- The full player overlay had no Stop: Esc leaves the page and keeps
playing, so ending an episode took a trip to the bar underneath. It has
a Stop button now, and stopping from fullscreen leaves fullscreen.
- `F` toggled the app's own idea of fullscreen, which the window manager
could change behind it (F11, a title-bar double-click). The flag now
follows the window.
- The speed menu stopped at 2x while `]` went to 3x.
Picture-in-Picture was removed from the Android client, but B40 still
read as a live fix, B42 stayed open on a `pending` PiP case that no
longer exists, and two code comments still named it. PLAN.md marked
every recommendation done; its status now lists the ones a source
review found short.
- The idle timer was recomputed only when Now Playing was republished,
so minimising and then reopening a playing episode let the screen
sleep under it. It now follows `minimized` too.
- With background audio off, leaving the app paused but left video on,
so lock-screen Play started decoding into an unseen layer. Video goes
off on the way out either way.
- Now Playing reported full speed through a stall, and its clock ran on.
Buffering now reports a rate of zero.
- The lock screen gains ten-second skip forward and back.
Delete season, Delete show, the episode's Done badge and the Downloads
page's Delete all went straight to removing the files, with no question
and no undo - gigabytes of a season a misclick away. They now share one
confirmation that names what goes and says the share keeps the files.
The empty library said to add a link "under Shares, then refresh" with
nothing to press on the phones, and on the desktop only switched page.
All three now open the add form from there, the desktop with the caret
in the link field; and adding already crawls, so there is nothing to
refresh.
A share's name was required before the viewer had seen anything to name.
It is optional now: without one, ShareStore::add_verified takes the
shared folder's own name from the link it has just opened. The link
comes first in each form. The desktop form submits on Enter, and the
Android link field has an eye to check what was pasted.
No client crawled a share unless someone pressed Refresh, so a new
episode stayed out of the library until then, and nothing said how stale
the library was.
Catalog schema v11 adds share_crawls: when each share's last crawl
finished and was attempted, how many files it stored and how many were
new, and why the last attempt failed. A failure keeps the last good
crawl's numbers.
Every client now crawls, quietly, any share not looked at for six hours:
the desktop at launch and every half hour while open, the phones at
launch and on their existing catch-up timer. A quiet crawl says only
news ("anime: 3 new files") and leaves failures on the share's row
rather than in a toast.
Share rows on all three show "120 files - crawled 2 h ago", or the last
failure until a crawl succeeds.
Continue watching listed only part-watched episodes, so finishing one -
the most ordinary moment to want the next - dropped the show from the
shelf. Title::continue_with now reads the episode touched last: a
part-watched one is resumed, a finished one offers the episode after it
("Next: S01E04"), and one reset to the start (what leaving the shelf
does) keeps the title off. A few seconds of an episode are passed over.
The phones computed their own shelf from episode records. The bridge now
exports the engine's choice as TitleRecord.continue_index, and Play on a
title lands there on every client.
Undo on the phones re-saved a watch state with a fresh time, which both
reordered the shelf and could not express "never played". A new
restore_watch_state puts the state back as it was read.
The up-next countdown only ran over a credits chapter, so a file with no
chapters - most that are not anime - cut straight into the next episode
with no warning and no way to stay. Such a file now shows the same card
over its last ten seconds, counted on the file's own clock so it reaches
zero at the end of file, and its second button is Cancel rather than
Watch till the end.
On the phones, an episode that ends with nothing after it - the last one,
autoplay off, or cancelled - left a black screen. It now says so, with
Play next or Watch again, and Close.
Android also:
- saves the resume position from PlaybackService rather than the player
screen. With background audio on the service outlives the activity, and
a position only the screen kept stopped being saved when it went. A swipe
from Recents saves and stops instead of playing on with nothing to
return to.
- shows "Opening <episode>..." while the stream opens, where there was a
black screen for as long as the share session and block list took.
A file mpv gave up on partway ended the desktop player without a word:
the page went back to the title and the film was simply gone. It now
leaves an error toast naming where it stopped, with Retry reopening the
episode at that position.
The phone players already showed an error, but its only button was
Dismiss, so a dropped connection meant backing out and finding the
episode again. They gain Retry, which opens a fresh stream (through the
session refresh) from where the failed one stopped. A stall that lasts
twenty seconds now says so and offers the same, rather than showing
"Buffering…" for ever.
The age check and the one retry behind a refresh (B22) lived only in the
Android bridge. The desktop opened streams, offline copies and crawls
against whatever session the share was opened with, so a window left open
for a few hours failed to play or recrawl until it was restarted.
The logic moves to pstr-core as SessionAges, owned by SharedLibrary and
reached through SharedLibrary::reauthenticating. Both engines go through
it for play, warm, offline copy and (desktop) crawl.
After "next episode" during the credits, the previous file keeps
playing until the new stream is open. Its chapters and position were
read against the already-advanced index, so the up-next card offered
the episode after the next one for those seconds. The card, the skip
offer and auto-skip now only act on readings of the open episode.
Metadata was only fetched after adding a share (mobile) or from the
Settings buttons (desktop), so a show or episode that turned up in an
existing share stayed bare. Every crawl is now followed by a match run
when enrichment is on; `plan` makes no requests for a library that is
already matched. A stored episode guide is fetched again when a file
newer than it has no named entry, and daily for two weeks while an
aired episode is still unnamed.
Removing a share now carries its watch state to any other share holding
the same file, `pstr remove` drops the share's catalog rows, and the app
forgets catalog rows of shares no longer configured — an older `pstr
remove` left them, and every episode showed twice.
iOS, for a slow iPad:
- swipe back on a settings page uses its own edge strip; on the whole
page it also pressed the row under the finger and opened the metadata
sheet
- "Change match" from the tile menu opens once the menu has dismissed,
not after a guessed 350 ms that a slow device missed
- the activity banner tracks each running line by itself (also Android),
so overlapping work no longer leaves it spinning forever
- buttons, tiles and rows draw their press; marking watched shows at
once; remove/repair share, sign out and deletions show the banner;
the player says "Opening…" while the stream opens
- posters are read into a reserved buffer instead of a byte at a time
Minor. Sync now carries the whole library, not only watch positions:
shares with their links and passwords, playback, appearance and metadata
settings, the TMDB key, hand-picked matches and per-title tracks, so every
signed-in device shows the same library. Devices share it once all of them
run 1.4.0; an older build keeps syncing watch positions and ignores the
rest.
Android drops picture-in-picture. iOS fixes the stretched player after a
rotation or resize, the share that failed to add on the first try, and
settings that saved late or silently. Both phone clients now show what is
running and why a form was refused.
No catalog schema change since 1.3.0.
Sync carried only watch positions, so a second device started empty. The
per-installation history file now also carries per-key registers
(pstr-core::profile): every share with its link and custom password, the
playback, appearance and metadata settings, the TMDB key, hand-picked
matches and per-title track choices. Newer updated_at wins per key, a
removal travels as an empty register, and a first sync stamps at 0 so a
fresh install takes the library the other devices have instead of
overwriting it with defaults. Volume, mute and the device-only settings
(cache budget, Wi-Fi only, background audio, hardware decoding) stay out.
The secrets live only in the end-to-end encrypted Drive file, never in
shares.json. FORMAT_VERSION stays 1; an older build ignores the registers.
Adding a share stored it before opening the link, so a first failure left a
broken entry and every retry said "already configured". add_verified opens
the link first and stores nothing on failure, and only the new share is
crawled afterwards, so another broken share cannot fail the add.
Android drops picture-in-picture: the window sized the video wrongly and
background audio already covers leaving the app.
iOS sizes the Metal drawable on every layout, so the picture no longer
stretches after a rotation or a Split View resize. Settings show a save at
once rather than after the match run, and a failed save reverts and says
why. Both phone clients gain an activity banner naming what is running, and
the add-share, metadata and change-match forms show progress and errors in
place.
Minor. One new client: an iOS 17+ app, a SwiftUI port of the Android one
over the same Rust engine, published as an unsigned .ipa for SideStore and
AltStore. docs/IOS.md lists where iOS cannot follow Android: no
picture-in-picture, links come in through the protonstream:// scheme or
Paste link rather than the share sheet, and downloads run while the app
does.
No change to the Rust crates, the catalog schema or the desktop and Android
clients since 1.2.0.
The release calls ios.yml after the version check, as it does android.yml,
and attaches proton-stream-<version>-ios.ipa next to the other artifacts and
in SHA256SUMS.
The iOS client is now a screen-for-screen port of the Android app over the
same pstr-android UniFFI surface, with no Rust changes: Library, title page,
History, Shares (public links and Drive folders), Downloads and Settings,
with the same strings, undo snackbars and two-pane layout on wide screens.
- Theme from the engine's palette (Material role names, Inter, the same
type ramp and corners), repainted live from the appearance settings.
- Account sign-in with two-factor code, mailbox password and the Proton
CAPTCHA in a non-persistent WKWebView, the Drive folder browser, and
watch-history sync every five minutes, after sign-in, on player close and
when the app leaves the screen.
- Player over libmpv: resume, progress saved every 5 s, autoplay with the
up-next card, skip and auto-skip from the chapter plan, track, speed,
volume and episode pickers, landscape lock, mini transport, and
lock-screen controls with interruption and route-change handling.
- Offline downloads with the Android record format, free-space floor,
retries, transfer rate and the Wi-Fi-only policy; interrupted transfers
resume at next launch.
- Config, data and download state are excluded from backup, as Android's
allowBackup=false: a restore would bring shares back without their
Keychain secrets and give two devices one sync identity.
Picture-in-picture, the share sheet and background downloads are not
possible the same way on iOS; docs/IOS.md lists why and what replaces them.
Adds XCTest ports of the Android unit tests, a `test` command to
scripts/build-ios.sh, the app icon and its render script, and an iOS
workflow on macos-15 that runs the tests and builds the unsigned .ipa.
Moves to proton-sdk / proton-drive-rs 0.7.3.
The stored Proton session now holds, per account key, the passphrase derived
from the mailbox password at sign-in, and resumes through
`ProtonDriveClient::with_key_passphrases`. The mailbox password — on a
single-password account, the login password — and the key salts are no longer
stored. A session in the earlier shape, which only development builds of
1.2.0 wrote, reads as signed out: signing in again replaces it.
An account whose only second factor is a security key is refused at sign-in
with a reason, rather than asked for a code that can only fail as a wrong one.
The code prompts now say plainly that security keys are not supported.
- Desktop shows Proton's CAPTCHA instead of failing the sign-in: a wry webview
in a child process of the app (`pstr-app::verify`), confined to
https://*.proton.me, hands the token back and the sign-in is retried. Linux
packages and CI gain WebKitGTK 4.1; the Windows zip and MSI ship
WebView2Loader.dll, without which a -gnu build does not start.
- The desktop keyring splits a secret too long for one entry across several,
so a Proton session with many key salts survives Windows' 1280-unit cap.
Short secrets stay one entry, so every existing secret still reads.
- `WatchSync` runs against a small `HistoryDrive` trait and is tested end to
end against an in-memory Drive: two devices, newer wins, no re-upload of an
unchanged history, a missing file written again, an unreadable own file
never overwritten, a newer-format file left alone.
- An installation's file unwritten for 90 days is retired by the next device
to sync, after its entries are merged and carried in that device's file.
- Removing a share keeps its watch state: sync would bring it back from the
other devices anyway, and re-adding the share picks up where it left off.
- Watch history syncs once more on desktop exit (bounded to 3 s) and, on
Android, through a WorkManager job enqueued when the app leaves the screen.
- The second-factor prompts say security keys are not supported.
Minor. Two new features, both optional and both behind signing in to a Proton
account:
- Sign in with a Proton account (password, two-factor code, separate mailbox
password) on desktop, Android and the CLI, and add folders of your own Drive
— My Files, other devices, shared with me — as library shares next to public
links. The session lives in the OS credential store, never in shares.json.
- Watch history follows you across devices. Each installation keeps its own
file on a `proton-stream` device in your Drive and merges everyone else's
per episode, newest position wins. It syncs at launch, after sign-in, when
the player closes and every five minutes.
Also: Android offline downloads no longer look stuck (B64), and picking a
metadata match by hand refreshes the title's episodes and artwork.
The catalog schema is unchanged from 1.1.3. A new `sync.json` beside
`shares.json` holds this installation's sync id.
A Proton account is now optional alongside public links. Signing in (password,
then a second-factor code and a mailbox password where the account has them;
a CAPTCHA gate is solved in the Android app) stores one session blob in the OS
credential store under `proton-account`, writing back every refreshed token
since refresh tokens are single-use. With an account, folders of the viewer's
own Drive — My Files, other devices, shared with me — can be added as shares
through the same `ShareClient` surface as a public link.
Watch history syncs through a `proton-stream` device in that Drive: one
`watch-history/<installation>.json` per installation, so no two devices ever
write the same file. Each sync reads the others and merges per episode, newer
`updated_at` wins, with a deterministic tie-break. It runs at launch, after
sign-in, whenever the player closes and every five minutes. A session that can
no longer refresh signs the app out instead of failing on every launch.
The CLI gains `login`, `logout`, `account`, `browse` and `sync`.
Also in this change:
- Android offline downloads no longer look stuck (B64): two transfer at once,
through a copy stream with no read-ahead, with a smoothed transfer rate.
- Choosing a metadata match by hand now enriches the title too, instead of
keeping the old match's episodes and artwork.
The catalog schema is unchanged.
Patch. Fixes two Windows installer defects: an MSI upgrade no longer leaves
the app without libmpv until a second install (B62), and a taskbar pin keeps
its icon, which the exe now carries itself (B63). The catalog schema and
on-disk data are unchanged from 1.1.2.
An MSI upgrade left the app without libmpv-2.dll until it was installed a
second time (B62). Costing runs before RemoveExistingProducts, saw the old
DLL at the same version and skipped the copy, and removing the old product
then deleted it. Both installer definitions now set REINSTALLMODE=amus;
every file is private to the install directory.
A taskbar pin lost its icon after a while (B63). The exe carried no icon
resource, and the Start Menu shortcut's icon lived in the per-ProductCode
installer cache that each upgrade deletes. build.rs now compiles the .ico
into proton-stream.exe, and the shortcut has no Icon of its own (and in the
WiX build is no longer advertised), so both show the exe's icon.
Moving the gradient onto a row inside the button lost both: the button's
own row hands its children no minimum size, so a fillMaxWidth button
painted the ramp only behind its label, and with square corners.
The gradient goes back on the button, and the 48dp touch-target padding
is taken by a box around it instead, with the button inside told not to
add its own. The primary button now matches the other buttons' 40dp
container at every width. The screenshots are re-recorded for it.
Patch. The only change since 1.1.1 is on Android: the primary button on the
library hero no longer draws taller than the button beside it. The catalog
schema and on-disk data are unchanged from 1.1.1.
The gradient sat on the outer modifier, which Material pads out to the
48dp minimum touch target, so the primary button drew 8dp taller than
the 40dp tonal button beside it on the library hero.
Patch, not minor. Nothing a viewer uses changes: the Android build moves to
NDK r30 and mpv-android 687c7fd, which brings newer harfbuzz, fribidi,
unibreak, fontconfig, libxml2 and curl into the bundled libmpv. The catalog
schema and on-disk data are unchanged from 1.1.0.
Upstream mpv-android moved its build to NDK r30 (30.0.16248370), and each
mpv-android revision pins its own NDK, so the two move together. The new
revision also updates harfbuzz to 14.5.0, unibreak to 8.0, fribidi to
1.0.17, libxml2 to 2.15.4, fontconfig to 2.18.3 and curl to 8.22.0, and
builds libass with assembly on x86_64 (nasm, already installed in CI).
r30 brings an LLVM update with codegen and LTO fixes and sysroots up to
API 37. It is also the NDK current SDK managers install, so a fresh setup
no longer needs r29 installed beside it.
The script change invalidates the cached libmpv tree, so CI rebuilds it
once. The staged libraries are the same set as before, all 16 KiB aligned.
Bring the phase 2 library to Android. Search, sorting and franchise folding
move from the desktop app into pstr_core::browse, so both clients find,
fold and order the same titles the same way.
The bridge gains AndroidEngine::arrangement, which returns the grid's tiles
and up to three shelves as keys into the library's titles. Each TitleRecord
now carries its display name, wide art, format, season, studios, directors,
tags, airing state and franchise. The library bar has a sort menu with the
franchise toggle, folded tiles show a +N badge, and shelves sit above the
grid. The title page shows the same facts, tags and franchise row as the
desktop. Settings -> Appearance gains Title names.
The default title name is now English, which is what Android always showed.
A folded franchise now sorts by its lead's displayed name rather than by its
alphabetically first member.
Minor, not patch. This release adds features and changes on-disk data:
- ani.zip episode names and fanart.
- Franchise grouping, shelves, poster grid and new sorts.
- Two catalog migrations (v9, v10). Catalogs are forward-only, so 1.0.x
refuses to open a catalog 1.1.0 has upgraded.
The first match run after upgrading fetches every title's details and
episode list again. It refetches by id and does not search, so
hand-picked matches are kept.
The AniList query now keeps the start date, season, banner, popularity,
status, next airing episode, tags, main studios, director and story
relations, as TitleDetails in one JSON column (schema v10). Matches
stored without them are fetched again by id, never searched, so
hand-picked matches stay; refreshing the same entry keeps its episodes
and fanart. Enrichment records the entries it walked. node_first_seen
remembers when each file appeared, across recrawls.
pstr_core::franchise groups titles that share a provider id. The grid
folds each franchise into its lead with a +N badge, and the title page
lists the whole franchise in release order. pstr_core::shelves picks
rows by airing status, director, studio and genre. A row needs three
franchises, so one franchise's titles never make a row on their own.
Desktop:
- Covers are the default grid (Settings > Appearance > Library tiles).
- The hero and title band use fanart or banner decoded at 1920 px.
- New sorts: recently added, newest, highest rated, most popular.
- Titles can show the share's, English or romaji name; search matches
all of them.
Android carries TitleDetails through a hand-picked match; its screens
are unchanged.
AniList's per-season lookup searched for "<title> 2nd Season" and the
scorer picked the base entry again, so Attack on Titan seasons 2-4 and
Jigokuraku season 2 were captioned with season one's names. Episode
names came from streamingEpisodes, which is partial and numbered however
a streaming site counted. Bleach S17 and Mushishi S02/S03 had none.
AniList now walks SEQUEL relations from the match and takes each
entry's episodes from ani.zip, which carries TVDB's season, number and
absolute number. An episode row keeps all three plus its place in the
AniList entry. EpisodeGuide::get matches whichever numbering a file
uses and never answers from another season.
Episodes and fanart are stored as one enrichment. The episode list is
replaced even when empty, and the enrichment is recorded as asked, so a
film is not re-asked every run. Storing a different match drops the old
entry's episode rows. AniList's 4.75:1 bannerImage is no longer stored
as the 16:9 backdrop; ani.zip's 1920x1080 fanart is used instead.
Schema v9 adds the columns and deletes the AniList episode rows and
banners. Matches are kept. Desktop, Android and the CLI now share
service::plan and MetadataService::work. The settings text names
ani.zip. Audit and roadmap in docs/METADATA.md; bug entry B61.
Gradle deletes the declared outputs of a task it has no history for, so
on every fresh checkout buildLibmpvAndroid threw away the libmpv tree just
restored from the cache and rebuilt it from source (~14 min per job). The
task no longer declares outputs; the script's STAMP decides.
rust-cache treats target/android/<triple> as a profile directory and
deletes its release tree before saving, so both cargo-ndk ABIs were
rebuilt from scratch on every run (~6 min per job). It now caches only the
registry and helpers; the target directory goes through actions/cache,
keyed on toolchain and lockfile and restoring from the last lockfile.
enableOnBackInvokedCallback only exists from API 33 and the app runs from
31, which lint reports as UnusedAttribute; tools:targetApi says that is
intended, since older releases ignore it. sharedArt becomes an extension
on Modifier, as Compose lint asks of modifier factories.
The Settings index shows the installed version, read from the package,
so the committed image held 0.5.1 and the 1.0.0 bump failed the
screenshot check. SettingsScreen takes the version as a parameter that
defaults to the package's, and the test passes a fixed one.
From 840 dp wide, the library and the open title share the window, so
moving between titles is one tap and the grid stays where it was; with
nothing open, the right pane says to choose one. On narrower windows, a
poster tapped in the grid grows into the title page's backdrop and
shrinks back on the way out.
The app opts into predictive back. Dragging back on a title page shrinks
the page as the gesture goes and restores it if the gesture is
abandoned.
The screenshot tests now also capture the library and a title in
Catppuccin Latte, and a title and the history page on a tablet. The
tablet capture showed the title page opening on nothing but its
backdrop: a 16:9 picture the width of a landscape tablet is taller than
the window. The backdrop is now no taller than about half the window,
and the rest of the page keeps a phone's reading width, centred.
The tile menu now offers the same provider search as the title page, so
a title wearing the wrong poster can be fixed from the grid that shows
it, without opening the title first.
Saved episodes are list rows with their still, the episode's name rather
than its file, and its size, under a heading per show; the page opens
with how much is on the device. Downloads still arriving come first, with
pause or resume and cancel as icons beside the progress. Deleting a saved
episode now asks first, since getting it back is a download.
The first Settings page lists Playback, Downloads and storage,
Appearance, Metadata and About, each with a line saying where it stands,
and each opens its own page with a way back. On one long page, every
setting added pushed the rest further from reach.
Audio and subtitle language are chosen from a list of languages by name
instead of typed as "jpn or eng". The list stores the three-letter tag a
Matroska file carries, reads a stored tag in either ISO form, and still
takes any other tag typed in.
The single "proton-stream" bar over every page is gone. The library has a
large title that folds away as the grid scrolls, with search and refresh as
icons; search opens into a field in the bar that takes the keyboard at once,
and back closes and clears it. History, Shares, Downloads and Settings each
name themselves in a bar of their own, drawn in the page's background until
content scrolls under it. The title page now draws its backdrop under the
status bar, with the back button below it.
A search with no results says so instead of claiming the library is empty.
A title without artwork shows the accent as a gradient with its initials
instead of a black card with a play triangle, so a library of unmatched
titles is no longer a grid of identical cards. Art with the name already
over it, and episode stills, get the gradient without initials. While
artwork loads, and while the catalog first loads, the page shows pulsing
shapes where the posters will be rather than a spinner.
The screenshot tests turn artwork loading off, so whether a failed fetch
lands before the capture no longer decides what the image shows.
nvrl