The header under the episode's numbering showed `Episode::detail`, which
falls back to the file name — `[Judas] Chainsaw Man - S01E01.mkv` on a
phone, where the desktop shows `Dog & Chainsaw`. It now shows the
provider's name for the episode, else the one the file name gave it, and
nothing rather than the file name: the release group's tag is no caption,
and it is what a screenshot of the player would carry away.
Anime releases often carry two subtitle tracks in one language, the
dialogue and a "Signs & Songs" track, and the second is as often as not
the one marked default or forced. mpv, picking by language, played it.
pstr_core::subtitles reads a track's name and forced flag for whether it
is the dialogue, and every client asks it once per file, after mpv has
made its own pick, whether to switch to a track in the same language
that is. A subtitle track the viewer chose by name stays, and subtitles
that are off stay off.
MPVKit's MoltenVK context reads the layer's drawableSize only when mpv
builds its video output and reports no resize after that (mpvkit/MPVKit#3).
A player opened upright and turned on its side went on drawing the upright
frame into a corner of the landscape drawable. The view now tells the
player when its drawable changes, and once the size settles the player
rebuilds mpv's output by turning the picture off and on, as the background
already does. The vid writes run in order off the main thread.
The bridge's open_subtitles opens and publishes them and names the one to
turn on. The native player holds them until mpv has the episode loaded,
adds them with sub-add, and releases them instead when another episode
was loaded in the meantime.
- Double-tap the left or right third of the picture to seek ten seconds,
with a mark showing the seek happened; the middle plays or pauses.
- A wide picture turns the phone's player to landscape by itself, once
per episode, until the viewer uses the rotation button.
- Upright, the pickers past subtitles go behind a More menu instead of
running off the edge. Controls are 48dp on Android and 44pt on iOS.
- With TalkBack or VoiceOver on, the controls stay up: a control that
fades four seconds after it is reached cannot be found again. The tap
layer is announced as Show or Hide controls.
The bridge's open_stream started no fetch until mpv asked, so every
open was the head and then the tail, one after the other. It now warms
both edges as the desktop does, and the resume block too when the
episode resumes.
warm_episode fetches another episode's opening blocks into the cache
without playing it. Both phones call it for the next episode in the
last two minutes or once the credits start, as the desktop already
did, so autoplay starts from the cache.
- The idle timer was recomputed only when Now Playing was republished,
so minimising and then reopening a playing episode let the screen
sleep under it. It now follows `minimized` too.
- With background audio off, leaving the app paused but left video on,
so lock-screen Play started decoding into an unseen layer. Video goes
off on the way out either way.
- Now Playing reported full speed through a stall, and its clock ran on.
Buffering now reports a rate of zero.
- The lock screen gains ten-second skip forward and back.
The up-next countdown only ran over a credits chapter, so a file with no
chapters - most that are not anime - cut straight into the next episode
with no warning and no way to stay. Such a file now shows the same card
over its last ten seconds, counted on the file's own clock so it reaches
zero at the end of file, and its second button is Cancel rather than
Watch till the end.
On the phones, an episode that ends with nothing after it - the last one,
autoplay off, or cancelled - left a black screen. It now says so, with
Play next or Watch again, and Close.
Android also:
- saves the resume position from PlaybackService rather than the player
screen. With background audio on the service outlives the activity, and
a position only the screen kept stopped being saved when it went. A swipe
from Recents saves and stops instead of playing on with nothing to
return to.
- shows "Opening <episode>..." while the stream opens, where there was a
black screen for as long as the share session and block list took.
A file mpv gave up on partway ended the desktop player without a word:
the page went back to the title and the film was simply gone. It now
leaves an error toast naming where it stopped, with Retry reopening the
episode at that position.
The phone players already showed an error, but its only button was
Dismiss, so a dropped connection meant backing out and finding the
episode again. They gain Retry, which opens a fresh stream (through the
session refresh) from where the failed one stopped. A stall that lasts
twenty seconds now says so and offers the same, rather than showing
"Buffering…" for ever.
After "next episode" during the credits, the previous file keeps
playing until the new stream is open. Its chapters and position were
read against the already-advanced index, so the up-next card offered
the episode after the next one for those seconds. The card, the skip
offer and auto-skip now only act on readings of the open episode.
Metadata was only fetched after adding a share (mobile) or from the
Settings buttons (desktop), so a show or episode that turned up in an
existing share stayed bare. Every crawl is now followed by a match run
when enrichment is on; `plan` makes no requests for a library that is
already matched. A stored episode guide is fetched again when a file
newer than it has no named entry, and daily for two weeks while an
aired episode is still unnamed.
Removing a share now carries its watch state to any other share holding
the same file, `pstr remove` drops the share's catalog rows, and the app
forgets catalog rows of shares no longer configured — an older `pstr
remove` left them, and every episode showed twice.
iOS, for a slow iPad:
- swipe back on a settings page uses its own edge strip; on the whole
page it also pressed the row under the finger and opened the metadata
sheet
- "Change match" from the tile menu opens once the menu has dismissed,
not after a guessed 350 ms that a slow device missed
- the activity banner tracks each running line by itself (also Android),
so overlapping work no longer leaves it spinning forever
- buttons, tiles and rows draw their press; marking watched shows at
once; remove/repair share, sign out and deletions show the banner;
the player says "Opening…" while the stream opens
- posters are read into a reserved buffer instead of a byte at a time
Sync carried only watch positions, so a second device started empty. The
per-installation history file now also carries per-key registers
(pstr-core::profile): every share with its link and custom password, the
playback, appearance and metadata settings, the TMDB key, hand-picked
matches and per-title track choices. Newer updated_at wins per key, a
removal travels as an empty register, and a first sync stamps at 0 so a
fresh install takes the library the other devices have instead of
overwriting it with defaults. Volume, mute and the device-only settings
(cache budget, Wi-Fi only, background audio, hardware decoding) stay out.
The secrets live only in the end-to-end encrypted Drive file, never in
shares.json. FORMAT_VERSION stays 1; an older build ignores the registers.
Adding a share stored it before opening the link, so a first failure left a
broken entry and every retry said "already configured". add_verified opens
the link first and stores nothing on failure, and only the new share is
crawled afterwards, so another broken share cannot fail the add.
Android drops picture-in-picture: the window sized the video wrongly and
background audio already covers leaving the app.
iOS sizes the Metal drawable on every layout, so the picture no longer
stretches after a rotation or a Split View resize. Settings show a save at
once rather than after the match run, and a failed save reverts and says
why. Both phone clients gain an activity banner naming what is running, and
the add-share, metadata and change-match forms show progress and errors in
place.
The iOS client is now a screen-for-screen port of the Android app over the
same pstr-android UniFFI surface, with no Rust changes: Library, title page,
History, Shares (public links and Drive folders), Downloads and Settings,
with the same strings, undo snackbars and two-pane layout on wide screens.
- Theme from the engine's palette (Material role names, Inter, the same
type ramp and corners), repainted live from the appearance settings.
- Account sign-in with two-factor code, mailbox password and the Proton
CAPTCHA in a non-persistent WKWebView, the Drive folder browser, and
watch-history sync every five minutes, after sign-in, on player close and
when the app leaves the screen.
- Player over libmpv: resume, progress saved every 5 s, autoplay with the
up-next card, skip and auto-skip from the chapter plan, track, speed,
volume and episode pickers, landscape lock, mini transport, and
lock-screen controls with interruption and route-change handling.
- Offline downloads with the Android record format, free-space floor,
retries, transfer rate and the Wi-Fi-only policy; interrupted transfers
resume at next launch.
- Config, data and download state are excluded from backup, as Android's
allowBackup=false: a restore would bring shares back without their
Keychain secrets and give two devices one sync identity.
Picture-in-picture, the share sheet and background downloads are not
possible the same way on iOS; docs/IOS.md lists why and what replaces them.
Adds XCTest ports of the Android unit tests, a `test` command to
scripts/build-ios.sh, the app icon and its render script, and an iOS
workflow on macos-15 that runs the tests and builds the unsigned .ipa.
A SwiftUI app that drives the same UniFFI engine as Android: Rust owns the
Proton sessions, SQLite and every decrypted byte, and Swift asks it questions
off the main thread. Playback goes through MPVKit's libmpv, with the pstr://
stream protocol ported from the Android JNI half, and secrets live in the
Keychain.
scripts/build-ios.sh builds the static library for aarch64-apple-ios, writes
the Swift bindings (module PstrBridge), generates the Xcode project with
XcodeGen and packages an unsigned .ipa for SideStore or AltStore, which
re-sign it with the viewer's own Apple ID. The generated project, Info.plist
and build output are ignored.
nvrl