fc-match reports a variable font's named instance in the high 16 bits of
%{index}. Fedora's variable Noto Sans CJK answered 262144, egui read that
as a face index, and panicked on the font it could not parse. Keep only
the face, and parse the fallback with skrifa first so a font egui cannot
read is left out instead.
Fixes#1
The app is listed in the TV launcher with a banner, and neither a touch
screen nor leanback is required. While the controls are down the player
takes D-pad left and right as a ten-second seek, the middle button as
bringing the controls up, and play/pause and space as they say.
A BGProcessingTask runs the same crawl_for_news no sooner than every six
hours, when iOS chooses. A processing task rather than an app refresh,
since a crawl of a large share does not fit in thirty seconds.
Picture-in-Picture was removed from the Android client, but B40 still
read as a live fix, B42 stayed open on a `pending` PiP case that no
longer exists, and two code comments still named it. PLAN.md marked
every recommendation done; its status now lists the ones a source
review found short.
Metadata was only fetched after adding a share (mobile) or from the
Settings buttons (desktop), so a show or episode that turned up in an
existing share stayed bare. Every crawl is now followed by a match run
when enrichment is on; `plan` makes no requests for a library that is
already matched. A stored episode guide is fetched again when a file
newer than it has no named entry, and daily for two weeks while an
aired episode is still unnamed.
Removing a share now carries its watch state to any other share holding
the same file, `pstr remove` drops the share's catalog rows, and the app
forgets catalog rows of shares no longer configured — an older `pstr
remove` left them, and every episode showed twice.
iOS, for a slow iPad:
- swipe back on a settings page uses its own edge strip; on the whole
page it also pressed the row under the finger and opened the metadata
sheet
- "Change match" from the tile menu opens once the menu has dismissed,
not after a guessed 350 ms that a slow device missed
- the activity banner tracks each running line by itself (also Android),
so overlapping work no longer leaves it spinning forever
- buttons, tiles and rows draw their press; marking watched shows at
once; remove/repair share, sign out and deletions show the banner;
the player says "Opening…" while the stream opens
- posters are read into a reserved buffer instead of a byte at a time
Sync carried only watch positions, so a second device started empty. The
per-installation history file now also carries per-key registers
(pstr-core::profile): every share with its link and custom password, the
playback, appearance and metadata settings, the TMDB key, hand-picked
matches and per-title track choices. Newer updated_at wins per key, a
removal travels as an empty register, and a first sync stamps at 0 so a
fresh install takes the library the other devices have instead of
overwriting it with defaults. Volume, mute and the device-only settings
(cache budget, Wi-Fi only, background audio, hardware decoding) stay out.
The secrets live only in the end-to-end encrypted Drive file, never in
shares.json. FORMAT_VERSION stays 1; an older build ignores the registers.
Adding a share stored it before opening the link, so a first failure left a
broken entry and every retry said "already configured". add_verified opens
the link first and stores nothing on failure, and only the new share is
crawled afterwards, so another broken share cannot fail the add.
Android drops picture-in-picture: the window sized the video wrongly and
background audio already covers leaving the app.
iOS sizes the Metal drawable on every layout, so the picture no longer
stretches after a rotation or a Split View resize. Settings show a save at
once rather than after the match run, and a failed save reverts and says
why. Both phone clients gain an activity banner naming what is running, and
the add-share, metadata and change-match forms show progress and errors in
place.
The release calls ios.yml after the version check, as it does android.yml,
and attaches proton-stream-<version>-ios.ipa next to the other artifacts and
in SHA256SUMS.
The iOS client is now a screen-for-screen port of the Android app over the
same pstr-android UniFFI surface, with no Rust changes: Library, title page,
History, Shares (public links and Drive folders), Downloads and Settings,
with the same strings, undo snackbars and two-pane layout on wide screens.
- Theme from the engine's palette (Material role names, Inter, the same
type ramp and corners), repainted live from the appearance settings.
- Account sign-in with two-factor code, mailbox password and the Proton
CAPTCHA in a non-persistent WKWebView, the Drive folder browser, and
watch-history sync every five minutes, after sign-in, on player close and
when the app leaves the screen.
- Player over libmpv: resume, progress saved every 5 s, autoplay with the
up-next card, skip and auto-skip from the chapter plan, track, speed,
volume and episode pickers, landscape lock, mini transport, and
lock-screen controls with interruption and route-change handling.
- Offline downloads with the Android record format, free-space floor,
retries, transfer rate and the Wi-Fi-only policy; interrupted transfers
resume at next launch.
- Config, data and download state are excluded from backup, as Android's
allowBackup=false: a restore would bring shares back without their
Keychain secrets and give two devices one sync identity.
Picture-in-picture, the share sheet and background downloads are not
possible the same way on iOS; docs/IOS.md lists why and what replaces them.
Adds XCTest ports of the Android unit tests, a `test` command to
scripts/build-ios.sh, the app icon and its render script, and an iOS
workflow on macos-15 that runs the tests and builds the unsigned .ipa.
Moves to proton-sdk / proton-drive-rs 0.7.3.
The stored Proton session now holds, per account key, the passphrase derived
from the mailbox password at sign-in, and resumes through
`ProtonDriveClient::with_key_passphrases`. The mailbox password — on a
single-password account, the login password — and the key salts are no longer
stored. A session in the earlier shape, which only development builds of
1.2.0 wrote, reads as signed out: signing in again replaces it.
An account whose only second factor is a security key is refused at sign-in
with a reason, rather than asked for a code that can only fail as a wrong one.
The code prompts now say plainly that security keys are not supported.
- Desktop shows Proton's CAPTCHA instead of failing the sign-in: a wry webview
in a child process of the app (`pstr-app::verify`), confined to
https://*.proton.me, hands the token back and the sign-in is retried. Linux
packages and CI gain WebKitGTK 4.1; the Windows zip and MSI ship
WebView2Loader.dll, without which a -gnu build does not start.
- The desktop keyring splits a secret too long for one entry across several,
so a Proton session with many key salts survives Windows' 1280-unit cap.
Short secrets stay one entry, so every existing secret still reads.
- `WatchSync` runs against a small `HistoryDrive` trait and is tested end to
end against an in-memory Drive: two devices, newer wins, no re-upload of an
unchanged history, a missing file written again, an unreadable own file
never overwritten, a newer-format file left alone.
- An installation's file unwritten for 90 days is retired by the next device
to sync, after its entries are merged and carried in that device's file.
- Removing a share keeps its watch state: sync would bring it back from the
other devices anyway, and re-adding the share picks up where it left off.
- Watch history syncs once more on desktop exit (bounded to 3 s) and, on
Android, through a WorkManager job enqueued when the app leaves the screen.
- The second-factor prompts say security keys are not supported.
A Proton account is now optional alongside public links. Signing in (password,
then a second-factor code and a mailbox password where the account has them;
a CAPTCHA gate is solved in the Android app) stores one session blob in the OS
credential store under `proton-account`, writing back every refreshed token
since refresh tokens are single-use. With an account, folders of the viewer's
own Drive — My Files, other devices, shared with me — can be added as shares
through the same `ShareClient` surface as a public link.
Watch history syncs through a `proton-stream` device in that Drive: one
`watch-history/<installation>.json` per installation, so no two devices ever
write the same file. Each sync reads the others and merges per episode, newer
`updated_at` wins, with a deterministic tie-break. It runs at launch, after
sign-in, whenever the player closes and every five minutes. A session that can
no longer refresh signs the app out instead of failing on every launch.
The CLI gains `login`, `logout`, `account`, `browse` and `sync`.
Also in this change:
- Android offline downloads no longer look stuck (B64): two transfer at once,
through a copy stream with no read-ahead, with a smoothed transfer rate.
- Choosing a metadata match by hand now enriches the title too, instead of
keeping the old match's episodes and artwork.
The catalog schema is unchanged.
An MSI upgrade left the app without libmpv-2.dll until it was installed a
second time (B62). Costing runs before RemoveExistingProducts, saw the old
DLL at the same version and skipped the copy, and removing the old product
then deleted it. Both installer definitions now set REINSTALLMODE=amus;
every file is private to the install directory.
A taskbar pin lost its icon after a while (B63). The exe carried no icon
resource, and the Start Menu shortcut's icon lived in the per-ProductCode
installer cache that each upgrade deletes. build.rs now compiles the .ico
into proton-stream.exe, and the shortcut has no Icon of its own (and in the
WiX build is no longer advertised), so both show the exe's icon.
Upstream mpv-android moved its build to NDK r30 (30.0.16248370), and each
mpv-android revision pins its own NDK, so the two move together. The new
revision also updates harfbuzz to 14.5.0, unibreak to 8.0, fribidi to
1.0.17, libxml2 to 2.15.4, fontconfig to 2.18.3 and curl to 8.22.0, and
builds libass with assembly on x86_64 (nasm, already installed in CI).
r30 brings an LLVM update with codegen and LTO fixes and sysroots up to
API 37. It is also the NDK current SDK managers install, so a fresh setup
no longer needs r29 installed beside it.
The script change invalidates the cached libmpv tree, so CI rebuilds it
once. The staged libraries are the same set as before, all 16 KiB aligned.
Bring the phase 2 library to Android. Search, sorting and franchise folding
move from the desktop app into pstr_core::browse, so both clients find,
fold and order the same titles the same way.
The bridge gains AndroidEngine::arrangement, which returns the grid's tiles
and up to three shelves as keys into the library's titles. Each TitleRecord
now carries its display name, wide art, format, season, studios, directors,
tags, airing state and franchise. The library bar has a sort menu with the
franchise toggle, folded tiles show a +N badge, and shelves sit above the
grid. The title page shows the same facts, tags and franchise row as the
desktop. Settings -> Appearance gains Title names.
The default title name is now English, which is what Android always showed.
A folded franchise now sorts by its lead's displayed name rather than by its
alphabetically first member.
The AniList query now keeps the start date, season, banner, popularity,
status, next airing episode, tags, main studios, director and story
relations, as TitleDetails in one JSON column (schema v10). Matches
stored without them are fetched again by id, never searched, so
hand-picked matches stay; refreshing the same entry keeps its episodes
and fanart. Enrichment records the entries it walked. node_first_seen
remembers when each file appeared, across recrawls.
pstr_core::franchise groups titles that share a provider id. The grid
folds each franchise into its lead with a +N badge, and the title page
lists the whole franchise in release order. pstr_core::shelves picks
rows by airing status, director, studio and genre. A row needs three
franchises, so one franchise's titles never make a row on their own.
Desktop:
- Covers are the default grid (Settings > Appearance > Library tiles).
- The hero and title band use fanart or banner decoded at 1920 px.
- New sorts: recently added, newest, highest rated, most popular.
- Titles can show the share's, English or romaji name; search matches
all of them.
Android carries TitleDetails through a hand-picked match; its screens
are unchanged.
AniList's per-season lookup searched for "<title> 2nd Season" and the
scorer picked the base entry again, so Attack on Titan seasons 2-4 and
Jigokuraku season 2 were captioned with season one's names. Episode
names came from streamingEpisodes, which is partial and numbered however
a streaming site counted. Bleach S17 and Mushishi S02/S03 had none.
AniList now walks SEQUEL relations from the match and takes each
entry's episodes from ani.zip, which carries TVDB's season, number and
absolute number. An episode row keeps all three plus its place in the
AniList entry. EpisodeGuide::get matches whichever numbering a file
uses and never answers from another season.
Episodes and fanart are stored as one enrichment. The episode list is
replaced even when empty, and the enrichment is recorded as asked, so a
film is not re-asked every run. Storing a different match drops the old
entry's episode rows. AniList's 4.75:1 bannerImage is no longer stored
as the 16:9 backdrop; ani.zip's 1920x1080 fanart is used instead.
Schema v9 adds the columns and deletes the AniList episode rows and
banners. Matches are kept. Desktop, Android and the CLI now share
service::plan and MetadataService::work. The settings text names
ani.zip. Audit and roadmap in docs/METADATA.md; bug entry B61.
History sits second in the navigation, as on the desktop: every played
episode, newest first, under Today, Yesterday, a weekday or a date. The
still plays the episode, the text opens its title, and the cross takes
it off the page — forgetting its position and watched mark — with Undo.
The list is the desktop's Library::history rule over the records the
library already holds, so no bridge call is added; HistoryTest pins the
rule and the day headings.
Roborazzi draws Library (phone, tablet, font scale 1.5, empty), a title,
Shares, Settings and Downloads from fixed records under Robolectric, and
build-android.sh check compares them with the committed images in
app/src/test/screenshots. The redesign changes every screen; a layout
regression now fails the gate and shows up in review as a changed image.
Toasts through WinRT, under the app id io.narl.proton-stream. The id is
registered for the current user under HKCU\Software\Classes\AppUserModelId
with a display name and icon on the first notification of a session, which
is what lets an app with no package or installer-made shortcut show one. If
that write fails, the toast goes out under PowerShell's id rather than not
at all.
A second launch hands its request to the open window and exits: over a
Unix socket in the user's runtime directory, or a named pipe on Windows
whose name carries a random key from the user's config directory, so
another account cannot take the name first. The open window comes forward,
and a share link given as the first such argument opens the Add form with
it filled in. Setup failures are logged and the app runs without the lock.
theme::space, theme::radius and theme::motion name the steps the UI is
drawn with. Literal gaps, corner radii and animation durations across ui/
now come from them, which folds a few near-misses onto the scale (10 and 14
point gaps onto 12, 10 point radii onto 12, 0.10 s hovers onto 0.12 s).
Page fades and toasts share one ease_out curve.
Headings are set in Inter SemiBold, everything else in Inter Regular, so a
title sets the same on every desktop. Media and navigation glyphs (⏭, 🔊, ⛶,
★) come from the Phosphor icon font instead of whichever fallback font had
them. The CJK fallback still loads on its own thread and now joins the
bundled fonts instead of replacing them. The window carries the app icon
on X11 and Windows.
- toasts replace the status line; keyboard shortcuts with a ? overlay
- library: filters, sort, row virtualisation, cached search, skeleton
tiles until the catalog loads, gradient placeholder art
- title page: season pills, episode rows with stills and one download
glyph, portrait poster, clamped overview, resume time in the button
- player: fading chrome, smooth scrims, subtitles lifted over the
controls, drag-following seek knob, OSD, speed menu, auto-skip
- settings as grouped cards with toggles and palette previews
- shares: confirm before removing, inline link validation, form kept
until the add succeeds; downloads scroll and show rate and ETA
- downloads pipeline four blocks; the next episode is warmed near the end
- a film behind another page repaints at 4 Hz, not its frame rate
Fixes B55-B60.
A track picked on one episode now carries over to the next by its title as
well as its language, so e.g. "Signs & Songs" vs "Full" subtitles in the same
language stick. Catalog migration V8 adds the title columns; the Android
bridge keeps a stored title only while its language is unchanged.
B14-B42 record the Android review the theme and lifecycle work came out of.
DESIGN-TOKENS.md states what both clients agree on and where each keeps its
copy.
nvrl