• Weld 0.4.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:29:31 +01:00 | 0 commits to main since this release

    • The editor opens on a MAIN page with Recovered, the band plot, Mode,
      Response, Output and the time offset. ADVANCED in the header adds the
      phase plot, Sections, Low, High and Gate. Sound and saved settings do not
      change.
    Downloads
  • Crucible 0.4.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:29:21 +01:00 | 0 commits to main since this release

    • A slice is named by a note only when at least three in five pitch reads over
      its body agree on it. Growls, slides and noise are saved without a note
      instead of with a wrong one.
    • Add the song Key: slice names use its spelling, such as Ab instead of G#.
      Without a key, names use sharps as before.
    Downloads
  • Forge 0.2.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:29:13 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Forge follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • All modules share the pitch source, Key lock and Follow bends.
    • When detection is unsure, each module acts as its standalone plugin: Lathe
      passes the audio, Temper keeps its tuning, Knurl fades its texture out.
    • Each module page opens on its MAIN controls. ADVANCED in the header shows
      every control on all pages.
    Downloads
  • Ballast 0.2.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:29:04 +01:00 | 0 commits to main since this release

    • Parts from defaults to Grid, on quarter notes. Switch-ups land on the
      grid, and the grid needs no note detection. Saved projects keep their choice.
    • In Notes mode, detection holds its notes: a new pitch must hold for 40 ms to
      start a new part, and a note ends after 20 ms of silence. Growls and wobbles
      no longer split into many parts.
    Downloads
  • Braze 0.2.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:56 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Braze follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, Braze keeps the detune of the last sure note, and
      the readout shows ?.
    • The editor opens on a MAIN page. ADVANCED in the header adds Phase, Gate
      and Snap.
    Downloads
  • Planish 0.2.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:46 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Planish follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, the band edges hold on the last sure note, and the
      readout shows ?. On a new note the edges slide over 6 ms instead of
      jumping.
    • The editor opens on a MAIN page. ADVANCED in the header adds the band
      gains, Smooth, Gate and Snap.
    Downloads
  • Knurl 0.3.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:38 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Knurl follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, Knurl fades its texture out, and the readout shows
      ?.
    • The editor opens on a MAIN page. ADVANCED in the header adds Edge, the
      Grit burst's Tone, Position and Length, and Gate.
    • The engine is now a module that also runs inside Forge. The sound is
      unchanged; the latency is one sample longer.
    Downloads
  • Temper 0.3.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:30 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Temper follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, Temper keeps the tuning of the last sure note, and
      the readout shows ?.
    • The editor opens on a MAIN page. ADVANCED in the header adds Push at,
      Floor, Bright, Normalize and Gate.
    Downloads
  • Lathe 0.3.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:22 +01:00 | 0 commits to main since this release

    • Add NOTE as a pitch source: Lathe follows a note you set, and the audio
      only starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, Lathe passes the audio unchanged instead of cutting
      a guessed note's harmonics, and the readout shows ?.
    • The harmonic bars show where harmonics 1, 2, 4, 8, 16 and 32 sit in Hz.
    • The editor opens on a MAIN page. ADVANCED in the header adds Harmonics,
      Smooth, Gate and Snap.
    Downloads
  • Anvil 0.4.0
    Check and Windows preview / check (anvil) (push) Successful in 2m37s
    Check and Windows preview / check (ballast) (push) Successful in 1m49s
    Check and Windows preview / check (braze) (push) Successful in 1m48s
    Check and Windows preview / check (crucible) (push) Successful in 2m8s
    Check and Windows preview / check (forge) (push) Successful in 2m9s
    Check and Windows preview / check (knurl) (push) Successful in 1m53s
    Check and Windows preview / check (lathe) (push) Successful in 1m58s
    Check and Windows preview / check (patina) (push) Successful in 3m34s
    Check and Windows preview / check (planish) (push) Successful in 1m59s
    Check and Windows preview / check (quench) (push) Successful in 1m51s
    Check and Windows preview / check (rivet) (push) Successful in 1m50s
    Check and Windows preview / check (temper) (push) Successful in 1m58s
    Check and Windows preview / check (weld) (push) Successful in 3m16s
    Check and Windows preview / previews (push) Successful in 2m17s
    Check and Windows preview / windows (push) Successful in 3m14s
    Independent plugin release / publish (push) Successful in 10s
    Independent plugin release / plan (push) Successful in 8s
    Independent plugin release / build (push) Successful in 3m50s
    Stable

    nvrl released this 2026-11-06 22:28:14 +01:00 | 0 commits to main since this release

    • Add Mode: Replace swaps the sub as before; Enhance keeps the
      original sub and adds the sine under it.
    • Add NOTE as a pitch source: Anvil plays a note you set, and the audio only
      starts and stops it. Add Key lock and Follow bends for AUDIO detection.
    • Detection holds its notes: a new note needs a steady pitch for 40 ms, octave
      jumps need 80 ms down and 200 ms up. Growls, wobbles and formant basses no
      longer flicker between notes. Follow bends brings back the old fast behaviour.
    • When detection is unsure, Anvil plays the original sub (Enhance: adds nothing)
      instead of a guessed note, and the NOTE readout shows ?.
    • The editor opens on a MAIN page with Mode, Split, Sub level, Octave, Ghost,
      Keep and Output. ADVANCED in the header shows every control and Kick lock.
    • Projects from 0.3 load with Replace mode, AUDIO detection, and Key lock off.
    Downloads