it can be posted in an issue.
Refs #40
Preferences gets a switch that asks GitHub once a day for the latest
release and shows a banner over the sidebar when it is newer. Off by
default. Packages whose package manager brings updates install the
marker share/proton-drive-linux/managed-updates, which hides the switch.
Refs #42
The spec builds from the tag archive and a vendored crates tarball when
git_dir is not defined, so COPR can build it without network access.
release.yml publishes the vendor tarball and submits the build to COPR
after the release is published.
Refs #42
A mirror upload that Drive did not list yet when it was read back left a
baseline row with no revision id. The next walk reused the recorded size
whenever the modification time matched, and a row without an id never
counts as moved. So a revision another computer saved in the same second
looked unchanged and never arrived (B254). The B250 simulation hit this
about one run in five on CI.
A row without an id now reuses its size only while Drive gives no id
either. Otherwise the walk reads the size, and an unchanged file gets
Drive's revision id written into its row, so each row costs one extra
read. Rows from before schema 44 are read once after upgrading.
nvrl
Nils Pukropp