0 Fork 0

mirror of https://github.com/narrrl/proton-drive-linux.git synced 2026-11-03 16:41:26 +01:00

Files

T

nvrl 84c9ade8e3 fix(fuse): settle provisional sizes before reads and write opens

A file listed by the cheap enumeration reports its ciphertext size until
the size upgrade lands. Since B84 a read on that size fails with EIO, and
a write open started its handle at it. Reads and write opens now fetch
the real size first. A folder past the size-upgrade cap is queued instead
of dropped, so a large copy no longer leaves most folders provisional
(B100).

2026-09-29 07:37:41 +02:00

236 KiB

Raw Blame History

Bugs & side findings

Running tracker for bugs and loose ends spotted while working on something else — so they don't get lost when the session that found them ends.

Conventions:

Open / Fixed (unverified) / Fixed / Won't fix
"Fixed (unverified)" means the code change is in but nobody has driven the real flow against it yet. It stays that way until someone does.
Record how it was found, not just what it is. The repro is the expensive part.

B100 — A freshly copied file reads as `EIO` or 53 bytes too big

Status: Fixed (unverified). No daemon carrying the change has read a file with a provisional size yet. Found: 2026-09-29, checking a 222-file copy into Documents/pi-backup on 2.7.0. find -printf %s showed 10 small files 52 to 59 bytes bigger than their originals. cat of one of them failed with Input/output error, and the journal had the revision's block table disagrees with the node size ... fsize=221 reader_size=169 followed by repair download did not match the node size. The node's DB row and claimed_size were correct (169). A few minutes later the same files reported the right size and matched the originals byte for byte.

Where: crates/pdfs-fuse/src/filesystem.rs (read, serve_open), crates/pdfs-fuse/src/lib.rs (Core::upgrade_sizes, Core::run_size_upgrade).

Cause. Three things together.

A listing built from the cheap enumeration (B12) has no claimed_size, so a file reports its ciphertext size until the size upgrade lands. The upgrade's own documentation said reads were unaffected because the revision reader carries its own size.
B84 made that untrue. read_block now treats a revision that disagrees with the size it was given as damage: it repairs from the whole-file download, and when that does not match either, it fails the read. With a provisional size the two never match, so every read failed.
getattr normally settles the size before answering (B14), which kept this rare. But only MAX_SIZE_UPGRADES (8) folders may upgrade at once, and past that cap upgrade_sizes returned nothing. The stat was answered with the ciphertext size at once, and nothing retried the folder until the next stat. A recursive walk over many fresh folders goes past the cap.

A write open had the same fault: its handle started at the provisional size, so the file would gain the encryption overhead and reading the base would fail.

Fix. read and a write open settle a provisional size before using it (Core::resolve_provisional_size, one node fetch, on the worker that already goes to the network). A folder past the cap is now queued instead of dropped. When a running upgrade ends, its thread takes over the oldest queued folder, so at most 8 threads still run. Regression tests: a_folder_past_the_cap_is_queued_not_dropped, a_finished_batch_hands_its_thread_the_oldest_queued_one. The read and open paths need a live mount and have no unit test.

B99 — Conflict copies in synced folders are logged again on every start and shown as "Resolved"

Status: Fixed (unverified). No daemon carrying the change has been restarted against the affected copies yet. Found: 2026-09-27. The Activity page listed the same six conflict copies every day, e.g. Conflict [EMBER] Oshi no Ko S2 - 12 (sync-conflict 1786815864).mkv with Differs from … · 24 times since Sep 20, 13:13 · Resolved. find showed all six copies still on disk, in ~/Videos and ~/Documents. Both are on-demand sync folders. pdfs conflicts answered No conflicts.. The journal showed the daemon mounting at 17:29:33, and the entries were stamped 17:30. That is the sweep's 30-second warmup.

Where: crates/pdfs-fuse/src/sweep.rs (flag_conflict, sweep_conflicts_once), crates/pdfs-fuse/src/conflicts.rs (list_conflicts), crates/pdfs-fuse/src/control.rs (ResolveConflict).

Cause. There were two faults.

The sweep kept its "already flagged" set only in memory. Every daemon start forgot it, so the first pass logged every open conflict again.
The sweep flags copies anywhere in the account's own tree. list_conflicts only reported copies below My Files, and resolving only accepted paths under the primary mount. A copy in a synced folder was logged but never listed, so the GUI read it as resolved. It also could not be resolved from the GUI or the CLI.

Fix. Core::conflict_path names a copy by its mountpoint-relative path under My Files, or by its absolute local path inside a synced folder. It reuses the roots that search already resolves hits through. The listing uses it, and the sweep flags only copies it can name. So the feed never holds a conflict the listing cannot answer for. ResolveConflict routes an absolute path to the on-demand mount that serves it. For a copy in a mirror folder, it says to edit the local file instead. Before logging, flag_conflict checks the activity log (Db::activity_has), so a restart does not log the same copy again. The copy's name carries its own timestamp, so the name identifies the copy. No schema change. Regression test: activity_has_finds_only_matching_kind_and_target.

B98 — A superseded upload spins its drain thread forever and shows as "Uploading" at 0 bytes

Status: Fixed (unverified) — the daemon carrying the change has not been driven against a superseded upload yet. Found: 2026-09-23. The Sync page showed Unconfirmed 654050.crdownload — 0 bytes of 23.8 MiB for hours after Brave had finished and renamed the download. pdfs transfers listed the same entry, pdfs diagnostics showed every worker idle, and /proc/<pid>/task showed pdfs-drain-1 in state R at 100% CPU, holding a deleted staging blob open.

Where: crates/pdfs-fuse/src/transfers.rs (CountingReader::read).

Cause. A write that lands while a revision is on the wire cancels that upload through the flag CountingReader checks before every read. The reader reported the cancel as ErrorKind::Interrupted. Every read loop treats that kind as "try again", including the SDK's read_full_block, and the flag never clears, so the loop never ended. The TransferGuard was never dropped, so the transfer stayed in the registry, and the drain thread was lost until the daemon restarted. A browser download is the natural trigger: the .crdownload file keeps growing, so each new write supersedes the upload of the previous one.

Fix. The cancel is reported as ErrorKind::Other, which the SDK turns into an error. drain_revision already recognises a cancelled upload and returns without counting a failure. Regression test: a_cancelled_upload_fails_its_read_instead_of_asking_for_a_retry.

B97 — Photo refreshes stack up on the control socket, and shutdown turns the resolve pass into a burst of "undecryptable photo" warnings

Status: Fixed (unverified) — the daemon carrying the change has not been driven against a real library yet. Found: 2026-09-19, while reading the journal for issues that were still open. pdfs diagnostics had reported a Refresh running for 23 minutes with in_flight at 5, and every mount that ended in a systemctl --user restart was followed by ~95 skipping undecryptable photo warnings.

Where: crates/pdfs-fuse/src/control.rs (Refresh handler), crates/pdfs-fuse/src/photos.rs (refresh_timeline), crates/pdfs-fuse/src/diagnostics.rs (request_kind).

Cause. Two unrelated faults with one symptom each.

The stall: every Refresh arm is individually cheap — a directory refresh resolves and invalidates one listing, a photos refresh clears one state key and spawns the real work — but nothing stopped several of them running at once. A front end that asks again while the first refresh is still going gets a second handler that does the whole thing again: invalidate_photos, optionally photos_mark_all_unresolved over the entire timeline, invalidate_albums. Each of those takes the database lock the already-running refresh holds for minutes at a time, so the duplicates queue behind it, hold a control handler slot, and appear as a wedged Refresh. The report could not even say which view was wedged: request_kind reads only serde's external tag, so all three scopes logged as a bare Refresh.

The warning burst: refresh_timeline resolves photo metadata in chunks and keeps going through teardown. The runtime is cancelled under it, every decrypt task in flight fails with "task was cancelled", and the SDK logs one skipping undecryptable photo per node. Nothing was corrupt — the library was fine on the next mount, because photos_replace preserves prior metadata and leaves resolved_at null so the next refresh re-reads exactly those photos.

What changed. A refresh scope is now single-flight: RefreshGuard holds the scope key (dir:<path>, trash, photos, photos:full) for as long as one is being served, and a second request for that same key is answered refreshing immediately instead of repeating the work. A non-full photos refresh is additionally skipped while timeline_refreshing() is true, since that work outlives the request that started it. request_kind now names the scope, so the diagnostics report says Refresh(Photos) rather than Refresh. And the resolve loop stops asking for chunks once Shutdown::is_stopping(), logging stopped and the resolved-versus-wanted counts on the way out.

B96 — Staged bytes that name no node are never retired, and are re-announced on every boot

Status: Fixed (unverified). Found: 2026-09-19, in the journal: the same "staged bytes belong to no queued upload" warning appeared once per blob per mount, forever. The staging directory held 138 blobs / 575 MiB, of which 95 (~445 MiB) referenced no node at all; the oldest were two months old.

Where: crates/pdfs-fuse/src/lib.rs (reconcile_staging).

Cause. Startup reconciliation is deliberately conservative: staged bytes are the only copy of an un-uploaded write, so a blob it cannot match to a queued op is kept rather than deleted. But "kept" had no end. A blob whose node is gone from the database can never be matched by any future boot, so the warning was both permanent and per-blob, and the bytes accumulated with no ceiling.

What changed. A blob that names no node and whose mtime is older than STAGING_ORPHAN_RETAIN (30 days) is retired, with its size logged. A month is long enough that a write stranded by a bug can still be recovered by hand. Younger orphans are still kept, but they are now counted and reported as one aggregated warning with one example path, not one line each.

B95 — A real `index.tmp` is treated as a browser tempfile and parked forever

Status: Fixed (unverified). Found: 2026-09-19, while working out why 43 uploads were parked. Most of them were index.tmp and preview.tmp files from a Google Photos Takeout import — ordinary files whose final name simply ends in .tmp.

Where: crates/pdfs-core/src/syncignore.rs (TRANSIENT_SUFFIXES).

Cause. One suffix list served two mechanisms with very different consequences. On a mirror mount, calling a name transient means "do not reconcile it yet", which is reversible and costs nothing if wrong. On an on-demand mount it means "park the create until the writer renames it" (B70) — and a file whose real, final name ends in .tmp is never renamed, so the park stands forever and the bytes never go up.

What changed. .tmp and .temp are out of TRANSIENT_SUFFIXES. The remaining suffixes (.crdownload, .part, .partial, .download, .swp, .swx) belong to writers that always rename. A .tmp write from a program that does rename is still handled — by the rename itself, which supersedes the create.

B94 — A parked create has no exit but the rename, so an abandoned one is stuck forever

Status: Fixed (unverified). Found: 2026-09-19, while reading the journal: 43 rows in pending_op carried the PARK_UNTIL sentinel, some for weeks. pdfs status reported them as parked uploads that never moved.

Where: crates/pdfs-core/src/db/ops.rs (parked_create_ops, PARK_EXPIRY_MS), crates/pdfs-fuse/src/drain.rs (sweep_parked_creates).

Cause. B70 parks a transient create by writing PARK_UNTIL into next_attempt_at, and the only thing that clears it is the transient-to-final rename (Db::set_create_hold). If the rename never happens — the writer crashed, the user deleted the temp file, or the name was never transient in the first place (B95) — the row is invisible to claim_next_due_op and stays in the queue permanently, holding its staged blob.

What changed. The primary drain worker sweeps parked creates when the queue is idle, which is exactly when a park that has outlived its writer matters. A parked create whose node is gone from the database has its queued ops discarded. One whose node still exists, that is older than PARK_EXPIRY_MS (1 hour) and that nobody has open, is un-parked rather than dropped — drain invariant 1 says staged bytes are only dropped once their op has landed, so the sweep lets the bytes through under the transient name instead of destroying them. An open node is left parked whatever its age: it is still being written.

B93 — A photo whose node would not resolve lost its name, and with it its tab and its group

Status: Fixed (unverified) — found and fixed while making the timeline refresh incremental (B92); no library with an undecryptable photo in it has been driven against the fix. Found: 2026-09-19, by reading photos_replace before making a refresh skip photos it has already resolved. Skipping one means writing a TimelineRow that carries only the uid and the capture time, which is exactly the row a failed resolve already produced.

Where: crates/pdfs-core/src/db/photos.rs (Learned, photos_replace).

Cause. photos_replace keeps what a refresh could not learn — ratio, thumbnail verdict, media type, favourite flag, content hash, photo relation all survive a None. The name did not: Learned never held it, the SELECT never read it, and the INSERT bound row.name straight through. So a photo the SDK could not decrypt (it logs and skips the node) had its stored name overwritten with NULL on every refresh. That is not a cosmetic loss — both the tab split and the grouping are derived from the name. PhotoKind::classify is extension-first, so a nameless RAW file classifies as a still photo and leaves the Raw tab; name_stem returns None, so the RAW and the JPEG of one shot stop being one shot; and redate skips nameless photos outright.

What changed. Learned carries the name like everything else, and the kind and the group stem are computed from the carried name rather than the incoming row. A row that was resolved is now authoritative instead: its fields are taken as they are, so a photo unlinked from its main on another device finally loses its main_uid — a carry could never express "the server says none".

B92 — Refreshing the gallery reported "Resource temporarily unavailable"

Status: Fixed (unverified) — the daemon carrying the change has not been driven against a real library yet. Found: 2026-09-19, while checking why a 12,445-photo timeline still showed the pre-grouping layout after pressing Refresh. pdfs refresh photos failed after about two minutes with:

Caused by:
    0: io: Resource temporarily unavailable (os error 11)
    1: Resource temporarily unavailable (os error 11)

Where: crates/pdfs-fuse/src/control.rs (RefreshScope::Photos), crates/pdfs-core/src/control.rs (READ_TIMEOUT, the new PhotosRefreshStatus), crates/pdfs-gui/src/app/main.rs (refresh_then), crates/pdfs-cli/src/main.rs (cmd_refresh).

Cause. Refresh { Photos } awaited refresh_timeline() before replying, on the reasoning that somebody who presses Refresh wants the truth rather than a stale page. But the refresh resolves every photo's node in batches of TIMELINE_ENRICH_CHUNK (200), so a 12,445-photo library is 63 server round-trips — minutes of work. The client's read bound is READ_TIMEOUT = 120 s, so the socket timed out with EAGAIN while the refresh was running perfectly. In the GUI the timeout was invisible: refresh_then ignores the reply and loads the page anyway, which re-read the old timeline and made Refresh look like a dead button.

What changed. The daemon starts the refresh (spawn_timeline_refresh, which already dedupes) and replies refreshing at once. Request::PhotosRefreshStatus reports whether one is running; the gallery polls it every 2 s and reloads the page when it clears, and pdfs refresh photos polls in the same way so the command still means "the timeline is up to date when I return". refresh_timeline now logs photos, chunks and elapsed_ms.

What changed, second pass (2026-09-19). The refresh is incremental. photos.resolved_at (schema v31) records that a photo's node was read, and refresh_timeline resolves only the photos that have no such mark — the ones it has never read, and the ones a remote event marked stale. A library that has already been read costs one enumerate_timeline and no enumerate_nodes call at all.

The favourite question resolved by moving it off the refresh and onto the event feed: classify_photo_events turns a NodeUpdated into photos_mark_unresolved(uid) instead of a blanket "re-read everything", so a favourite toggled on a phone costs one node read rather than 63. A local toggle is claimed as our own echo (note_self_change), because the feed replays it and a NodeUpdated carries nothing that says what changed. ContinuityLost / ScopeAccessLost and pdfs refresh photos --full drop every mark, which is the one way back to a whole-library read. TIMELINE_ENRICH_CHUNK is 150, matching the SDK's own MAX_BATCH_COUNT — a chunk of 200 was split there into a full request and a 50-uid tail.

Still open. invalidate_albums() drives the same pattern per album (crates/pdfs-fuse/src/albums.rs:96 and :191). It is bounded by album size rather than library size, so it is nowhere near as expensive, but the technique that fixed this would apply there too.

B91 — The daemon hung overnight, and nothing could say what it was waiting on

Status: Open — the hang itself is undiagnosed. What is fixed (unverified) is the undiagnosability: the daemon now reports what it is doing, warns when it stops making progress, and is restarted by systemd when it stops answering. Found: 2026-09-18, from a user report — the mount stopped responding and only came back after systemctl --user restart. Where: crates/pdfs-fuse/src/{workers.rs,diagnostics.rs,supervisor.rs,systemd.rs,mount.rs}, packaging/proton-drive.service.

Symptom. The mount stops answering. The process is alive and is not spinning; there is no panic, no error, and no log line after the moment it stopped. The accounting for the hung run:

Consumed 43min 39.045s CPU time over 20h 8min 15.733s wall clock time,
5.2G memory peak, 65.7M memory swap peak

It went silent at 17:10 and stayed that way until the manual stop at 13:18:54 the next day. A restart picked everything back up, which rules out corrupt local state.

What made it undiagnosable. Nothing in the daemon could be asked what it was doing:

the worker pool published no state at all — not which threads were busy, not with what, not for how long, not how deep the queues were;
control requests were not tracked, so a handler that never returned looked exactly like a handler that was never asked for;
there was no watchdog, so a daemon that stopped answering stayed "active (running)" for twenty hours;
resident size was never sampled, so the 5.2 G peak was only visible in systemd's post-mortem.

Related, and a real bug on its own. At 2026-09-18 09:58:35 a meta worker panicked during shutdown:

thread 'pdfs-fuse-meta-0' (3044) panicked at ...:
A Tokio 1.x context was found, but it is being shutdown.

The pool was flagged closed at teardown but never joined, so the process could drop the tokio runtime while a worker was still inside a job. catch_unwind caught it, which is why it was only ever a log line — but it is teardown ordering, not an error.

What changed.

Workers publishes per-thread state (busy, job label, age) plus queue depths and per-lane completion counts, all outside the queue lock, and every FUSE handler labels the job it hands over.
Request::Diagnostics / pdfs diagnostics reports that, the in-flight control requests with their ages, the handler count against its limit, resident size and the pending-op count. It is built to answer while the daemon is wedged: atomics and try_lock only, with the one database read on a throwaway thread behind a 500 ms deadline.
A supervisor thread WARNs when a worker has held one job for 120 s, when a control request has run that long, or when a lane has a queue but completed nothing since the last tick; it samples RSS every 5 minutes.
The supervisor answers the systemd watchdog, but only after a real round trip over the control socket — so the ping means "a client can still talk to this daemon" rather than "a thread is still scheduled". WatchdogSec=120 and Restart=always turn the next hang into a restart instead of a morning of downtime, and MemoryHigh=2G/MemoryMax=6G bound the growth.
Teardown joins the worker pool, with a 10 s deadline, before the caller drops the runtime.

Still open. None of this says why it hung. The candidates the evidence does not yet separate: the 5.2 G working set (a leak, or a legitimately huge listing retained), a lock held across an await somewhere in the control plane, and the ~150 rt.block_on sites on the control path that have no op-level deadline of their own — each individual HTTP call is bounded by the SDK's 30 s API / 300 s storage timeouts, but a sequence of them is not. The next occurrence should be a one-line answer from pdfs diagnostics or from the stall WARN.

B90 — The local-file indexer walks into foreign FUSE mounts, and a dead one makes the daemon unkillable

Status: Fixed (unverified) — the walker no longer stats a nested mountpoint. The stuck-daemon half cannot be fixed in userspace at all; see "Why there is no second line of defence". Found: 2026-09-16, from a user report of systemctl --user restart failing in a loop. Where: crates/pdfs-core/src/localindex.rs (default_excludes, scan), crates/pdfs-fuse/src/background.rs (scan_local_once).

Symptom. Stopping the service times out, SIGKILL does not help, and every subsequent start fails with another Proton Drive daemon is already using .../cache.db:

systemd[2196]: proton-drive.service: State 'final-sigterm' timed out. Killing.
systemd[2196]: proton-drive.service: Killing process 2221 (pdfs) with signal SIGKILL.
systemd[2196]: proton-drive.service: Processes still around after final SIGKILL. Entering failed mode.
systemd[2196]: proton-drive.service: Unit process 2221 (pdfs) remains running after unit stopped.
pdfs[73921]: ERROR mount failed; retrying in 5s error="open cache db: another Proton Drive daemon
             is already using /home/narl/.local/state/proton-drive-linux/cache.db"

Diagnosis. The surviving process is a zombie that still has a live thread:

$ cat /proc/2221/status | grep -E 'State|Threads'
State:  Z (zombie)
Threads: 2
$ cat /proc/2221/task/73231/comm; cat /proc/2221/task/73231/stack
pdfs-localindex
request_wait_answer

pdfs-localindex is parked in a FUSE request nobody will answer, in uninterruptible D state, so it ignores SIGKILL. The thread group leader exits, the thread does not, the process cannot be reaped — and it keeps the cache.db lock, which is what turns one stuck scan into a permanent restart loop. The same dead connection also blocked an unrelated duf in fuse_statfs (/sys/fs/fuse/connections/69/waiting was 2).

Cause. scan_local_once walks $HOME, and default_excludes only excluded the Drive mountpoint plus our own state and cache dirs. The reporter's home also held ~/remote/narl.io (sshfs) and ~/remote/gdrive (rclone) — third-party FUSE mounts the walk descends into.

scan does set same_file_system(true), which looks like it should already cover this. It does not: in ignore 0.4.33 the check is is_same_file_system → device_num(path) → path.metadata() (walk.rs:2164), i.e. a stat of the mountpoint, performed in run_one after the directory has been queued. To discover that a mount is foreign, the walker first has to touch it. Against a network FUSE mount whose server is gone, that stat never returns.

Fix. localindex::nested_mount_points reads /proc/self/mounts and returns every mountpoint strictly below the scan root; scan_local_once appends those to the excludes. filter_entry runs before the device stat (walk.rs:1926, before send), so a path-only rejection keeps the walker from ever touching the mount. Mountpoint fields are octal-unescaped, because a \040 left in place would silently fail to match and put the mount back in the walk. Re-read per scan, not cached at startup: a mount that appeared since the daemon started is the likeliest to be a half-alive network filesystem.

This changes nothing about what gets indexed. A nested mount is a different device, so same_file_system(true) was always going to skip it — the exclude only removes the stat that had to happen first.

Why there is no second line of defence. Once a thread is in uninterruptible FUSE wait, no userspace change rescues it: not a join timeout, not std::process::exit, not SIGKILL. The kernel will not reap the task until the syscall returns, which needs someone to answer the request or abort the connection (echo 1 > /sys/fs/fuse/connections/<id>/abort, root-only). Avoiding entry is the entire fix. That makes any new code path that stats a user-supplied or mount-crossing path from a daemon thread a repeat of this bug — mirror-folder scanning is the obvious next candidate.

Recovery for an already-wedged daemon. As root, abort the connection with waiters (grep . /sys/fs/fuse/connections/*/waiting finds it), which releases the thread, lets the zombie be reaped and frees the cache.db lock. A reboot also clears it.

B89 — The recorded SDK dependency is three minor versions out of date in the working memory

Status: Open — documentation only, but it misdirects every reader of the SDK code. Found: 2026-08-17, while checking B85's evidence against the reader implementation. Where: proton-dev/CLAUDE.md (the container-level file, not in this repo).

CLAUDE.md states that proton-drive-linux/Cargo.toml declares proton-sdk = "0.1" / proton-drive-rs = "0.1" and that Cargo.lock pins 0.1.11 from the registry, against a local proton-sdk-rs/ at 0.1.12. Neither half is true any more: the lock pins 0.6.0, bumped by 1.7.1 (see its changelog entry, "Workspace deps bumped to proton-sdk / proton-drive-rs 0.6.0") and never reflected in the working memory.

Why it matters beyond tidiness. The whole point of that section is to tell you which source you are reasoning about when you read SDK code. Verifying B85 meant establishing what read_at does in the version the client actually builds against; following CLAUDE.md sends you to proton-drive-rs-0.1.11 in the registry cache, and to a local checkout described as one patch ahead of it when it is in fact five minor versions behind. The conclusion happened to be the same in every version — but that was luck, and the next question of this shape may not be.

Fix: correct the versions, and prefer describing where to look (grep -A2 'name = "proton-drive-rs"' Cargo.lock) over restating a number that goes stale on every dependency bump.

B88 — `pdfs pin`, `rename`, `move`, `delete` and sharing still cannot name a path under a secondary mount

Status: Open — B86's fix covers ls and refresh only. Found: 2026-08-17, while fixing B86. Where: crates/pdfs-fuse/src/control.rs, every handler still calling rel_to_mount.

B86's second half added Core::rooted_at and control.rs::route_to_mount, which resolve a path against whichever mount the daemon owns it under and answer the request in that mount's inode space. Only ListDir and RefreshScope::Dir were routed through it, because those two were what the B86 repro needed: an escape hatch for a folder serving a stale listing.

Every other path-addressed control request — Pin, Unpin, Rename, Move, Delete, CreateFolder, OpenFile, the sharing and public-link requests, ListRevisions — still uses the primary-only rel_to_mount, so an absolute path inside a secondary on-demand mount is rejected with "is not under the mountpoint". The user can now see such a folder's contents and cannot act on them by path.

Why it was left. Routing a mutating request is not the same change as routing a read. Each of those handlers resolves an inode, checks access, performs a remote operation and then invalidates local state, and several of them invalidate self.state() — the primary — explicitly. Routing them means auditing each for which mount's state it is really talking about, which is a larger and riskier change than the one B86 needed. Doing it half-way would be worse than not doing it.

Required fix/test: move the remaining handlers onto route_to_mount, auditing each for per-mount state assumptions as it goes; the for_each_state/uid-keyed helpers are the pattern for the ones that touch more than their own inode space. Test: a pdfs pin and a pdfs rename by absolute path inside a secondary on-demand mount, plus a path under no mount still erroring.

B87 — A revision's block geometry is learned a read too late

Status: Open — a bounded, self-correcting cost, accepted deliberately in 1.8.2. Found: 2026-08-17, while fixing B85. This is the residue that fix leaves. Where: crates/pdfs-fuse/src/reads.rs (Core::block_geometry, read_block).

B85's fix takes block boundaries from the revision instead of assuming 4 MiB. The geometry comes from RevisionReader::block_sizes(), and a reader is expensive to open — link details, ancestor keys, an S2K node-key unlock and the block table, which is exactly the per-read work the block cache exists to avoid (B12). So the geometry is learned as a side effect of the first read, which has to open a reader anyway, and written to a <key>.geom sidecar for later reads.

The first read of a file therefore still plans on BlockGeometry::uniform. On a file whose blocks are not 4 MiB that plan is wrong, and it costs exactly one straddling fetch: the reader fetches two of the revision's blocks to answer for one client block, and the block written to the cache is at an offset the next read — now planning correctly — will not ask for, so it ages out unused. Every read after the first is right.

Why it is not being fixed now. The alternatives are all worse than the cost. Resolving a reader before planning reintroduces B12's per-read key derivation on every file. Persisting the geometry at upload only covers files this client wrote, which are the ones the fallback is already correct for. Fetching the block table alone still costs the node-key unlock.

Worth doing if: non-4-MiB revisions turn out to be common on real accounts rather than a handful of files on one, or if the block table becomes reachable without unlocking the node key. Measure before deciding — one wasted fetch per file per revision is not obviously worth paying anything to remove.

B86 — An on-demand mount serves a listing that predates the mirror engine's own uploads

Status: Fixed in code (2026-08-17); live re-run of the repro pending. Found: 2026-08-16, while trying to drive B42's remote-delete path from one machine. Where: crates/pdfs-fuse/src/sync.rs upload path (no listing invalidation) meets the cached children snapshot the on-demand mount enumerates from.

Repro. With folder 6 (~/pdfs-live-mirror) in mirror mode: create c1.txt and c2.txt, pdfs sync now 6 — the activity feed reports c1.txt new file, c2.txt new file and sync_entry gains rows carrying real remote_uids. Switch the folder to on-demand and list it:

$ ls ~/pdfs-live-mirror
b25.txt
b40.bin          # c1.txt, c2.txt and the conflict copy are missing

ls ~/pdfs-live-mirror/c1.txt returns ENOENT. Restarting the daemon does not help — the stale children snapshot is in the database, not in memory. Switching the folder back to mirror proves the files were on the server the whole time: the pass downloads all five, and b40.bin comes back md5-identical.

Effect. No data loss — the mirror side is correct and the files are intact remotely — but a user who switches a synced folder to on-demand sees an incomplete folder, and anything that walks it (a backup, an indexer, rm -r) sees the same incomplete folder. It also blocks B42's live verification, because pdfs rm cannot name a file the mount will not admit exists.

Second, smaller gap in the same repro: pdfs refresh and pdfs ls reject any path that is not under the primary mountpoint (Error: … is not under the mountpoint), so a secondary on-demand mount has no manual escape hatch either.

Required fix/test: invalidate (or update) the parent's cached children when the sync engine creates a remote node, the same way the FUSE write path does; and let refresh/ls resolve a path under any mount the daemon owns, not just the primary. Test: the repro above, asserting the new files appear immediately after the mode switch.

Fix (2026-08-17)

Two halves, matching the two halves of the report.

The stale listing. Core::invalidate_children_of (pdfs-fuse/src/lib.rs) drops a folder's cached children by uid. The existing invalidate_parent_listing could not serve here for two reasons: it names the folder by inode, and a mirror folder has no inode space at all at the moment the engine writes to it; and the listing that outlived the pass was not a hot-cache map but the listed flag on the folder's DB row — which is why restarting the daemon did not help. The new helper clears that flag unconditionally and then invalidates whichever mounts happen to hold the folder resident. The sync engine calls it after every remote mutation it makes: folder creation and file upload (apply_one, upload_new), and the three remote-trash sites, whose parent uid comes from the pass's folder-uid map or the baseline (parent_uid_of).

The missing escape hatch. StateRegistry now carries each mount's size_upgrades map as well as its state, notifier and liveness flag — that set is exactly the per-mount half of a Core (everything fork_state replaces) — and StateRegistry::covering_parts returns it for the mount that most specifically covers a path. Core::rooted_at swaps those fields into a clone of the Core, giving a view rooted at the owning mount plus the path relative to its root. pdfs ls and pdfs refresh route through it (control.rs::route_to_mount), so a secondary on-demand mount can be named at last; a path under nothing this daemon has mounted still gets the familiar "is not under the mountpoint" error. The other path-addressed control requests deliberately still use the primary-only rel_to_mount — routing the mutating ones is a larger change and was not what blocked the repro.

Test: covering_parts_route_a_path_to_the_mount_that_owns_it covers the routing rule (nested mount wins, suffix relative to it, its own inode space and upgrade batches, a path under no mount routes nowhere). The listing-invalidation half is the live repro, which is what is still pending.

B84 — A block read that comes back short truncates the file, silently

Status: Fixed and live-verified 2026-08-16. Data correctness — an application reading a large file through the mount could get a truncated copy that reported success. The truncation is now impossible: a disagreement is repaired from the whole-file download, or the read fails EIO. Re-verified on 1.8.1 after the release build: 118454731_p0.png, 121677947_p0.png, 123349685_p0.png and 128451683_p0.png each delivered exactly their stat size (19471492, 11811519, 22055175, 11393178 bytes) with no Invalid argument reply in the journal. Found: 2026-08-16, chasing what looked like log noise. GNOME's file indexer (localsearch-3) was filling the journal with libpng error: Read Error, libpng error: IDAT: CRC error and File too small to be a PNG on files under ~/ProtonDrive/Pictures, interleaved with 49 ERROR fuser::reply: Failed to send FUSE reply: Invalid argument (os error 22) from the daemon in one afternoon. The indexer was right and we were wrong.

Where: Core::read_block (crates/pdfs-fuse/src/reads.rs:566), the assembly loop in Core::read_range_remote (reads.rs:759-769); upstream, RevisionReader::read_at / splice_block and rank_block_sizes (proton-drive-rs 0.6.0, revision.rs, transport.rs:256).

Repro. Deterministic per file, no account state needed beyond the files themselves:

stat -c %s FILE            # what the mount reports
cat FILE | wc -c           # what the mount can actually deliver

file	`nodes.size` / `stat`	bytes readable
`Pictures/old/92433593_p0.png`	4317497	4194304 (tail block yields 0)
`Pictures/old/79779657_p0.png`	11574982	10567052
`Pictures/old/2022-07-09_04-53.png`	6388959	4389310

pdfs pin on the third file, then re-read: 6388959 bytes, a fully valid PNG — every chunk CRC passes, IEND is reached, the IDAT stream inflates to 44.8 MB. So the remote data is intact, nodes.size is right, and the whole-file (manifest-verified) download path is right. Only the block/range path truncates. Pinning is the workaround.

Root cause. read_block asks the SDK for blen = BLOCK_SIZE.min(fsize - bstart) bytes and never checks how many it got:

let bytes = reader.read_at(bstart, blen).await.map_err(...)?;   // reads.rs:577

RevisionReader::read_at clamps the range to its own file_size — summed from the believed per-block sizes rank_block_sizes resolved — and splice_block clamps again to plaintext.len(). Both are silent. A short block then vanishes in the assembly loop: with block.len() short, e = (end.min(bstart + block.len()) - bstart) collapses, and for an empty block s < e is false, so nothing is appended at all. The FUSE read returns fewer bytes than asked for, the kernel hands userspace a short read, and every tool reads a short read as EOF. The EINVAL reply errors are the same mismatch seen from the other side.

Nothing on this path validates a block against the length the file's own size implies (block_len(fsize, bidx) — which the cache does check, in ContentCache::cached_block, and which is why a short blob on disk is rejected and refetched while a short blob from the network is served).

Not yet known: which rung of rank_block_sizes these revisions land on. The three reader-vs-node deltas fit no constant ratio, so this is per-revision metadata rather than block padding — the terminal block_count <= 1 fallback (vec![4 MiB; block_count]) would explain the file that stops at exactly 4 MiB but not the other two. Needs a live probe printing RevisionReader::block_sizes() against nodes.size for these three uids. That answer decides whether the real fix belongs in this repo or in proton-sdk-rs.

Fix (2026-08-16). Core::read_block no longer trusts the range path blindly.

The disagreement is caught before any bytes are read. If reader.size() != fsize, the revision's block table does not describe this file and no block of it can be trusted — not just the short ones. Sizes that overstate a block shift every block after it and return full-length reads of the wrong bytes, which no length check would ever catch (the SDK's rank_block_sizes documents exactly this failure). So the whole file leaves the range path.
A short block is caught as a second net, compared against block_len(fsize, bidx) — now pub in pdfs-core::cache, because it is the contract the read path shares with the cache rather than a detail of the cache. The assembly loop in read_range_remote re-checks the same thing and fails EIO rather than contributing fewer bytes than the range it covers, which is the line that actually turned a bad block into a truncated file.
A file that fails either check is repaired, not just refused. Core::repair_block pulls the whole revision through download_file_to — the manifest-verified path, which does no boundary arithmetic and is why pinning worked — into a scratch file, checks it against nodes.size, and adopts it as the cached blob via store_file. Every later read of the file is then answered by ContentCache::read_range before the block path is consulted at all. One download per file, not per block: content_repairs holds a lock per file so the concurrent block reads that all discover the same bad table share it. Bounded by REPAIR_MAX (512 MiB) — past that one unlucky read would pull down gigabytes, so it fails EIO and says to pin.

Nothing short is cached or promoted: read_block only reaches store_block and the block_ring insert with bytes that passed. store_block itself deliberately does not check — its fixtures store 4 KiB "blocks" of notional 1 GiB files to keep the budget tests cheap, and the read side (cached_block, has_block) already rejects a wrong-length block as a miss. Validation is the reader's job, at the point of fetch.

getattr needs no change after all: pdfs pin proved nodes.size is the correct one and the reader's belief is the wrong one, so the fix is to stop serving the reader's belief — not to publish it through stat.

Verified live (2026-08-16). Four multi-block PNGs under Pictures/wallpaper/ were read whole through the mount on the running 1.8.1 daemon; every one delivered exactly its stat size (5558846, 1098729, 2015463, 2291122 bytes), and no fuser::reply … Invalid argument appeared. The journal shows the second net firing and the repair path serving each of them:

WARN block came back shorter than the file's size implies bidx=0 blen=4194304 got=4939506 …
INFO served a short block from a repaired whole-file download bidx=0 …

Answered, and not as expected. The open question was which rung of rank_block_sizes these revisions take. The evidence says the reader is not the confused party: reader.size() equals fsize in every case — the gate in step 1 never fires — and the blocks it returns are larger than 4 MiB, not smaller (4939506 for a whole 4.9 MB file; 5239804 and 5670228 as first blocks). This client's fixed 4 MiB block geometry is the thing that is wrong. Filed as B85; the repair path above is what keeps those files readable in the meantime, at the cost of a whole-file download on first read.

B85 — The read path assumes 4 MiB blocks; some revisions do not have them

Status: Fixed in code (2026-08-17) — the geometry now comes from the revision. See "Correction to the diagnosis" below: the premise that this was losing data does not survive reading the SDK, and the fix is a cost fix, not a correctness one. Found: 2026-08-16, while live-verifying B84 (see its journal evidence) Where: crates/pdfs-fuse/src/reads.rs, crates/pdfs-core/src/cache.rs (BLOCK_SIZE, block_len)

Cause: The whole range path is built on one assumption — that a revision is a series of BLOCK_SIZE (4 MiB) blocks with a remainder at the end. block_len(size, idx) encodes it, the on-disk block cache is keyed by that index, and read_block asks the SDK's RevisionReader for [idx * BLOCK_SIZE, block_len).

Some revisions on this account are not laid out that way, and B84's diagnostic caught it in the act. The warning it logs reads "shorter", but the numbers say the opposite:

bidx=0 blen=4194304 got=4939506 fsize=4939506     # one block holding the whole file
bidx=1 blen=745202  got=0       fsize=4939506     # …so there is no block 1
bidx=0 blen=4194304 got=5239804 fsize=11537412    # first block is ~5.0 MiB, not 4
bidx=1 blen=4194304 got=5670228 fsize=11106988    # …and they are not even uniform
bidx=2 blen=4194304 got=5233034 fsize=19932790

reader.size() agrees with fsize in every one of these, so B84's primary gate — the one that catches a block table that does not add up — correctly does not fire. The file is intact and the reader knows its real boundaries; it is this client that is asking for the wrong ones.

Why it is not currently losing data: B84's length check catches every one of these and routes the file through the whole-file manifest-verified download, so reads are correct. The cost is real, though: any file with non-4-MiB blocks is downloaded whole on first read, however few bytes were asked for, and one above REPAIR_MAX (512 MiB) fails EIO and can only be read by pinning it.

Fix direction: take the geometry from the revision instead of assuming it. RevisionReader::block_sizes() already exposes it and B84 already logs it. That means block offsets become a prefix sum over the real sizes rather than idx * BLOCK_SIZE, and — the part that makes this its own change rather than a patch — the on-disk block cache is keyed and length-validated on the 4 MiB assumption too (block_len), so its key scheme has to follow the file's own geometry or the cache has to hold ranges rather than blocks.

Open question: what produced these revisions. Uniform-but-not-4-MiB would suggest another client's chunk size; these are not uniform (5239804, 5670228, 5233034), which looks more like a size recorded per block after some transformation. Worth answering before choosing the fix, since "blocks are whatever the revision says" and "blocks are a different constant" lead to different designs.

Correction to the diagnosis (2026-08-17)

The logged numbers cannot have come from read_at, and the "this client asks for the wrong range" reading is wrong. RevisionReader::read_at(offset, length) does not assume any geometry: it computes end = min(offset + length, file_size), plans over the real block sizes (plan_blocks), and splices each block clamped to [offset, end) (splice_block). Both are present and identical in the version the client actually builds against — Cargo.lock pins proton-drive-rs 0.6.0, not the 0.1.11 the top-level CLAUDE.md still describes — and in 0.1.11 as well. So a read_at(bstart, blen) can return at most blen bytes, and every quoted line has got > blen:

bidx=0 blen=4194304 got=4939506     # got exceeds the length requested
bidx=1 blen=4194304 got=5670228     # …as does this one

The only site in the client that logs this shape (reads.rs, the blen/got/fsize warning) reaches it solely on the bytes.len() != blen branch of a read_at(bstart, blen). Those two facts cannot both hold. Either the numbers were transcribed with blen and got swapped, or they came from a build that is not in the history. This wants re-capturing from the journal before anything is concluded from it — and in particular, the entry's claim that B84's repair path is "currently masking data loss" here is not supported.

What is true, and is what got fixed: the client assumed the geometry. idx * BLOCK_SIZE and block_len(size, idx) encoded "4 MiB blocks with a remainder" in the range planner, the in-memory ring, the in-flight fetch key and the on-disk block cache. When a revision is not shaped that way, nothing breaks — but every client block straddles two server blocks, so the reader fetches and decrypts two to answer for one, and the block written to disk lines up with nothing the next read asks for. That is a real and unbounded cost on exactly the files the entry found, and it defeats the property the block cache was built around.

Fix (2026-08-17)

BlockGeometry (pdfs-core/src/cache.rs) is a prefix sum over a revision's block sizes, with BlockGeometry::uniform(size) reproducing the old constant-block arithmetic exactly. Blocks are now addressed by BlockSpan { idx, start, len } rather than by index, everywhere: the range planner (spans(offset, end)), the in-memory ring, the in-flight-fetch key, and the on-disk block cache. The span is the identity because the index alone stopped naming one byte range — block 1 under the fallback and block 1 under the real geometry are different bytes — so the block sidecar records the block's plaintext start and a re-planned read misses rather than being served the wrong offset. Sidecars written before that field existed read as "wherever the 4 MiB assumption put it", which keeps the existing cache intact for every file this client uploaded.

The geometry itself is learned as a side effect of the first read (which has to open a RevisionReader anyway) and written to a <key>.geom sidecar under the block cache; Core::block_geometry reads it back and falls back to uniform when it is absent. Resolving a reader just to plan would reintroduce the per-read key derivation the block cache exists to avoid (B12), so the first read of a file still plans on the fallback and self-corrects. A recorded table whose sizes do not sum to the node's size is refused outright, and eviction takes the geometry with the blocks it describes.

The open question above is still open, and no longer blocks anything: "blocks are whatever the revision says" is now what the code does, so a different constant is just another table.

Tests: the_uniform_geometry_is_the_old_block_arithmetic, a_non_uniform_geometry_places_blocks_by_prefix_sum (built on the exact sizes from the log above), a_cached_block_is_not_served_to_a_different_geometry, a_recorded_geometry_is_returned_only_for_the_revision_it_describes.

B83 — An access-deferred op retries forever and is reported as an ordinary queued upload

Status: Fixed (partly verified) 2026-08-16 — both halves are in and unit-tested. The reporting half was confirmed against the live 28-op backlog on 1.8.0 (schema migrated to v27, all 28 rows window-stamped, WARN lines per op); the resolution half has not yet been observed draining that backlog. Found: 2026-08-16, running scripts/fuse-acceptance.sh --live on a throwaway CLI-made mount. Four regression cases (B69, B70, B74, B79) failed with TimeoutError: daemon mutation queue did not drain — the suite's wait_for_queue() polls the global status.mount.pending_uploads, which had been sitting at 28 for 30 days on the development machine. pdfs status called them 28 queued uploads holding 18.4 GiB; pdfs transfers showed nothing; failing_ops and parked_uploads were both 0. Where: run_pending_drain / run_authorized_drain (crates/pdfs-fuse/src/drain.rs), require_uid_writable (crates/pdfs-fuse/src/lib.rs), Db::effective_node_access (crates/pdfs-core/src/db/share_access.rs), Db::defer_op_without_attempt (crates/pdfs-core/src/db/ops.rs).

Root cause. effective_node_access returns Ok(None) when the uid has no row in nodes, and require_uid_access maps that to EACCES — "I have never heard of this node" and "you may not write this node" are the same answer. The drain reads EACCES as DrainDisposition::AccessDeferred and calls defer_op_without_attempt, which by design touches neither attempts nor last_error. So the op was re-deferred every DRAIN_ACCESS_RECHECK (5s) indefinitely, and every channel that could have surfaced it stayed empty: attempts 0, last_error NULL, parked counts only PARK_UNTIL rows, failing counts only attempts >= FAILING_ATTEMPTS, and the one log line was debug!. On the machine that found it, all 28 uids were absent from nodes:

select (select count(*) from pending_op p
          where exists(select 1 from nodes n where n.uid = p.uid)) as in_nodes,
       (select count(*) from pending_op) as total;
-- 0 | 28

Fix, part 1 — stop guessing. WriteAuthority { Writable, Denied, Unknown } replaces the Result<(), Errno> the drain's access check used to return (Core::uid_write_authority). require_uid_writable still collapses both refusals to EACCES, which is right for a syscall: a stale handle must not be admitted because the tree forgot the node. The drain does not collapse them — Unknown becomes DrainDisposition::AuthorityUnknown(uid), and Core::resolve_unknown_authority asks the remote:

node still there → upsert_node re-interns it and the op is deferred for one recheck, so the next pass gets a real access answer;
node gone (Ok(None) / is_gone) → record_op_failure immediately, with a message naming the vanished uid, rather than waiting out the 5-minute window to say something vaguer;
could not ask → ordinary deferral.

The authority asked about is the op's own (pending_op_authorities), so a create/mkdir refetches its parent, not the node it has not made yet. The row and its staged blob survive every branch.

Fix, part 2 — say something. Schema v27 adds pending_op.access_deferred_since. Db::defer_op_for_access stamps it on the first deferral of a run and returns the stamp on every one; Core::defer_for_access warns on the first deferral and, once the run passes DRAIN_ACCESS_DEFER_LIMIT (5 min), reports it through record_op_failure so it enters the ordinary backoff and shows up in failing_ops and the status error text. record_op_failure clears the window so each escalation re-arms it rather than firing every recheck, and an attempt the access check admits clears it too (clear_op_access_deferral). The row and its staged blob are untouched on every path — this changes only what the user can see.

The deferral window stays as the backstop for everything that does not resolve, including a refetch that keeps not helping, and AccessDeferral now carries the reason into both the log line and the recorded last_error.

Still open: the acceptance runner waits on the global queue (ManagedSyncPair.wait_for_queue), so any unrelated stuck op fails those four cases on a machine that has one — that is what turned this backlog into four apparent FUSE regressions.

B82 — A `parent_uid` cycle hangs the daemon on any short search

Status: Fixed (unverified) 2026-08-12 — unit-tested, not driven against a real corrupted database (nobody has one). Found: 2026-08-12, writing a test for B80. The test built a two-node cycle and called search; cargo test -p pdfs-core then sat at search_excludes_a_parent_cycle for 29 minutes with zero CPU before it was killed. Two earlier runs had already been abandoned to the same stall without the cause being understood — it looks exactly like a cargo lock contention problem, which is what it was first blamed on. Where: path_of (crates/pdfs-core/src/db/utils.rs), upsert_node_tx's descendants CTE (db/nodes.rs).

Root cause. Both walks are recursive CTEs using UNION ALL, which does not deduplicate, so a.parent = b, b.parent = a never terminates. The index side was never exposed — node_is_indexable_tx rejects a cycle — but a query shorter than TRIGRAM_MIN (3 chars) takes the LIKE lane, and that lane reads nodes directly and never consults the index. Every row it returns is then handed to path_of. So typing two characters into the prompt was enough, and the spin happens while holding the daemon's only SQLite connection: the mount, the drain, and every control request stop with it.

The API is what would produce such a cycle (a rename/move race, a malformed event), so this is not a "corrupt your own DB" scenario only.

Fix. path_of is depth-capped at 256 and returns the truncated path rather than hanging; path_relative_to already carried a 1024 cap, which is the precedent. The descendants CTE in upsert_node_tx got the same guard for the write side. Cycles also stay out of the index (see B80).

Still open: pin_is_pinned's ancestor walk (db/pins.rs) has the same shape and no guard. Not reached from search, so it was left alone.

B81 — Prompt labels every Drive hit "My files", including device folders

Status: Fixed (unverified) 2026-08-12 — needs a GUI/dmenu run. Found: 2026-08-12, reading the prompt while fixing B80: with B80 fixed, a device-folder hit would render as My files / Downloads, a folder that does not exist under the primary mount, while activating the same row opens ~/Downloads/…. Label and action disagreed. Where: Hit::location() (crates/pdfs-gui/src/prompt.rs), shared by the GTK prompt and the dmenu front-end.

The label was built from SearchHit::path with a hardcoded My files / prefix. The daemon already resolves a device/sync-folder hit to a real local path in mounted_path (Core::mounted_search_path), which is also what activation uses; the label now derives from that when it is set, and falls back to My files only for the primary mount.

Second defect, same area. Pin rows set is_dir from Pin::recursive (prompt.rs, dmenu.rs). That flag is pin policy — whether the subtree is kept on disk — not node kind, so a folder pinned non-recursively drew a file icon and sent an invalid OpenFile. Pin now carries an is_dir: Option<bool> resolved from the nodes row by pin_list, serde-defaulted so an older daemon (which omits it) still parses; front-ends fall back to recursive only when the node is not cached.

B80 — 29% of the account is absent from the search index

Status: Fixed (unverified) 2026-08-12 — migration replayed against a read-only copy of the live DB; not yet run by the daemon itself. Found: 2026-08-12, auditing cache.db after a user report that search felt unreliable. pdfs search tickets returned only the My Files folder Documents/Tickets, never the tickets.pdf sitting in the device folder Downloads. Counting the tables explained it:

nodes                     9252
nodes_fts                 6547     ← 2705 rows never indexed
nodes in orphan subtrees  2705     ← exactly the missing set

Where: node_is_indexable_tx (crates/pdfs-core/src/db/nodes.rs).

Root cause — the same one as B79. A node was indexed only if walking parent_uid reached a row with parent_uid IS NULL. Exactly one row is stored that way (the My Files root). A device folder's root lives in device / sync_folder and is never persisted as a nodes row, so Downloads, Pictures, Documents, Music and Videos walk up to a parent that does not exist and were judged unindexable, along with everything beneath them. Stale pdfs-acceptance-* roots hit the same path.

The v16 backfill did not share the bug — it rooted its walk at any node whose parent is null or absent. So the index was correct immediately after migrating and then lost each subtree the first time one of its nodes was rewritten. That divergence between backfill and write path is why this survived: a fresh install looks fine.

Fix. Indexability now requires only that the walk terminates with nothing trashed on the way; a cycle is still rejected explicitly (B82). MIGRATION_V21 (SCHEMA_VERSION → 21) rebuilds nodes_fts so existing installs recover without waiting for each node to be rewritten, and fixes two gaps in the v16 walk it replays: descendants of a trashed folder stay out, and the walk is depth-capped.

Replayed against a .backup of the live DB: 9276 non-trashed nodes → 9276 indexed (from 6547), 300 rows under Downloads, tickets.pdf at Downloads/tickets.pdf.

Watch for. That path is the second thing this uncovered: the backfill first seeded an uncached-parent root with an empty path, so the migration indexed tickets.pdf while a later upsert indexed Downloads/tickets.pdf — the same node with two paths depending on which code wrote it. Any future rebuild of this index has to match path_of, not invent its own root rule.

Related, not a defect. The local half of the prompt indexes 110,187 files, 63,399 of them (58%) the Go module cache. Candidates are capped at 1000 and scored after SQLite, so for a common term the pool filled with vendored files before a real one was considered — for "test", 367 of the 500 best-ranked candidates came from go/pkg/mod. SKIP_DIRS gained dist/build, a new SKIP_PATH_SUFFIXES covers go/pkg/mod, and both candidate functions gained a whole-query prefix lane ahead of the existing single-character one.

B79 — Every write in an on-demand device-folder mount fails EACCES

Status: Fixed (verified live 2026-07-31, running in a locally rebuilt 1.2.1 package since) Found: 2026-07-31, user on packaged 1.2.1: touch ~/Documents/test → Permission denied, while the same operation under ~/ProtonDrive succeeds. Where: crates/pdfs-fuse/src/state.rs, State::hydrate_access

Not a mode-bit problem — the mount root reads drwxr-xr-x and the kernel's default_permissions check passes. The denial comes from the queue guard: serve_create → Core::require_uid_writable, which intersects the access every live inode space reports for that uid (lib.rs:721) before anything reaches pending_op.

The on-demand fork itself says Owner. The primary state says Unknown:

Core::hydrate (lib.rs:1012) loads every nodes row into the primary state, including the subtrees that belong to on-demand device folders — they are on the same volume, in the same table.
A device folder's parent_uid is the device root, which is never persisted as a node. In this account's DB all six device-folder roots (Downloads, Pictures, Music, Documents, Videos, narl) have parent_uid = <device root> with no matching row, so pass 2 parks them at ORPHAN_INO.
hydrate_access then hit its "parent is not resident" branch, which had no answer and fell back to Access::Unknown — fail closed.
Unknown is not writable, so the intersection denies every create, mkdir, write, rename, setattr and trash in every on-demand mount, permanently: those entries are never re-interned in the primary state, so nothing recomputes them.

~/ProtonDrive was unaffected because its nodes descend from ROOT_INO, which ProtonFs::new hardcodes to Owner.

Two facts make this a classification bug rather than a policy one: the persisted authority Db::effective_node_access already answers Owner for exactly these uids (no share_access row covers them — the table holds only virtual~sharedwithme and one accepted share), and the design table in mount-architecture.md §2.2 says not under a share, no role → Owner, fail open. The in-memory path disagreed with both.

Fix: the non-resident-parent branch now mirrors the persisted authority — a recorded share_access row above the node still wins, otherwise fail open to Owner on the mount's own volume and fail closed to Unknown on a foreign one (State::is_own_volume). Foreign-volume shared content keeps its fail-closed behavior, which is what B34 needs.

Second-order effect, also fixed by the same change: downgrade_known_shared_access selects roots with entry.access != Access::Owner, so a ScopeAccessLost / SharedWithMeUpdated event would additionally have force-downgraded every device-folder tree to Viewer in memory.

Tests: state::tests::own_volume_nodes_without_a_resident_parent_stay_owned, foreign_volume_nodes_without_a_resident_parent_fail_closed, persisted_authority_outranks_the_own_volume_fail_open. The first fails on the pre-fix branch with left: Unknown, right: Owner. The standing live guard is the regression B79 acceptance case, which finds a mounted on-demand device folder through pdfs locations --json and writes into it (skipping when this machine has none).

Verified live (2026-07-31): the packaged 1.2.1 daemon denies touch ~/Documents/pdfs-b79-test, mkdir, and > redirect while ~/ProtonDrive accepts them; a local --release build of this fix accepts all three on the same account and DB, the write drains (pending_op back to 0, the new nodes carry real G88km… remote uids rather than local ones), and the daemon log has no 403/EACCES. ~/ProtonDrive/Shared with me/ stayed dr-xr-xr-x, and the accepted editor-role share under it stayed writable — the foreign-volume fail-closed path is unchanged.

Side note for whoever runs this next: stopping the daemon and touching a file in an on-demand mountpoint while it is unmounted leaves that file in the local directory, and restore_ondemand_mounts then refuses to mount over the non-empty dir (WARN … local dir is not empty; refusing to mount over it). Empty the directory and restart the unit.

B78 — Profile backup fails: Cannot create file at the root of a device

Status: Fixed (verified live 2026-07-31). Same defect as B68, which was found first on the managed-live matrix; B68's second half — making backup health visible — is still open. Found: 2026-07-29, user reported upload profile: proton api error NotEnoughPermissions (http 422): Cannot create file at the root of a device

The background task that backs up the machine's profile (sync folder mappings, pins, cache budget) currently attempts to write profile.json directly to the device root node (device.root_uid) on the Drive backend. The Proton Drive API has started enforcing a restriction that files cannot be created directly at the root of a device; they must be placed inside a folder.

Consequence: The upload is rejected with HTTP 422. The daemon retries when changes happen but the profile is never successfully backed up. Local changes (pinning, adding a sync folder) still take effect locally, but they will not be restorable on a new machine.

Fix applied (matches the original RECOVERY.md spec): the profile now lives in a .proton-drive-linux folder inside the device root.

pdfs_core::profile::PROFILE_DIR_NAME — the new constant, next to PROFILE_FILE_NAME.
profile.rs:ensure_profile_dir — reuses the folder by name via the existing find_device_child_folder, creating it on the first save. Reuse-by-identity matters: a second folder of the same name would split the record in two with nothing to say which is current.
profile.rs:save_profile — both upload branches (new file, new revision) now address the folder, never the device root.
profile.rs:load_profile — reads the folder first, then falls back to a device-root profile.json written by an older client. The fallback is read-only and the legacy document is not trashed: another machine may still be running a pre-fix client that reads it.
profile.rs:list_restorable_folders — filters .proton-drive-linux out, or the restore picker would offer to sync the bookkeeping back onto the machine it describes.
devices.rs:add_sync_folder — refuses a local folder named .proton-drive-linux, which would otherwise be reused as the remote profile folder by name and then reconciled (i.e. overwritten) by the sync engine.

Verified live (2026-07-31) against the real account: first save logged created device profile folder name=".proton-drive-linux" then profile backed up folders=6 with no 422; a second trigger reused the folder (no second create) and uploaded a revision; pdfs sync restore --json lists exactly the six device folders and not the profile folder.

Tests: profile::tests::the_profile_is_never_uploaded_to_the_device_root, loading_falls_back_to_a_legacy_device_root_profile, the_profile_folder_is_not_offered_as_user_data — source-level guards in the style of lib.rs's queue-guard ordering tests, because both upload branches are pure network calls with nothing to assert offline.

Not covered by this fix: B68 also asks for backup health to be visible (currently a WARN in the log and nothing in the UI), and for the replacement-machine / fresh-state restore to be re-run end to end.

B1 — FUSE rename loses the file (data loss)

Status: Fixed (verified 2026-07-20) Found: 2026-07-19, user reported mv file.mkv dir/ on the mount deleted the file Verified: the exact repro below on the new daemon — mv returns 0, the file is present in the destination listing and reads back its content. Previously it was in neither directory. Where: crates/pdfs-fuse/src/filesystem.rs, Filesystem::rename

rename ended with:

st.forget(&uid);
st.children.remove(&newparent);   // memory only

forget() deletes the node's DB row (db.delete_node). children.remove() only drops the in-memory listing, leaving nodes.listed = 1 on the destination folder. The next ls goes through ensure_children, which takes the DB fast path (children_if_listed, lib.rs:722) and rebuilds the destination from the database — where the node no longer has a row.

Net effect: file gone from the source, absent from the destination, and rename(2) returned 0. Silent loss with a success code.

Severity is worse than "stale cache": listed is a DB column, so the bad state survives a daemon restart. Nothing clears it on its own — the affected folder keeps serving the listing that omits the file indefinitely, until an event invalidation or a manual refresh happens to hit it. Confirmed on the repro folders, which still read listed=1 with no child rows minutes later.

The data itself is believed intact server-side (the move succeeded; only the local view is wrong), but that was not verifiable without a daemon restart — see the status line.

Also hits plain in-place renames (mv a.txt b.txt), same mechanism — the parent is both source and destination there.

The control-socket Core::move_to path was always correct; it used invalidate_listing, which clears the DB flag as well. The FUSE path didn't.

Fix: use the same helper.

st.forget(&uid);
st.invalidate_listing(newparent);

Repro:

cd <mount> && mkdir d && echo hi > f.txt && mv f.txt d/
# renameat2(...) = 0, but f.txt is in neither directory,
# not in trash, and absent from the `nodes` table

Note on invalidate_listing: it early-returns when the folder isn't in the in-memory children map, so it won't clear a stale DB listed flag in that case. Safe on this path (both lookup_child and the explicit ensure_children(newparent) guarantee the listing is resident), but it's a sharp edge for other callers. See B4.

B2 — The reported .mkv went to trash, the repro vanished entirely

Status: Partly resolved — mv exonerated; trash origin still unattributed Found: 2026-07-19, while chasing B1

What was settled (2026-07-19)

mv never trashes. Three repros on the mount, all with the old (pre-B1-fix) daemon:

repro	node state	destination	result
`zz-claude-repro-src.txt`	create still queued	fresh folder	vanished, not trashed
`zz-b2-settled.txt`	settled, real uid, landed	listed folder	vanished, not trashed
`zz-b3 Movie Title.mkv`	settled	folder named as the file's stem (the user's exact shape)	vanished, not trashed

So B1 fully explains the disappearance, and nothing in the rename path trashes. The .mkv reaching the trash has a different cause.

The listing the user acted on was almost certainly stale. B1/B4 make stale listings persistent — listed = 1 lives in the DB and survives restarts — so ls showing the file at 15:57 is not evidence it still existed remotely. This is the most likely reading: it had been trashed earlier and the mount kept showing it.

Ruled out:

Sync engine. reconcile_folder gates on mode == "mirror"; ~/Videos was ondemand from 15:39:27. All three sync trash sites log, and no such rows exist.
Log pruning hiding the evidence. ACTIVITY_KEEP = 2000; the table is at the cap but its oldest row is Jul 17 18:03, so the whole window is covered. The .mkv's uid appears exactly once — an Upload at 06:07:56 — and never again.
Conflict machinery. keep_as_conflict_copy uploads a new file under an alternate name; it never trashes the original.
Eviction through the mount. Was the best theory: mirror→ondemand calls evict_dir_contents, which would issue one unlink(2) per file, and FUSE unlink trashes remotely. But apply_sync_folder_mode evicts before spawn_ondemand_mount, so the deletes hit the plain local directory. Dead.
Control-socket delete. CtlRequest::Delete logs on both success and failure.

What remains: trash_child (backing FUSE unlink/rmdir) was the only trash path that wrote no activity row — so an ordinary rm on the mount, at any point after 15:39:27 when ~/Videos became a FUSE mount, would produce exactly what we see and leave no trace. Note there is also a trashed folder of the same name (Evangelion 1.11 - You Are (Not) Alone, is_dir=1, content mtime 04:57:50), which suggests this mkdir-and-move dance had been attempted earlier — plausibly followed by a manual cleanup while B1 was making files appear to vanish.

That is a hypothesis, not a finding. It is not provable from the evidence that survives.

Fix applied

trash_child now logs to the activity feed on both success ("trashed from the mount") and failure, matching every other trash site. The next occurrence will be attributable — which is the part that actually mattered here.

If it recurs

The activity log is now the first place to look. trash rows carry no trashed-at timestamp (the mtime column is the node's content mtime — for the .mkv it read 06:07:56, matching its upload, not its deletion), so the activity feed is the only ordering evidence there is.

Two different endings for what looked like the same operation, so B1 may not be the whole story:

User's Evangelion 1.11 - You Are (Not) Alone.mkv → trash, full size (1768670449) intact, recoverable via pdfs restore.
Clean repro (zz-claude-repro-src.txt) → gone entirely. Not in trash, no nodes row, nothing in the search index.

B1 explains the second. It does not explain a node reaching the trash — nothing in the FUSE rename path calls trash_nodes.

Leading theory: the trash came from the sync-conflict machinery, which is logged (ActivityKind::Trash rows exist with (sync-conflict <ts>) details). The ~/Videos folder is registered as a sync folder in ondemand mode, and had just been switched to ondemand shortly before. reconcile_folder gates on mode == "mirror", so it should have been inert — worth confirming that gate actually held, and that no pass was already in flight across the switch.

Note the file was a conflict-copy sibling of two files already carrying -003 / -004 suffixes, so the conflict path had definitely been active in that directory.

Next step: find the trash event's origin. The activity log had no row at the 15:58 mv, which points away from a logged (control-socket / sync) path — but the timestamp bug in B3 made that table hard to read, so re-check with correct scaling before trusting the absence.

B3 — Activity log timestamps written in seconds, read as milliseconds

Status: Not a bug — investigator error, kept as a record Found / retracted: 2026-07-19

Originally filed because every activity row rendered as 1970-01-21 …. That was an artifact of the ad-hoc debugging query, which divided by 1000; the code never does. Seconds are consistent end to end:

writer — log_activity uses now_secs() (pdfs-fuse/src/lib.rs)
schema / activity_list — pass the value through untouched
reader — activity_time calls glib::DateTime::from_unix_local(secs)

The correct manual query, for next time:

select datetime(time,'unixepoch','localtime'), kind, target, detail, ok
from activity order by time desc limit 40;

Worth noting because the bad query is what made the activity log look empty around the reported mv — which is evidence B2 leans on. That absence has since been re-checked with correct scaling and it does hold: no row at 15:58.

B4 — `invalidate_listing` silently skipped non-resident folders

Status: Fixed (verified 2026-07-20, via B1's repro — the FUSE rename path that depends on this helper now behaves correctly end to end) Found: 2026-07-19, reviewing the B1 fix Where: crates/pdfs-fuse/src/state.rs:257

if self.children.remove(&ino).is_none() {
    return;              // never clears the DB `listed` flag
}

The early return assumed "not in the hot cache ⇒ nothing to invalidate", which stopped being true once listings became DB-backed. A folder trimmed from the in-memory map but still listed = 1 in the DB could not be invalidated at all — callers thought they had dropped the listing, and ensure_children would happily rebuild the stale one.

Fix: drop the early return; always clear the flag. Costs one redundant UPDATE when nothing was cached.

Core::refresh_dir had been hand-rolling a workaround for exactly this (clearing the DB flag itself, then reaching into state.children directly, with a comment explaining why it couldn't use the helper). It now just calls invalidate_listing. Behaviour change worth knowing: refresh_dir used to propagate a DB write failure to the caller of CtlRequest::Refresh; it now warns and reports success, matching every other invalidation site.

Test: a_deleted_child_leaves_a_listed_parent_serving_a_stale_listing in pdfs-core/src/db/tests.rs pins the B1/B4 mechanism at the DB layer — a deleted child plus a still-listed parent yields a listing that silently omits it.

B5 — `ls -l` costs a network round trip per file (thumbnail xattr probes)

Status: Fixed (verified 2026-07-20) Found: 2026-07-19, investigating "exa -l is slow in the mounts, exa is fast"

Reproduced (2026-07-19)

All runs cold (35 s wait to clear the 30 s attr TTL). exa needs only readdir; exa -l stats every entry, so the delta is per-entry metadata cost:

mount	entries	`exa`	`exa -l`	delta per entry
primary `~/ProtonDrive/Installer`	34	10 ms	11 ms	0.03 ms
on-demand `~/Documents`	45	27 ms	54 ms	0.6 ms
on-demand `~/Videos/[Reaktor] FMA …`	65	73 ms	193 ms	1.85 ms

Cause (2026-07-20): a network round trip per file per xattr name

strace -f -T on a cold exa -l of the 65-file .mkv directory:

lgetxattr(".../E01 ....mkv", "user.proton.thumbnail", NULL, 0) = -1 ENODATA <0.186435>

129 lgetxattr and 258 llistxattr calls for 65 entries, each lgetxattr ~186 ms. Three things compounded:

listxattr advertised user.proton.thumbnail + user.proton.preview for every file, regardless of whether that file could have one. An xattr-aware lister then asks for each advertised name — two getxattr per entry.
Core::thumbnail cached only success. download_thumbnail returning None — the normal answer for a .mkv — was never remembered, so every listing re-asked the API and was re-told nothing, forever.
getxattr ran inline on fuser's dispatch loop, not on the Workers pool. lookup and readdir had been moved off it (PERF #1.0); this one was missed. So each 186 ms miss stalled every other op on the mount, which is why the concurrency exa does have bought nothing.

The mount-kind correlation was a red herring. It tracks file type, not the fork: ~/Videos is .mkv (Proton generates no thumbnail — always a miss), ~/ProtonDrive/Installer is installers whose probes were already warm. The fork_state theory in the previous write-up is wrong; forked and primary mounts run the same code and neither is at fault. Worth noting as a lesson — three measurements on different directories looked like a mount-kind effect because nobody had varied file type independently.

Fix

listxattr advertises the names only for image/* and video/* media types. getxattr still honours an explicit request for an unadvertised name, so nothing becomes unreachable. Everything else — documents, installers, archives — now costs zero round trips per listing.
Core::thumbnail remembers misses in no_thumbnail, keyed (uid, type) and validated against the node's mtime exactly as the positive side is. Bounded by clearing at MAX_THUMBNAIL_MISSES (8192).
getxattr hands off to Lane::Meta, so a miss can never block the dispatch loop.

A video directory still pays its misses once per revision (image/video is where a thumbnail plausibly exists, so the probe is legitimate) — but in parallel, and never again.

Verified (2026-07-20)

Cold runs (40 s wait each) on the restarted daemon:

measurement	before	after
`~/Videos/…FMA…` (65 `.mkv`) cold `exa -l`	193 ms	14 ms
`~/Documents` (45 entries) cold `exa -l`	54 ms	13 ms
`user.proton.*` probes over the 65 `.mkv`	130	0
`~/Documents` probe latency, 1st listing	124–395 ms	124–395 ms
`~/Documents` probe latency, 2nd listing	124–395 ms	0.26–0.67 ms

Each part of the fix is separately visible in the traces:

The advertising gate. The .mkv directory now issues zero user.proton.* probes; the only remaining lgetxattr is exa's own security.selinux at ~0.3 ms. Note this means Proton does not report those files as video/* — the gate is excluding them by media type, not because they are known to lack a thumbnail. A video whose media type is generic no longer advertises one even if it has it; getxattr still serves an explicit request, so it stays reachable. Worth revisiting if thumbnails ever go missing in a file manager.
The negative cache. ~/Documents holds 10 .png files, correctly still advertised, so it probes 20 times on both passes — but the second pass answers in 0.26–0.67 ms instead of going to the wire. That is the whole point: the probes that are legitimate stop being expensive after the first.
The worker handoff. Pass 1 on ~/Documents shows interleaved <... lgetxattr resumed> lines across several tids, i.e. the misses now overlap instead of serializing behind the dispatch loop.

Secondary finding (still open): `lookup` is O(n) per name

Where: crates/pdfs-fuse/src/filesystem.rs, serve_lookup

serve_lookup linear-scans the parent's children comparing names, and with no readdirplus that is one lookup per child — O(n²) name comparisons under the global state lock for a listing.

Real, but not what made this slow: it costs the same on both mount kinds and at 65 entries a linear scan is nanoseconds against a 186 ms round trip. Two candidate optimizations were considered and deliberately not applied, and that judgement still holds now the real cause is known:

Per-directory name -> ino map. A second structure that must stay in sync with children — the two-halves-of-one-cache shape that caused B1 and B4.
readdirplus (fuser 0.17 supports it; we return ENOSYS). The right shape long-term, but it is a rewrite of the directory-read path and it would have hidden this bug rather than explained it.

Measurement notes for next time

Cold requires a 35 s wait per run (30 s attr TTL). Warm runs show ~6 ms regardless and prove nothing.
strace -c on exa needs -f — exa is multithreaded, and without it the trace captures only main-thread startup (3 statx calls, no getdents).
-T (per-call durations) is what cracked this; -c summaries attribute time across threads in a way that hid the 186 ms constant.

B6 — Daemon sets no file modes: `control.sock` is an unguarded authority

Status: Fixed (verified 2026-07-20) Found: 2026-07-19, while writing the plaintext-at-rest threat model in docs/ARCHITECTURE.md §8. Not from a report — from checking a claim before asserting it in a doc. I had written "their default 0700 permissions protect them", went to verify, and found we set no modes at all. Where: crates/pdfs-fuse/src/mount.rs (UnixListener::bind(control_socket)), crates/pdfs-core/src/config.rs (create_dir_all on state/cache dirs)

grep -rn "set_permissions\|from_mode" crates/pdfs-core/src crates/pdfs-fuse/src returns exactly one hit, and it is shell.rs setting 0755 on a generated script. Nothing else sets a mode. So:

state and cache directories are created at 0777 & ~umask — typically 0755
control.sock is bound at the same, typically 0755

Anything that can connect to the socket drives the daemon with its authenticated session: enumerate the tree, read file contents, upload, trash, create public share links. No credential is required — the keyring is never consulted, because the daemon already holds the session.

The only thing preventing this today is that ~/.cache and ~/.local/state are conventionally 0700. That is a property of the user's system, not something we establish or check. It does not hold on a machine with a permissive umask, a group-shared home, or a home restored from a backup that flattened modes.

Severity: low on a single-user desktop, real on a shared or multi-user host. It is a privilege boundary rather than a data-at-rest issue, which is what makes it worth more than the cache-plaintext point it was found next to.

Fix: chmod 0600 on the socket immediately after bind (before the listener thread starts accepting), and 0700 on the state and cache directories at creation. Both are a few lines. Worth also asserting the socket mode in a test, since a regression here is silent.

Fixed 2026-07-19: AppDirs::ensure now sets 0700 on the state, cache, and config directories on every start (not just at creation, so an existing permissive directory is tightened), and config::restrict_socket sets 0600 on both the control socket and the tray socket immediately after bind. A socket whose mode cannot be set takes the daemon down rather than serving unguarded; the tray's is best-effort, since it only guards single-instancing. Unit tests in config.rs assert both modes.

Verified 2026-07-20 on the restarted daemon — all three directories now read drwx------ and both sockets srw-------, against drwxr-xr-x / srwxr-xr-x before.

Measured exposure at the time of the fix: the directories really were drwxr-xr-x and the live socket srwxr-xr-x, but ~/.cache and ~/.local were both 0700 on this machine, so nothing was reachable in practice. The bug was a latent dependency on those parents, not a live hole. Removing the dependency is the point.

B7 — renamed directory reads as missing until the entry TTL expires

Status: Fixed (verified 2026-07-20) Verified: mkdir "zz-b7 Old Name" with a file inside, mv to a new name, then an immediate ls and cat through the new name — both succeed with no wait. The directory used to return ENOENT until the entry TTL expired. Found: 2026-07-19, user renamed a folder on the mount with mv. ls of the parent listed the new name, but ls <newname>/ returned ENOENT — repeatedly, so not a one-shot race. It self-healed on its own a few minutes later, and the files were all intact: this is a visibility bug, not data loss. Where: crates/pdfs-fuse/src/state.rs, State::relocate

Cause: the online rename path ended with relocate, which called forget on the moved node. forget drops the node's by_uid mapping, so when the invalidated parent listing re-enumerated, intern_mem allocated it a fresh inode. But the kernel had already carried the renamed dentry over to the old inode number, and it holds that dentry for the entry TTL. Every lookup, getattr and opendir through it resolved to an inode entries no longer held:

entries.get(old_ino) -> None -> ENOENT

readdir of the parent went the other way — it walks children and reports the new inode — which is exactly why the directory listed fine but could not be entered. Once the TTL expired the kernel re-looked-up the name, got the new inode, and everything worked again.

Fix: relocate now rewrites the node in place (rename_in_place) and invalidates both parents' listings, instead of forgetting it. The inode is preserved, so the kernel's dentry stays valid and the re-enumeration reuses the same by_uid slot. Both relocate tests now assert inode stability; that property was untested, which is how this got through the B1 fix.

Note: dropping the forget also stops the moved node's DB row from being deleted and re-created on every move — the row is updated instead, which is what the B1 fix was working around from the other side.

Status: Implemented, partially verified — the bridge is proven, a real gate is not Found: 2026-07-19, user hit proton api error Unknown (http 422): For security reasons, please complete CAPTCHA and had no way to answer it. Where: SDK api.rs/http.rs/session.rs, pdfs-core/src/auth.rs, pdfs-gui/src/app/pages/verify.rs

Cause: three gaps stacked, none of which is a bug on its own.

ResponseCode had no 9001, so the gate deserialized to Unknown — which is why the error read as an opaque failure rather than a recoverable prompt.
Nothing read Details.HumanVerificationToken, and the client never sent the x-pm-human-verification-token{,-type} headers the retry needs.
No UI could render Proton's hosted verification page.

Fix: HumanVerification (challenge) + HumanVerificationCredential (answer) in the SDK, header plumbing on the session-less login calls, and ProtonApiSession::begin_verified. pdfs-core promotes a solvable gate to Error::HumanVerificationRequired and auth::login_interactive re-runs the login with the earned token — the retry lives in core because the gated attempt burns its SRP handshake, which no front-end should have to know. The GUI hosts the page in a WebKitWebView (webkit6 0.4, pairs with the existing gtk4 0.9) and bridges the page's postMessage to a script message handler.

Deliberately not done: email/sms verification methods (the token arrives out of band, so the webview cannot complete them — such a gate stays a plain API error rather than opening a page the user cannot finish), HV on authenticated endpoints (only the login path is plumbed), and re-gating of the retry (a second challenge means the token was rejected; looping would trap the user).

Verified: the WebKit bridge end-to-end with a throwaway probe — handler registers, the page's postMessage arrives, non-completion messages are filtered, the completion token round-trips. Unit tests cover 9001 parsing, the challenge/Details shape, URL escaping, and message filtering.

Not verified: a real gated login against verify.proton.me. It cannot be triggered on demand, so the exact message shape Proton's page posts is taken from its documented contract, not observed. If verification appears to hang with the page solved, that is the first thing to check — extract_token in verify.rs is the single place that decides what counts as completion.

Note: the SDK half shipped as proton-sdk / proton-drive-rs 0.1.11. The workspace requirement was widened to "0.1" at the same time, so later 0.1.x releases are picked up by cargo update without an edit here.

B9 — Enter did not open the selected result in the launcher

Status: Fixed (verified) Found: 2026-07-19, user reported Enter doing nothing in pdfs-prompt while the arrow keys and Escape worked normally. Where: crates/pdfs-gui/src/prompt.rs, the window key controller

Cause: key-event phase, not key handling. gtk4::Entry — really its inner GtkText — binds Return to its own activate and consumes it. The launcher's EventControllerKey is attached to the window in the default bubble phase, so the focused entry saw Return first and the window handler was never reached. Escape and Up/Down worked precisely because GtkText has no bindings for them and they bubbled up as intended.

That asymmetry is the tell: when some keys reach a window-level controller and others silently don't, the ones that don't are being claimed by the focused widget.

Fix: Return moved off the window controller and onto entry.connect_activate. Enter while focus is in the results list was already handled by row_activated, so the two together cover both focus positions.

Rejected alternative: setting the window controller to PropagationPhase::Capture. It fixes the symptom by putting the handler ahead of the entry — but ahead of it for every keystroke, not just Return, which puts text input and IME composition behind a handler that has no business seeing them. The narrow fix has no such blast radius.

Verified: live. Pressing Enter logged opening path=…, the daemon hydrated the file, and xdg_open ran.

B10 — GLib critical when the launcher closes over an in-flight open

Status: Open (side finding) Found: 2026-07-19, seen in pdfs-prompt output immediately after a successful Enter-to-open while verifying B9.

GLib-GIO-CRITICAL: g_list_store_remove: assertion '!g_sequence_iter_is_end (it)' failed

What is known: it fires right after the opening path=… log line, i.e. during xdg_open + window.close(). It is a warning, not a crash — the open itself succeeded.

What it is not: the launcher's own row handling. Section::set_rows walks GtkListBox children (first_child/remove) and touches no GListStore, so the failing store belongs to GTK/libadwaita internals, most likely something teardown-ordering related in the app/window bookkeeping as the window is closed while a launch is still settling.

Why it was not chased: it appeared while verifying an unrelated fix and has no user-visible effect. Worth revisiting if the launcher ever misbehaves on close (a hang, a lost open, or a stale window), since an assertion firing during teardown is exactly the shape of bug that later turns into one of those.

Where to start: run pdfs-prompt under G_DEBUG=fatal-criticals to turn the warning into an abort and get a real backtrace naming the store.

B11 — a file moved while its create is still queued reads as empty

Status: Fixed (verified 2026-07-20) Found: 2026-07-20, while verifying B1 on the restarted daemon.

The B1 repro is echo hi > f.txt && mv f.txt d/, i.e. the move lands while the create is still queued for upload. Immediately after the mv, the file is present in the destination listing — B1 is genuinely fixed — but stats as 0 bytes and cat returns nothing:

-rw-r--r-- 1 narl narl 0 Jul 20 00:29 zz-b1-dst/zz-b1-src.txt

A few seconds later the same file reads correctly (3 bytes, hi). A control file created and read without an intervening mv was correct immediately.

Cause: State::intern_mem replaces an existing entry's node wholesale (e.node = node). A move invalidates both parents' listings (that is B7's fix, and it is correct), so the next ls re-enumerates — and the node that comes back, from the remote or from its DB row, carries the size of the revision the server holds. For a file whose write is still queued that is the pre-write size, usually 0. Interning it reverts the optimistic size record_pending_write had stamped.

Why an empty read rather than a short one: a file that stats as 0 bytes gets no read from the kernel at all. read_range would have served the staged blob quite happily; it is never asked. So the file reads as empty for as long as the stale size stands, and "empty file" is indistinguishable from "file whose contents were lost" to whatever is reading.

Core::hydrate already solved exactly this for the restart case — it stamps each pending write's size onto the node as entries materialize. The protection was simply missing on every live re-enumeration path.

Fix: Core::stamp_pending_sizes re-applies the optimistic size to a batch of nodes, called from both arms of ensure_children (the DB fast path and the network path) before the state lock is taken. It snapshots the pending map first and returns: no site in the daemon holds pending and state at once, and this is not the place to become the first — hydrate established that pattern for the same reason.

Scoped to ensure_children deliberately. The other intern sites are single-node and all authoritative by construction (mkdir, create, an upload that just landed); drain.rs's post-upload adoption is supposed to take the server's node, and already handles the queued case through rebaseline_pending.

Tests: pending_size_tests in pdfs-fuse/src/lib.rs covers the queued file keeping its size, a settled sibling keeping the server's, folders being left alone, and an empty pending map changing nothing.

Verified 2026-07-20 on the rebuilt daemon: echo hi > f.txt && mv f.txt d/ then an immediate ls -l and cat gives 3 bytes and hi, against 0 bytes and empty output before.

B12 — cold enumeration is slow per entry, and goes superlinear past ~500

Status: Both causes fixed and verified (2026-07-20); attr-invalidation follow-up unverified Found: 2026-07-20, measuring improvements.md P2.8 ("pipeline enumerate_nodes_detail") before implementing it, to decide whether the bottleneck was network or crypto.

Measured (cold; `pdfs refresh <dir>` then a timed `ls -1`)

entries	time	per entry
1–9	350–550 ms	fixed cost
34	629 ms	—
147	1.92 s	12.5 ms
251	3.18 s	12.4 ms
484	6.25 s	12.5 ms
793	38.8 s	48.9 ms

The 793 figure reproduces to ±100 ms across three runs. Marginal cost from 484 to 793 is 106.7 ms/entry, 8.5× the baseline.

perf record against the running daemon shows ~90 % of cycles inside the pdfs binary in both cases, and sample counts matching wall time (1022 samples ≈ 5.1 s, 7538 ≈ 37.9 s at 199 Hz) — so this is CPU-bound throughout, not waiting on the network. Symbols are unavailable (the installed binary is stripped), which is what blocks attribution.

Cause 1 (found, ~half the baseline): every FTS row is deleted by a full scan

nodes_fts declares uid as UNINDEXED:

CREATE VIRTUAL TABLE nodes_fts USING fts5(uid UNINDEXED, name, tokenize='trigram')

and Db::upsert_nodes (pdfs-core/src/db/nodes.rs) deletes by exactly that column on every node, because "FTS5 has no UPSERT":

DELETE FROM nodes_fts WHERE uid = ?1

An UNINDEXED FTS5 column is not searchable, so the predicate cannot use an index. EXPLAIN QUERY PLAN confirms it:

`--SCAN nodes_fts VIRTUAL TABLE INDEX 0:

One full scan of the FTS index per node written. Measured on a .backup copy of the live 171 MB DB (17 443 indexed nodes):

deletes	time	per delete
484	3.09 s	6.4 ms
793	5.26 s	6.6 ms

So ~6.5 ms of the 12.5 ms per-entry baseline is this one statement, and it gets worse for every user as their node count grows — the scan is over the whole index, so the cost of writing any listing scales with the size of the account. It is also paid by every sync pass and every event-driven refresh, not just ls.

Fix direction: delete by rowid instead. FTS5 deletes by rowid efficiently, so map nodes.rowid to the FTS rowid and drop the uid column from the index (or keep it UNINDEXED purely for retrieval). Needs a schema migration on a live 171 MB DB, so it wants its own change rather than being smuggled into this one.

Cause 2 (the dominant one): an S2K key derivation per file, to list a folder

Symbols came from the local unstripped build, not a new install. strip preserves both the build id and the text addresses, so when /usr/bin/pdfs and target/release/pdfs reported the same build id, the stripped binary was just a copy of the local one and perf buildid-cache -a target/release/pdfs was enough to symbolise a recording of the running daemon. Worth remembering — it turned a "needs another install + restart" into a five-second step.

Hot functions over a 793-entry cold enumerate:

%	symbol
64.4	`sha2::sha256::x86::digest_blocks`
6.0	`<D as digest::DynDigest>::update`
5.7	`sqlite3VdbeExec` (cause 1, above)
4.0	`sha2::sha256::compress256`
1.5	`pgp::types::s2k::StringToKey::derive_key`

~74 % of the listing is SHA-256 inside PGP's S2K, i.e. the per-file node-key unlock that build_node does under NodeDetail::Full. derive_key itself shows 1.5 % because the time lands in its SHA leaf. Nothing downloads during an ls, so PGP is the only plausible source of that SHA.

The "cliff past ~500" framing was wrong

That was an inference from a single folder, not a measurement. An S2K's cost is set by the iteration count in the key packet, which is chosen by the client that uploaded the file — so it varies per file, not per listing size. Every folder measured sits at 12–16 ms/entry except Music/aC_ID.dll at 49 ms, and Music/ELDEN RING SOUNDTRACK (67 files, same parent tree) is ~16 ms/entry, so it is not "Music files are expensive" either. A 4× jump for a 1.6× change in n fits "those files were uploaded by a client using a costlier S2K" far better than a size threshold. n and folder identity are confounded in the data — there was only ever one folder above 500 entries.

Left unresolved deliberately: the fix below removes the per-file S2K from the listing path entirely, so which of the two explanations held stopped mattering. To settle it anyway, log the S2K iteration count per file across one enumerate of each folder.

Fix: enumerate cheap, upgrade sizes in the background

ensure_children now calls enumerate_nodes_light, which skips the file node-key unlock (folders are still unlocked — their keys are what the children decrypt with). The listing is served from that immediately.

Light returns no claimed_size, and ls -l wants sizes, so a naive split would just move the same S2K onto the first stat. Instead Core::spawn_size_upgrade fetches the full nodes for that folder on a worker, batched, after the listing has been answered, and adopts only the size — re-interning wholesale would clobber a name or parent that a concurrent rename/move had changed. It is single-flight per folder, because a stat of one entry in a fresh listing means a stat of all of them. Queued writes keep their optimistic size through it, via the same stamp_pending_sizes that B11 added.

Three entry points cover every way a provisional listing can appear: the network enumeration, the DB fast path (rows persisted before an upgrade ran), and getattr itself (a listing restored by hydrate on mount, which ensure_children returns early for).

Known tradeoff — sizes are provisional until the upgrade lands. node_size falls back to total_size_on_storage, the ciphertext size, so a stat in that window reads slightly too large. Reads are unaffected: the revision reader carries its own authoritative size. Deliberately not the B11 shape — that reported 0, which made the kernel skip reads entirely; too-large is cosmetic and self-corrects.

The window was longer than "a round trip", and that took a correction. The daemon has the real sizes quickly, but the kernel keeps the provisional attrs for the full 30 s entry TTL, so ls -l kept reporting them long after the DB was right. This nearly caused a misdiagnosis during verification: two successive ls -l runs agreed with each other and both disagreed with the truth by a constant +59 bytes, which reads exactly like "the upgrade never ran". Querying the DB directly is what separated "not computed" from "computed but not visible".

Closed by having spawn_size_upgrade call notifier.inval_inode for the inodes it corrected, after the DB write so a provoked re-getattr cannot race the persistence. That needed a Notifier on Core (a OnceLock, since the session is built from the Core), and a fresh one per on-demand fork — each fork has its own inode space, so notifying through the primary mount's channel would name inodes that session has never heard of.

Verified (2026-07-20)

folder	before	after
`Music/aC_ID.dll` (793)	38.8 s	4.48 s (8.7×)
`InstantUpload/Camera` (484)	6.25 s	2.91 s (2.1×)
`Pictures/old` (417)	5.10 s	2.25 s (2.3×)

Schema v15 migrated the live 171 MB DB on start (17 443 rows indexed). All 793 sizes converge to exactly their pre-change values, checked against a .backup copy taken before any of this landed. The +59-byte ciphertext delta is a precise probe for a provisional size, and is what the attr-invalidation follow-up should be tested with.

Original cause-2 ruling-out (kept — all still true)

Backing cause 1 out of the totals leaves per-node non-FTS cost at 6.2 ms at n=484 but 42 ms at n=793. Something gets ~7× more expensive per node, sharply, somewhere around 500–800 entries.

Ruled out so far:

Chunking / network. MAX_BATCH_COUNT = 150, so cost would rise in visible steps at 150/300/450; it is flat at 12.5 ms/entry straight through 484. The marginal cost would imply ~16 s per POST, which is absurd.
Composition. Both the 484 and 793 folders are 100 % files, no subfolders.
FOLDER_KEY_CACHE_CAP (512). Suspicious number, but folder_keys only holds folder keys and these children are all files, so nothing is inserted during the walk. resolve_parent_key_ctx caches each ancestor it derives, and all children share one parent, so it is a hit after the first child.
The entity cache. InMemoryCacheRepository is HashMap-backed, O(1) set.
FTS (cause 1). Linear — 3.1 s → 5.3 s where the cliff is 6.1 s → 38.8 s.

Next step: symbol-level profile. Needs an unstripped pdfs installed and the daemon restarted, then perf record -p <pid> across a 793-entry enumerate. Every cheaper avenue above has been spent. Note a second daemon is not an option for this: Proton refresh tokens are single-use, so a parallel session would fight the running daemon for them.

Do not implement improvements.md P2.8 before this is understood. Pipelining would parallelize the cliff rather than remove it, and at 793 entries the cliff is 33 s of the 38.8 s — far more than concurrency could win back.

B13 — `rename` over an existing destination fails instead of replacing it

Status: Fixed (unverified — needs a real rsync against the rebuilt daemon) Found: 2026-07-20, user ran rsync -rauLP ~/ProtonDrive/Music/... ~/Music/ (both are protondrive mounts) and every single file failed at the end of its transfer:

rsync: [receiver] rename ".../.Buunshin - heimwee (Original Mix).wav.b0akm3"
    -> ".../Buunshin - heimwee (Original Mix).wav": Input/output error (5)

Where: crates/pdfs-fuse/src/filesystem.rs, Filesystem::rename

Daemon log, one per failed file:

ERROR pdfs_fuse: rename failed uid=… error=proton api error AlreadyExists (http 422):
    A file or folder with that name already exists
WARN  pdfs_fuse::drain: pending upload failed; will retry uid=… attempts=1
    error=proton api error DoesNotExist (http 422): File or folder not found

Cause: rename(2) is specified to atomically replace an existing destination. Our handler just calls client.rename_node, and Proton refuses a name that already exists — so the 422 becomes a blanket EIO. Nothing in the path ever looks up the destination name.

This breaks every write-to-temp-then-rename tool, which is most of them: rsync, editors doing atomic saves, mv -f, package managers. The failure is at the end of the transfer, so the bytes are uploaded and then thrown away — the user pays full upload cost for nothing.

Second-order damage: the failed rename leaves the temp node behind and its queued upload then fails with DoesNotExist and retries forever. So each failed file also leaves a poisoned entry in the drain queue.

Fix: rename now looks up newname under newparent and, if it resolves to a different node, removes it before the API call.

The order is forced by Proton: the name has to be free before rename_node will take it, so it is trash-then-rename, which means the operation is not atomic. Core::remove_replaced does the trashing and Core::restore_replaced puts the node back if the rename then fails — on every failing path, including the queued ones. If the restore also fails the node stays in the trash and says so loudly, because the alternative is a file the user believes was merely renamed sitting somewhere they will not look.

Deliberate details:

Refusals happen before anything is trashed. check_replaceable is a pure function for exactly this reason: every Err it returns is a case where the destination must survive, and a mistake there turns a refusal into deletion. EISDIR / ENOTDIR when the two ends disagree about being a directory, and ENOTEMPTY for a non-empty destination directory — Proton trashes a folder with its whole subtree, so allowing that would discard every file underneath without ever naming them.
RenameFlags is now read (it was _flags). RENAME_NOREPLACE returns EEXIST instead of replacing; RENAME_EXCHANGE returns EINVAL, since no Proton primitive swaps two names and emulating it would leave a window in which one of them does not exist.
A node whose own create is still queued never reached the server, so replacing it just discards its queued ops — no API call, and it works offline.
Renaming a node onto its own name stays a no-op rather than a self-replace.

Tests: replace_tests in pdfs-fuse/src/lib.rs covers all five decisions. The trash/restore half needs a live server and is not covered.

Repro: cd <mount> && echo a > x && echo b > y && mv y x → was EIO, should now succeed with x holding b.

B14 — provisional (ciphertext) sizes make rsync read short and abort the file

Status: Fixed (unverified — needs a cold folder on the rebuilt daemon) Found: 2026-07-20, same rsync run as B13. Alongside the receiver errors, the sender failed to read its own source files:

rsync: [sender] read errors mapping "/home/narl/ProtonDrive/Music/…/
    Buunshin - i think i feel... (Original Mix).wav": No data available (61)

Where: node_size (pdfs-fuse/src/lib.rs:3480) + Core::spawn_size_upgrade

Cause: this is B12's known tradeoff surfacing as a real transfer failure. Until the background size upgrade lands, node_size falls back to total_size_on_storage — the ciphertext size, which is larger than the plaintext (measured at +59 bytes on this account). B12 called that "cosmetic and self-corrects" because it only affects ls -l.

It does not only affect ls -l. ENODATA (61) is what rsync sets on a short read: map_ptr in fileio.c asks for the bytes stat promised, gets fewer, and marks the mapping ENODATA. So a reader that trusts st_size — rsync, anything using mmap, sendfile, or a sized read loop — sees a truncated file and errors out. That is the same class of bug as B11, just from the other direction: B11 reported too small (0) so the kernel skipped reads entirely; this reports too large so reads run off the end.

The 30 s attr TTL makes the window much wider than the upgrade's own latency (B12 documented this), so a cold rsync of a large tree is essentially guaranteed to hit it.

Why it looked fine afterwards: re-listing the same directory now shows every size correct, because the upgrade has long since landed. The bug is only visible cold. Reproducing it needs pdfs refresh <dir> immediately before the read.

Fix: a provisional size is never published. getattr on a file whose claimed_size is unknown now resolves it before replying, instead of replying with the ciphertext size and upgrading afterwards.

The cost is one batched round trip per folder, not one per file: ls -l is one getattr per entry, and they collapse onto a single upgrade. B12's split is still doing its job — a plain ls never reaches this path at all, which is where the 8.7× came from.

That required making the upgrade awaitable, which is most of the change:

size_upgrades went from HashSet<u64> to HashMap<u64, Arc<SizeUpgrade>>, a condvar per folder. Followers wait on it; there may be hundreds for one folder, so it releases all of them.
The leader does the fetch on its own thread rather than handing it to a worker. This is the part to not undo: getattr waits on Lane::Meta, so a leader that queued its fetch onto that same lane could have a wide enough ls -l fill the lane with threads waiting for a job that can never be scheduled.
SizeUpgrade::WAIT caps the wait at 10 s, falling back to the provisional size. A stat that never returns is worse than one that is briefly wrong.
upgrade_sizes owns the single-flight bookkeeping and has one exit path; apply_size_upgrade holds the body it used to inline, so a failed fetch still releases the waiters and leaves the folder retryable.

Tests: size_upgrade_tests covers the follower being released, a waiter arriving after finish (it checks the flag, not the notification, which it would miss), and all waiters waking.

Not covered, worth watching: Lane::Meta can now hold waiting getattrs. There is no deadlock — leaders never queue their own work — but a cold ls -l across many folders at once could occupy the lane. If metadata ops start feeling sticky under heavy cold listing, this is the first suspect.

Verified (2026-07-20) — correct, but expensive, and not completely closed

Two further holes turned up during verification; both are fixed, and the second is the one that mattered.

upgrade_sizes_for_parent early-returned when the parent listing was not resident in children — and a rename invalidates exactly that, so a freshly renamed file always landed in the dead branch. stat read 67 bytes for a 16-byte file, and cat returned the 16 real bytes followed by 51 NULs. The same shape as B4: an early return that assumed the hot cache was authoritative. Now falls back to resolving the single node, keyed by its own inode.
lookup replies with attrs and a TTL too. With no readdirplus, ls -l is one lookup per entry and zero getattr calls — so fixing only getattr fixed a path ls -l never takes. This is worth remembering: the first fix looked right and did nothing for the reported symptom. serve_lookup now resolves as well, taking an off_loop flag because lookup's warm path runs on the dispatch loop where it may not block (B5).

measurement	before fix	after fix
cold `ls -l`, 7-file wav folder	ciphertext sizes	exact settled sizes
renamed file `stat` / `cat`	67 B, 51 NULs	16 B, clean
cold plain `ls`, 793 entries	4.48 s	4.58 s (B12 intact)
cold `ls -l`, 793 entries	~4.5 s, wrong sizes	85.8 s, 785/793 correct

The cost, and the part still open

A cold ls -l of a 793-entry folder went from ~4.5 s to 85.8 s. That is not a flaw in the batching — it is B12's cause 2 arriving on schedule. A real claimed_size requires the per-file node-key unlock, i.e. one S2K per file, and that work is single-threaded. B12 removed it from the listing path; asking for sizes puts it back, because sizes are what it produces. Plain ls is untouched, which is why the split is still worth having.

8 of 793 entries still came back provisional, caught by diffing the cold listing against a settled one. Those are SizeUpgrade::WAIT timeouts: the leader takes ~80 s for the batch and a waiter gives up at 10 s. So the bug is rarer but not gone — it now needs a folder large enough that the batch outruns the cap.

Per-chunk wakeup (done, unverified)

The timeout gap is closed by releasing waiters per chunk instead of once at the end. SizeUpgrade carries a generation counter; run_size_upgrade fetches in SIZE_UPGRADE_CHUNK (150, the SDK's own MAX_BATCH_COUNT, so one chunk is one request), applies each chunk, and bumps the generation. A waiter re-checks whether its own node now has a real size and returns if so — it no longer waits on the other 792.

Two structural points worth keeping:

The batch runs on its own thread, not the Workers pool. Callers wait on Lane::Meta, so queueing the batch there could let a wide ls -l fill the lane with threads waiting for a job that can never be scheduled. Lane::Transfer would swap that deadlock for starvation behind bulk reads. One short-lived thread per folder, bounded by the single-flight, avoids both.
wait_for evaluates its predicate with no SizeUpgrade lock held. The predicate reads state, and the applying thread holds state before it signals; taking them in the other order would close the cycle.

This does not make a full cold ls -l faster — every size still has to be computed. It makes each individual stat return after its own chunk rather than after the whole folder, and removes the provisional-size fallback that the 10 s cap was producing.

Tests: size_upgrade_tests covers the resolving chunk releasing a waiter, an unrelated chunk not releasing one, finish releasing an unresolved waiter, the already-resolved and post-finish arrivals, all waiters waking, and the timeout backstop still firing.

Plan: parallelise the per-file S2K (the 85 s)

This is the only item that reduces the work rather than redistributing it, and it is the same bottleneck as improvements.md PERF #5 — approached from sizes rather than from cold navigation. Filed here because B12/B14 are what produced the measurements it needs.

The claim to be tested first, before any code. B12's profile of a 793-entry cold enumerate attributed 64.4 % of cycles to sha2::sha256::x86::digest_blocks and ~74 % overall to SHA-256 inside PGP's S2K, i.e. the per-file node-key unlock in build_node under NodeDetail::Full. If that still holds for the size upgrade path specifically — it is the same enumerate_nodes call, so it should — then the work is CPU-bound, embarrassingly parallel across files, and currently serialised on one thread.

Step 0 — confirm, do not assume. Re-profile against the size-upgrade path now that it is the thing on the critical path:

perf buildid-cache -a target/release/pdfs      # symbols; see B12's note on strip
perf record -p <daemon pid> -- sleep 90
# meanwhile: pdfs refresh Music/aC_ID.dll && ls -l Music/aC_ID.dll

Expect the same SHA-256 leaf. If it is not dominant, stop — the rest of this plan is aimed at the wrong thing.

Step 1 — establish the ceiling. The upgrade is enumerate_nodes over 793 uids. Measure single-node unlock cost directly (log the S2K iteration count and elapsed time per file across one folder — this also settles the question B12 left open, whether the 49 ms/entry folder is expensive because of n or because the uploading client chose a costlier S2K). Ideal speedup is bounded by core count and by how uneven those per-file costs are.

Step 2 — move the crypto off the async runtime. The decryption currently runs inline in the SDK's enumerate_nodes future. Blocking CPU work on a Tokio worker starves everything else sharing that runtime. Wrap the per-node unlock in spawn_blocking, or hand the whole chunk to a rayon pool and await the result. This is the change PERF #5 describes and is a proton-drive-rs change, not a pdfs one — which is why it was deferred: it needs an SDK release, and the workspace pins "0.1" so a cargo update picks it up.

Step 3 — parallelise across files within a chunk. 150 nodes per chunk, each independent once the parent key is resolved. resolve_parent_key_ctx caches the ancestor key and all children of a folder share one parent, so the parallel region needs read-only access to it — take the folder key once, then fan out. Watch FOLDER_KEY_CACHE_CAP/folder_keys (PERF #9 made it an LRU) for contention if the fan-out takes that lock per node.

Step 4 — re-measure the same three folders, which have before/after numbers already recorded above and in B12:

folder	cold plain `ls`	cold `ls -l` (today)
`Music/aC_ID.dll` (793)	4.58 s	85.8 s
`InstantUpload/Camera` (484)	2.91 s	not measured
`Pictures/old` (417)	2.25 s	not measured

Fill in the middle column's ls -l first — there is only one data point for the regression right now, and B12's "cliff past ~500" framing was wrong precisely because it generalised from a single folder. Do not repeat that mistake here.

What success looks like: cold ls -l on the 793-entry folder within ~2–3× of the plain ls, rather than 19×. Perfect scaling is not available — the request round trips are serial per chunk and only the crypto parallelises.

Explicitly out of scope: readdirplus. It would cut the number of calls (one reply per directory instead of one lookup per entry) and is the right long-term shape for the directory-read path, but it does not remove a single S2K — the sizes still have to be computed. It is a separate change and should not be bundled in, for the same reason B5 declined it: it would hide this bug rather than fix it.

Do not attempt to derive the plaintext size from total_size_on_storage instead. The delta is not a constant (+564 B on a 39 MB file, +51 B on a 16-byte one — it scales with block count), so the arithmetic would have to model Proton's block framing exactly, and being wrong in the small direction reproduces B11, where a short size made the kernel skip reads entirely.

Verify with: the ciphertext delta is the probe (+564 B on a 39 MB file, +51 B on a 16-byte one — it scales with block count, so it is not a constant). pdfs refresh a folder, then ls -l immediately and diff against a settled listing.

B15 — an empty-but-`listed` folder, and duplicated folder uids

Status: Open (side finding, unattributed). Originally filed as "a sync-folder listing came back empty"; that part was investigated and retracted — see below. Found: 2026-07-20, while confirming B13.

ls ~/Music/Buunshin/not everythin is your fault (wav)/ returns total 0 — no entries — even though the rename failures in B13 prove files existed under those names minutes earlier (Proton rejected the rename because the name was taken). The same folder read through the primary mount (~/ProtonDrive/Music/Buunshin/…) lists all seven .wav files correctly.

Checked (2026-07-20) — the "stale empty listing" reading was wrong. The folder not everythin is your fault (wav) that read empty has listed = 0 in nodes, so its ls was a real network enumeration, not a cached empty one. The files genuinely are not there: every rename in B13 failed and rsync discarded its temp files. B15 as originally filed does not exist.

What the query did turn up, and is worth keeping:

A real B1-shaped row. not everything is your fault (no (wav)) reads listed = 1, trashed = 0 with zero child rows — the exact empty-but-listed state B1 was about, still present in the live DB, reached by some route the B1 fix does not cover. This one is worth chasing.
Duplicated folders. Music and Buunshin each exist under two distinct uids, and the (wav) folder name appears twice as well — one copy populated (7 children), one empty. So the remote tree has picked up duplicate directories somewhere. Related to the self-conflict duplication already recorded in memory, but not yet attributed here.

Both are folder-identity problems rather than the mount disagreement originally suspected. Renamed scope accordingly; the "two mounts disagree" framing is retracted.

B16 — aria2c preallocation / rapid sequential writes trigger false self-conflict copies

Status: Fixed (verified 2026-07-21) Found: 2026-07-21, user reported sync conflict files created during torrent downloads with aria2c onto the FUSE mount ([DB]Oshi no Ko 3rd Season_-_05... (sync-conflict 1784644482).mkv). Where: crates/pdfs-fuse/src/lib.rs, crates/pdfs-fuse/src/drain.rs, crates/pdfs-core/src/db/ops.rs

Cause: Tools like aria2c preallocate target file sizes using ftruncate/setattr and then write actual content across multiple file opens or handle releases.

First close (e.g. after preallocation): queued an OP_REVISION with baseline set to the server revision at open time.
If this initial op drained immediately, refresh_after_upload updated the remote node's modification time on the server.
Second write / close (with actual content): if the write handle was opened before the first op drained or if the op drained before the second write released, remote_baseline built a based_on referencing the old server revision.
When the second op drained, revision_conflict compared based_on against the new remote revision mtime, detected a mismatch, and treated it as a remote edit by another device — uploading the local data as a (sync-conflict <ts>) duplicate file.

Fix: A two-part defense:

Revision Debounce (DRAIN_REVISION_DEBOUNCE = 2s): enqueue_staged_write sets next_attempt_at = now + 2s for OP_REVISION ops instead of 0. Rapid follow-up writes supersede the queued op in staging before it ever reaches the network. Added Db::earliest_due_at() and wait_for_drain_work_or_due() so the drain loop sleeps precisely until debounced ops become due.
Open-Handle Rebaselining: refresh_after_upload now updates base_mtime and base_size on any open WriteHandle targeting the same node UID when a revision seals, complementing rebaseline_pending.

Verified: Clean build and 200/200 workspace tests passing.

Residual (2026-07-24): the two-part defense narrowed the window but did not close it — the baseline was still keyed on (mtime, size), which drifts when the server re-stamps the same revision. Reproduced again on a plain application save (test_export.xml): base mtime 1784897777 vs sealed 1784897780, identical size, no other device involved. The root cause is that mtime is not a revision identity. Fixed properly by B69.

B17 — FUSE mount lock contention, missing next_attempt_at in DB enqueue, and ioctl ENOTTY fix

Status: Fixed (verified 2026-07-21) Found: 2026-07-21, deep code audit of fix/ioctl-handler branch. Where: crates/pdfs-fuse/src/lib.rs, crates/pdfs-core/src/db/ops.rs

Cause:

Db::enqueue_op SQL INSERT INTO pending_op statement omitted next_attempt_at from the column list, causing SQLite to set next_attempt_at = 0 and rendering the 2-second revision debounce (DRAIN_REVISION_DEBOUNCE) ineffective.
ioctl returned ENOSYS for non-terminal commands, signaling to kernel FUSE that ioctl calls were unsupported across the mount.
fallocate executed libc::fallocate while holding self.core.state.lock(), blocking all concurrent FUSE operations across the mount during disk block preallocation.
open/create invoked create_scratch() prior to checking st.active_writes, leaking scratch files on disk during concurrent opens.

Fix:

Updated Db::enqueue_op in ops.rs to include next_attempt_at in the INSERT INTO pending_op statement and parameters.
Changed ioctl handler in lib.rs to return Errno::ENOTTY for all unhandled ioctls, conforming to POSIX standards.
Moved libc::fallocate outside the state lock by cloning the Arc<File> reference first, and mapped system OS errors to fuser::Errno.
Refactored open and create to check st.active_writes under lock before invoking create_scratch(), preventing redundant scratch file creation.

Verified: Workspace unit tests (200/200) and clippy passing cleanly.

B18 — Subtree Erasure via POSIX `unlink` / `rmdir` (CRIT-01)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent filesystem safety audit (audit_bugs.md CRIT-01)
Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::unlink, ProtonFs::rmdir

Cause: unlink on directories and rmdir on non-empty directories bypassed POSIX checks and called trash_child directly, silently deleting remote subtrees.

Fix: Added type and non-emptiness checks in lib.rs:

unlink: Returns Errno::EISDIR if target is a folder.
rmdir: Returns Errno::ENOTDIR if target is a file, enumerates a cold directory before deciding whether it is empty, and returns Errno::ENOTEMPTY when it contains children. An absent cache entry is unknown, not empty; without the enumeration Proton's recursive trash operation could erase unseen children.

Verified:

Unit tests: test_posix_unlink_and_rmdir_checks in lib.rs passing cleanly.
Live mount verification on ~/testmount and ~/testmount-2: rm dir returned EISDIR, rmdir file returned ENOTDIR, rmdir non_empty_dir returned ENOTEMPTY, rmdir empty_dir succeeded.

B19 — Remote Folder Trashing on Mode Switch Failure (CRIT-02)

Status: Fixed; all four managed-live mode pairs verified 2026-07-22, fault-injected mount failure still pending Found: 2026-07-21, multi-agent sync engine audit (audit_bugs.md CRIT-02)
Where: crates/pdfs-fuse/src/devices.rs, apply_sync_folder_mode

Cause: The first fix mounted FUSE before calling evict_dir_contents. That made the cleanup walk the newly mounted remote namespace rather than the hidden local mirror, issuing FUSE unlink/rmdir operations which could trash the entire remote folder. The local files were not reclaimed at all.

Fix: Persist ondemand first so reconciliation cannot interpret cleanup as user deletion, evict the underlying local mirror while holding the sync-folder lock, and only then mount FUSE. A mount failure leaves an inert ondemand row; switching back to mirror clears the baseline and restores the local copy.

Verified: cargo clippy -p pdfs-fuse --all-targets -- -D warnings, the pdfs-fuse unit suite, and the complete managed-live matrix passed against the 1.0.0 release binary. A fault-injected mount-failure test is still needed.

B20 — Un-fsynced Temp File Atomic Rename in Content Cache (CRIT-03)

Status: Fixed (verified 2026-07-21)
Found: 2026-07-21, multi-agent storage audit (audit_bugs.md CRIT-03)
Where: crates/pdfs-core/src/cache.rs, ContentCache::store

Cause: Cache store renamed temporary files into the cache directory without explicit fsync. Power loss or ungraceful shutdown could leave 0-byte or corrupted files indexed as valid cache hits.

Fix: Added f.sync_all()? calls on open file handles prior to executing std::fs::rename.

Verified: cargo test -p pdfs-core suite passing cleanly.

B21 — Untracked Hole Punching in `fallocate` (HIGH-01)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent FUSE audit (audit_bugs.md HIGH-01)
Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::fallocate

Cause: FALLOC_FL_PUNCH_HOLE zeroed scratch blocks but removed their WriteHandle::written authored status. Revision assembly therefore classified the punched range as an untouched gap and refilled it from the remote baseline, silently undoing the hole at commit.

Fix: Mark the punched, in-file range as authored after successful local fallocate, so its sparse zero bytes are retained by revision assembly.

Verified:

Live mount verification: libc.fallocate(fd, 0x03, 256, 512) zeroed middle range while preserving edge authored bytes on both ~/testmount and ~/testmount-2.

B22 — Synchronous `block_on` inside Mutex Guard (HIGH-02)

Status: Fixed (unverified under load) 2026-08-16 — the systematic audit this was waiting on has been done and found nothing left. Found: 2026-07-21, multi-agent concurrency audit (audit_bugs.md HIGH-02)
Where: crates/pdfs-fuse/src/lib.rs, sync.rs, devices.rs

Cause: Invoking rt.block_on(...) while holding state.lock() deadlocks worker threads and the main FUSE loop under high concurrency. Most major handlers have been refactored to drop state.lock() before invoking async runtime methods, but a full systematic audit across all background tasks and FUSE callbacks is required to eliminate all instances.

Audit (2026-08-16). All 131 block_on sites in pdfs-fuse were scanned mechanically: for each, every guard binding (self.state() or any .lock()) still lexically live at that point, accounting for explicit drop(..) and scope exits. Two hits, both false positives — devices.rs:570 binds taken, the Option<Mount> taken out of the map (the guard is a temporary, and _guard is explicitly dropped above), and lib.rs:1917/1927 binds resident, a bool read out of a temporary guard. pdfs-core contains no block_on at all. The reverse direction — a guard held across an .await — is covered by clippy::await_holding_lock, which is on in the CI gate.

The scan is lexical, so it cannot see a guard passed into a callee; it is evidence, not proof, which is why this is unverified. What would settle it is the concurrency half of the acceptance suite run against a heavily loaded drain.

B23 — Un-fsynced Scratch Wipe on Daemon Restart (HIGH-03)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent recovery audit (audit_bugs.md HIGH-03)
Where: crates/pdfs-core/src/cache.rs:L741, ContentCache::rescue_scratch

Cause: On daemon startup, rescue_scratch inspected the scratch directory and only preserved files with valid .json sidecars created by fsync. Active writes closed without an explicit fsync lost their sidecars and were deleted during startup directory cleanup.

Fix: Updated rescue_scratch in cache.rs to generate synthetic StagedWrite sidecars for any scratch file with valid data (len > 0) when a sidecar exists but was partially corrupted, preserving offline writes across unclean shutdowns.

Verified: Unit tests fsynced_scratch_survives_reopen_and_unmarked_scratch_does_not and cleared_durability_marker_stops_recovery in cache.rs passing 100%.

B24 — Directory Hierarchy Loop in `rename` (HIGH-04)

Status: Fixed (verified 2026-07-21)
Found: 2026-07-21, multi-agent FUSE audit (audit_bugs.md HIGH-04)
Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::rename, crates/pdfs-fuse/src/state.rs:L237

Cause: Moving a directory into one of its own subdirectories created an infinite recursive loop in inode state memory and DB tree structure.

Fix: Added State::is_ancestor_of helper in state.rs that walks up parent chains. rename checks st.is_ancestor_of(ino, newparent) when moving directories and returns Errno::EINVAL if a cycle would be formed.

Verified:

Unit tests: test_is_ancestor_of_hierarchy in state.rs passing.
Live mount verification: mv parent parent/child returned EINVAL ("Invalid argument") on both mounts.

B25 — Weak Conflict Baseline Detection `(mtime, size)` (HIGH-05)

Status: Fixed and live-verified 2026-08-16 on 1.8.1 — the FUSE-write half was closed by B69; the mirror half is closed here.

Live verification (2026-08-16, ~/pdfs-live-mirror, folder 6). b25.txt was written with mtime 12:00:10.100000000, synced (baseline local_mtime=1786874410, local_mtime_ns=1786874410100000000), then rewritten with sixteen different bytes and stamped 12:00:10.900000000 — identical whole second, identical length. The next pass classified it as locally changed and uploaded b25.txt new version; the baseline advanced to …410900000000, and reading the file back through an on-demand mount of the same folder returned BBBBBBBBBBBBBBBB. Under the old whole-second comparison this edit was invisible.
Found: 2026-07-21, multi-agent sync engine audit (audit_bugs.md HIGH-05)
Where: crates/pdfs-core/src/cache.rs:L157, Baseline

Cause: Conflict resolution baseline detection relies strictly on (mtime, size) tuple comparisons without content hashing or revision IDs. Concurrent edits landing within the same second that produce identical file sizes match baselines, causing offline edits to overwrite remote changes silently without creating (sync-conflict <ts>) copies.

Fix (2026-08-16), part one — the FUSE write path. Closed by B69: Baseline gained revision_id, and revision_changed keys on the server revision id — the true identity, which advances if and only if a new revision was sealed — falling back to (mtime, size) only for a sidecar written before the field existed.

Fix (2026-08-16), part two — the mirror sync path. B69 did not reach it: a mirror folder's baseline is sync_entry, and its local side was still whole seconds. An edit made in the same second as the last sync that left the file the same length — a fixed-size record rewritten in place, an image re-exported, a database page updated — read as unchanged and was never uploaded, leaving the remote silently behind until something else about the file moved.

sync_entry gains local_mtime_ns (schema 28), and the comparison moved into LocalSig::same_content, which uses nanoseconds when both sides have them and whole seconds otherwise. The column is nullable rather than a converted local_mtime * 1e9 on purpose: the sub-second part of an existing baseline is genuinely unknown, and inventing zero for it would make every already-synced file compare as changed and re-upload an entire mirror on first start. NULL means "compare seconds", which is exactly the behaviour that row was written under; each row gains a real value the next time its path syncs.

Covered by db::tests::migration_v28_adds_sub_second_local_times_without_disturbing_a_v27_baseline and sync::planner::file_plan_tests::a_same_second_same_size_edit_is_still_a_local_change.

Still open (deliberately): the remote side of a mirror baseline is still (mtime, size) (remote_rev/remote_hash). Re-keying it onto active_revision_id the way B69 did for the FUSE path is the same idea and the same size of change, but the stored column already holds mtime-shaped strings, and telling an old row from a new one would need a heuristic on the value's shape. That deserves its own column and its own pass rather than a guess.

To verify: on a mirror folder, printf %s aaaa > f && sync && printf %s bbbb > f inside one second, then a reconcile pass — expect an upload, and the remote content to be bbbb.

B26 — Broken Open-Unlinked File Semantics (HIGH-06)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent FUSE audit (audit_bugs.md HIGH-06)
Where: crates/pdfs-fuse/src/lib.rs, crates/pdfs-fuse/src/state.rs

Cause: Unlinking an open file called trash_child, which invalidated the node and dropped it from state immediately. Subsequent read calls on open file handles failed with ENOENT / EIO.

Fix:

Added open_count and unlinked fields to Entry in state.rs.
open increments open_count, release decrements open_count.
forget_or_unlink marks entry.unlinked = true and removes ino from st.children of the parent (so the file disappears from directory listings immediately) while preserving the inode in st.entries.
read calculates optimistic fsize falling back to core.pending length for unlinked/pending files.
Node removal, op cleanup, and cache eviction are safely deferred until release brings open_count to 0.
create now increments the returned inode's open_count, writable-open scratch allocation failure rolls the count back, and the last release of an unlinked writer discards its scratch bytes instead of queueing a resurrection.

Verified: Live mount verification: python script opened file descriptor, unlinked file via rm, verified file disappeared from directory listing, and read full contents from open fd cleanly on ~/testmount and ~/testmount-2.

B27 — Orphaned Write Revision Bricking Offline Sync Queue (HIGH-07)

Status: Fixed in code (unverified create→unlink live sequence, 2026-07-22) Found: 2026-07-21, multi-agent drain engine audit (audit_bugs.md HIGH-07)
Where: crates/pdfs-fuse/src/lib.rs:L1811, crates/pdfs-fuse/src/drain.rs

Cause: Unlinking a newly created offline file discards its Create pending op, but closing an open write handle on the file queued a Write revision for local~....

Fix: In addition to the queue_revision guard, create participates in inode open-lifetime accounting and release explicitly suppresses revision queueing when it retires the last handle of an unlinked inode.

Verified: Code inspection in lib.rs:1811 and workspace tests passing.

B28 — Unhandled Disk Exhaustion (`ENOSPC`) in Cache & Scratch Store (MED-01)

Status: Fixed in code — previous remediation was unsafe (2026-07-22) Found: 2026-07-21, multi-agent storage audit (audit_bugs.md MED-01)
Where: crates/pdfs-core/src/cache.rs, emergency_evict

Cause: Running out of local disk space caused unhandled EIO errors without triggering emergency eviction of unpinned cache blobs.

Fix: Added emergency_evict() to ContentCache which queries cache_eviction_candidates and evicts LRU unpinned blobs immediately to reclaim disk space when ENOSPC occurs.

Verified: cargo test -p pdfs-core suite passing cleanly.

B29 — Missing FUSE `forget` Method / Memory Leak (MED-02)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent FUSE state audit (audit_bugs.md MED-02)
Where: crates/pdfs-fuse/src/lib.rs:L3983, crates/pdfs-fuse/src/state.rs

Cause: Kernel forget messages sent by FUSE were ignored, causing state.entries and state.by_uid maps to grow monotonically in RAM over long daemon uptimes.

Fix: Added lookup_count to Entry and implemented forget_lookup(ino, nlookup) in state.rs. ProtonFs::forget now invokes st.forget_lookup(ino.0, nlookup) to prune unreferenced inodes from memory.

Verified: cargo clippy --workspace --all-targets and cargo test passing with zero warnings.

B30 — SQLite Write Lock & Mutex Contention under Heavy Drain (MED-03)

Status: Fixed (unverified under load) 2026-08-16 — closed by the work filed under the performance audit rather than by a change made for this entry.
Found: 2026-07-21, multi-agent database audit (audit_bugs.md MED-03)
Where: crates/pdfs-core/src/db/ops.rs, crates/pdfs-core/src/db/mod.rs

Cause: Long-running upload drain transactions hold SQLite write locks while worker threads wait for state.lock(), causing periodic FUSE response latency spikes during heavy sync operations.

Audit (2026-08-16). Each of the three mechanisms behind that sentence is gone:

No transaction spans a network call. Every Db method opens its transaction, commits and returns; nothing holds one open across calls (the invariant is stated on Db::read). A drain op's upload happens between database calls, not inside one.
Reads no longer queue behind the writer. The read-only connection pool (Db::read) gives SELECT-only methods their own connections, so a FUSE metadata call does not wait on whatever is committing. Asserted by db::tests::a_read_does_not_wait_for_the_write_connection, which holds the write connection for the whole measurement.
The queue is no longer read whole to pick one op. Db::claim_next_due_op selects and claims a single row in the database, which is what made a long queue quadratic to drain while holding the shared connection.

The state.lock() half is covered from the other side: B75 moved network work off fuser's dispatch thread, and B22's audit found no block_on under a State guard.

Unverified because "periodic latency spikes" is a load property, not a code property: it is closed by construction and wants the concurrency acceptance case under a loaded drain to confirm it in the field.

B31 — Unimplemented Special Files & Attribute Modifications (MED-04)

Status: Not a bug — by design, verified 2026-08-16
Found: 2026-07-21, multi-agent POSIX audit (audit_bugs.md MED-04)
Where: crates/pdfs-fuse/src/lib.rs

Cause: Symlinks (symlink/readlink), hardlinks (link), FIFOs/sockets (mknod), and chmod/chown attribute modifications return ENOSYS or are silently ignored.

Verdict (2026-08-16). Each of these is the correct answer, not a gap, and each errno is now a deliberate choice with a comment saying why:

symlink → EPERM. The operation is meaningful; Drive simply cannot represent it. Callers treat EPERM as a definite "no" instead of retrying against an older interface.
link → EPERM. A node has exactly one parent on Drive, so there are no hard links. git falls back to rename() on EPERM, which this filesystem supports.
mknod → ENOSYS. Devices, FIFOs and sockets have no representation at all. Regular files arrive through create, never here.
chmod/chown/utimes → accepted and ignored, so tools that chmod or restamp after writing succeed rather than failing on a filesystem with no per-file mode to set.

Implementing any of them would mean inventing a local-only representation that no other Proton client can read — a worse outcome than a clean refusal. The errno contract is asserted by the acceptance suite's clean-refusal case so it cannot drift, and B73 removed the per-probe WARN that made these look like incidents in the journal.

B32 — Race Condition in Concurrent Handle Release and Open (MED-05)

Status: Fixed and live-verified 2026-08-16 on 1.8.1

Live verification (2026-08-16). Three 64 MiB random files were written over the same mount path (ProtonDrive/pdfs-live-20260816/b32.bin) back to back, each cp closing before the next began, while the drain was still working. The queue coalesced them into a single op (29 queued = 28 known-stuck + 1). After the drain retired it, pdfs refresh dropped the cached listing and a full re-read from Drive returned 4ad41482f5199a401e425381d7621626 — the md5 of the third write, byte for byte. No open re-used a stale staged base, and the retry warning never had to fire.
Found: 2026-07-21, multi-agent concurrency audit (audit_bugs.md MED-05)
Where: crates/pdfs-fuse/src/lib.rs:L4042, L4574

Cause: Opening a file for writing while a previous handle release is draining creates overlapping scratch write handles and out-of-order remote revision uploads.

Fix (2026-08-16). The concrete hole was in serve_open: it sampled the queued revision (Core::pending), then copied that blob into a fresh scratch file, then took the State lock to install the handle. A release publishing a newer revision anywhere inside that gap — which spans a copy the size of the whole file — left the new handle carrying the older base, and its own release then published content that silently discarded the revision closed a moment earlier.

The install is now guarded: the pending blob path (which changes on every publication, so it identifies the revision) is re-read immediately before the State lock, and if it moved, the scratch file is discarded and the open goes around again — up to OPEN_BASE_ATTEMPTS (3), after which it fails with EIO rather than spinning a FUSE worker. Only a handle the open is about to create is checked; if one already exists, that handle is authoritative and the scratch is discarded regardless.

The re-read is deliberately not taken under the State lock: no site in the daemon holds pending and state at once (the invariant is stated on stamp_pending_sizes) and this is not the place to become the first. What that costs is a residual window of a few instructions instead of a lock-tight comparison; what it removes is the multi-gigabyte window, which is the one that actually loses data.

To verify: the acceptance suite's concurrency case, with a large file, closing and reopening it for write from two processes while the drain is loaded.

B33 — Lack of Partial Transfer Resumption & Head-of-Line Queue Blocking (MED-06)

Status: Fixed (verified 2026-07-22)
Found: 2026-07-21, multi-agent drain engine audit (audit_bugs.md MED-06)
Where: crates/pdfs-fuse/src/drain.rs:L73

Cause: The attempted remediation classified errors by substring and deleted the pending row after five failures or strings containing 402/403/413. There was no quarantine table or export path: the staged blob became unreachable and the in-memory pending view could remain stale. Five transient failures are not proof that accepted user data is disposable.

Fix: Never delete an accepted write on a retry path. Every failure remains a durable pending operation and receives bounded exponential backoff; the indexed next_due_op query skips it until due, so unrelated work is not blocked.

Verified: cargo clippy -p pdfs-fuse --all-targets -- -D warnings and the pdfs-fuse unit suite pass. A durable user-visible quarantine feature may be added later, but it must retain the row and blob.

B34 — Writable POSIX Exposure of Read-Only Shared Folders (MED-07)

Status: Fixed in code by P2/P3 (2026-07-29); P3 now exposes the shared tree, while credentialed second-account and live FUSE acceptance remain pending P7 Found: 2026-07-21, multi-agent permissions audit (audit_bugs.md MED-07)
Where: crates/pdfs-fuse/src/lib.rs, crates/pdfs-fuse/src/sharing.rs

Cause: Shared "Viewer" (read-only) folders are exposed via POSIX with write permissions (0755). Local writes succeed initially on the mount but fail perpetually during background online drain with 403 Forbidden errors.

Fix: P2 persists share authority in schema V17 share_access, inherits it through resident entries, exposes read-only POSIX modes, and gates mutations at handler, queue, and drain boundaries. Downgrades fail closed and are not acknowledged past failed durable state updates.

Verification: The local workspace passes formatting, locked checks, clippy with warnings denied, and all 347 workspace tests, including P3 virtual-tree materialization and access inheritance plus mutation gating, queued-operation authorization, and downgrade failure paths. Credentialed second-account and live FUSE acceptance have not been run and remain required in P7.

B35 — IPC Unix Socket Creation Permission Race (MED-08)

Status: Fixed (verified 2026-07-20 - see B6)
Found: 2026-07-21, multi-agent security audit (audit_bugs.md MED-08)
Where: crates/pdfs-fuse/src/control.rs, crates/pdfs-core/src/config.rs

Cause: Binding the domain socket before setting chmod(0600) created a race window where local users could connect before permissions were enforced.

Fix: Fixed via B6 remediation: AppDirs::ensure sets 0700 permissions on config, state, and cache directories, and config::restrict_socket applies 0600 immediately after binding control and tray sockets.

B36 — Unicode Normalization Discrepancy (NFC vs NFD) (LOW-01)

Status: Open (verified 2026-08-16, deliberately not fixed)
Found: 2026-07-21, multi-agent sync audit (audit_bugs.md LOW-01)
Where: crates/pdfs-fuse/src/lib.rs, crates/pdfs-fuse/src/sync.rs

Cause: macOS/HFS+ NFD UTF-8 path inputs differ from Linux NFC UTF-8 paths, causing duplicate folder creation or lookup misses for accented filenames.

Verified (2026-08-16), not fixed. The claim is accurate: names are compared as bytes throughout — the mirror engine's rel paths, by_uid/children interning, and the planner's classification union — so café written by a Proton client on macOS or iOS (NFD) and café written here (NFC) are two different paths, and a mirror folder holding both would sync both.

Not fixed here on purpose. A normalizing comparison changes what "the same file" means across the whole daemon, and it changes it in the unsafe direction: two names that are genuinely distinct on the remote would start colliding locally, and a collision in the sync engine is a deletion or an overwrite, not a warning. Doing it properly means a normalization dependency, a decision about which form is canonical on the wire, and a migration for baselines keyed on the other form — its own change with its own acceptance case, not a line in a sweep. Left LOW because it needs cross-platform authorship of the same accented name to bite at all.

B37 — Failed Remote Trash Removed the Local Dentry (CRIT-04)

Status: Fixed in code (unverified on a live mount, 2026-07-22) Found: 2026-07-22, deep FUSE/POSIX audit Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::trash_child

Cause: trash_child called forget_or_unlink before the online trash_nodes request. If Drive rejected or failed the request, FUSE returned EIO but the path had already disappeared from local state.

Fix: Queue or complete the remote mutation first and remove the local dentry only after that step succeeds. Offline deletion still becomes immediately visible, but only after its durable queue row exists.

B38 — Sync Task Panic Could Authorize Destructive Mode Switch (HIGH-08)

Status: Fixed in code (2026-07-22) Found: 2026-07-22, sync concurrency audit Where: crates/pdfs-fuse/src/sync.rs, Core::flush_batch

Cause: A JoinSet task panic was logged but not added to Outcome.errors. The pass could therefore be recorded as idle/successful even though an upload or download never ran, allowing a pending on-demand switch to evict local data.

Fix: Count every join failure as a reconciliation error, which prevents the pass from being treated as successfully settled.

B39 — Sync Download Can Overwrite a Concurrent Local Edit (HIGH-09)

Status: Fixed and live-verified 2026-08-16 on 1.8.1

Live verification (2026-08-16). Folder 6 was switched to on-demand (evicting its local copies) and then back to mirror, which queues a download of the 128 MiB b40.bin. Three seconds into that download, RACING-LOCAL-EDIT-B39 was written to the destination path. The pass logged

WARN pdfs_fuse::sync: sync: local file changed while downloading; keeping it as a conflict copy
  path=/home/narl/pdfs-live-mirror/b40.bin expected=None
  actual=Some(LocalSig { mtime: 1786916720, mtime_ns: Some(1786916720414151922), size: 21 })

and finished with the remote copy at b40.bin and the racing 21 bytes intact at b40 (sync-conflict 1786916794).bin — which the following pass then uploaded as a file of its own. Before the fix the rename would have destroyed those bytes with no trace.

Found: 2026-07-22, sync concurrency audit Where: crates/pdfs-fuse/src/sync.rs, download classification and apply path

Cause: Reconciliation classifies a local file from an earlier scan, downloads to a temporary file, then renames over the destination without revalidating that the local inode/content stayed unchanged. A writer racing the download can have its completed edit silently replaced.

Required fix/test: Capture a local identity/signature during planning and revalidate immediately before rename. Preserve a conflict copy on mismatch. A deterministic test should pause the download, edit the target, resume it, and verify that neither version is lost.

Fix (2026-08-16). Pending::Download now carries local: Option<LocalSig> — what the planning walk actually saw at that path, or None for nothing there — and download_file calls keep_racing_local_edit in the last moment before the rename that publishes the download. A destination that no longer matches the plan is moved aside by preserve_conflict_copy first, so the racing bytes survive and re-upload as a new file on the next pass: the same resolution a both-sides-changed conflict already gets. A path that is empty when something was expected is not a conflict — the download is about to recreate it and there is nothing to preserve.

Pending::Conflict passes None deliberately: it has just moved the local copy aside itself, so the state its download expects to find is "nothing", and anything that appears while it runs is a new racing write that gets its own copy.

Covered by sync::tests::a_download_keeps_a_local_edit_it_did_not_plan_for (unchanged destination overwritten silently; changed destination preserved). Unverified against a real timing race — the deterministic pause-mid-download test the entry asks for is not in place; the unit test drives the guard directly instead.

B40 — Sync Upload Can Stream Torn Live Content (HIGH-10)

Status: Fixed and live-verified 2026-08-16 on 1.8.1

Live verification (2026-08-16). A 128 MiB b40.bin was dropped into folder 6 and a pass forced; six seconds into the upload, sixteen bytes were overwritten at offset 100,000,000. The pass logged

WARN pdfs_fuse::sync: sync: file changed while uploading; the remote revision may be torn and
  will be replaced on the next pass rel="b40.bin"
  streamed=LocalSig { mtime: 1786916599, mtime_ns: Some(1786916599336211782), size: 134217728 }
  now=Some(LocalSig { mtime: 1786916605, mtime_ns: Some(1786916605686365985), size: 134217728 })

and — this is the part that matters — recorded the baseline against the streamed signature (…599), not the file on disk. The very next pass therefore read the file as locally changed and uploaded b40.bin new version. Round-tripping the folder through on-demand and back later downloaded the remote copy at md5 cfb45003003fb2ad50c2c365f8313849 — the post-mutation local content, exactly. The torn revision healed itself without anyone asking.

Found: 2026-07-22, sync concurrency audit Where: crates/pdfs-fuse/src/sync.rs, upload apply and baseline update

Cause: Planning stats a path, but upload later opens and streams the live file. A concurrent writer can change or truncate it during transfer, producing a torn remote revision. Baseline settlement may then stat still newer local bytes and falsely declare them synchronized.

Required fix/test: Upload an immutable staged snapshot, or validate an open descriptor before and after streaming and refuse baseline settlement on change.

Fix (2026-08-16). The second option, and the correction is structural rather than a check. record_file_baseline no longer stats the path when it is done; it is given the identity the transferred content corresponds to, and both upload paths pass the LocalSig taken from the descriptor they streamed. So a file that changed mid-stream records a baseline describing the bytes that went up, not the bytes on disk now — which makes the very next pass classify the path as locally changed and upload a whole, clean revision over the torn one. The old behaviour stated the opposite: it declared the torn revision synchronized and left it as the file's content on Drive.

warn_if_torn compares before and after purely so the journal explains the extra revision; the correction does not depend on it. Downloads are unaffected — there the file on disk is the transferred content, published by a rename and stamped, so its stat is the identity.

Note the pre-existing mitigation this backs up: the /proc/*/fd scan already defers any file held open for writing (FilePlan::Deferred), so this covers the residual — a writer that opens, writes and closes entirely inside one upload.

To verify: upload a large file from a mirror folder while appending to it, then check that the following pass uploads a new revision and the final remote content matches the local file.

B41 — Sync Folder Removal Races Active Reconciliation (HIGH-11)

Status: Fixed (verified by inspection) 2026-08-16 — already correct in the code by the time this was revisited Found: 2026-07-22, sync lifecycle audit Where: crates/pdfs-fuse/src/devices.rs, remove_sync_folder

Cause: Folder removal does not acquire the per-folder sync_lock used by a reconcile pass. It can unmount, delete configuration/baselines, or trash the remote root while in-flight tasks continue uploading, downloading, and writing baseline state.

Required fix/test: Serialize removal with reconciliation, cancel/disable the folder, await active work, then unmount and remove durable state.

Audit (2026-08-16). Core::remove_sync_folder opens by taking self.sync_lock(id) and holds it across the whole removal, and reconcile_pass takes the same lock for the whole pass — so a removal requested mid-pass blocks until that pass finishes, which is the serialization this asked for. The ordering inside the lock is also the one specified: unmount the on-demand session first (before trashing the remote tree it serves, which would otherwise leave it answering for deleted nodes), then drop the row.

The one step outside the lock is the remote trash, and that is safe by construction rather than by accident: the row is already gone, and reconcile_pass re-reads sync_folder_get under the lock and returns when it finds nothing, so no pass can start against a folder being removed. The mode re-check on that same re-read is what makes this hold for a switch racing a removal too.

No code change. Recorded as verified-by-inspection: a live removal during an active pass has not been driven.

B42 — Local Delete Failure Is Recorded as Sync Success (HIGH-12)

Status: Fixed (unverified) 2026-08-16. Found: 2026-07-22, sync error-path audit Where: crates/pdfs-fuse/src/sync.rs, local file/directory deletion branches

Cause: Some local removal errors are ignored while the baseline is removed and success is logged. The surviving path becomes a new untracked item on the next pass and can resurrect content that was deleted remotely.

Required fix/test: Treat ENOENT as success; for every other removal error, retain the baseline and increment Outcome.errors.

Fix (2026-08-16). The error half was already in place by the time this was revisited: both FilePlan::DeleteLocal and the deferred folder removals log the failure, increment outcome.errors and continue without touching sync_entry_remove, so the baseline survives and the survivor is not mistaken for a new local file next pass.

The ENOENT half was not, and it failed the opposite way: a path that was already gone was counted as an error and kept its baseline, so the same removal was retried and re-reported on every pass forever. Both call sites now go through removed_locally, which reads NotFound as the state the engine was asking for. Covered by sync::tests::an_already_absent_path_counts_as_removed. Unverified because no live sync pass has been driven over an externally-deleted file yet.

Live verification attempted 2026-08-16, blocked. Driving this needs the remote side of a mirror folder to lose a file, and a mirror folder's remote lives in the device share, which no mountpoint exposes — pdfs rm only accepts paths under a mountpoint, and the obvious workaround (switch the folder to on-demand, trash the file through its own mount, switch back) runs into B86: the on-demand mount serves a listing that predates the mirror engine's uploads, so the file to be trashed is not visible to rm at all. Verifying B42 live therefore needs either a second client on the account or B86 fixed first. The ENOENT branch remains covered only by its unit test.

B43 — FUSE Directory Cookies Are Not Stable (MED-09)

Status: Fixed and live-verified 2026-08-16 on 1.8.1

Live verification (2026-08-16). A probe opened ProtonDrive/pdfs-live-20260816 (12 files) and called getdents64 with a 160-byte buffer, so the kernel had to page through the listing; between every page it created a new file in the directory and unlinked an older one. Three pages, 14 entries returned (12 + . + ..), zero duplicates, zero pre-existing entries missed — and none of the files created mid-enumeration appeared, which is the frozen snapshot behaving as specified. The same probe against the pre-fix index-cookie readdir is what this entry was written about.

Found: 2026-07-22, FUSE/POSIX audit Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::serve_readdir

Cause: readdir rebuilds a live vector for every call and uses its array index as the continuation cookie. A namespace mutation between pages can shift indexes and cause entries to be skipped or repeated.

Required fix/test: Implement opendir/releasedir snapshots keyed by the directory handle, or assign stable per-entry cookies. Test with deliberately small reply pages and mutation between calls.

Fix (2026-08-16). The first option. opendir is now implemented: it enumerates the folder if it is cold, freezes the listing, and publishes it under a fresh fh in State::dir_snapshots; readdir serves from that snapshot; releasedir drops it. The kernel pairs each opendir with exactly one releasedir, so the snapshot lives exactly as long as the enumeration it belongs to, and a create or a trash landing between two pages can no longer shift the indexes the continuation cookie is expressed in.

The fh comes from the same State::next_fh counter write handles use, so a directory handle can never collide with a file handle. Serving from the snapshot is a pure in-memory walk with no chance of a remote call, so readdir no longer needs a worker at all; the live path (serve_readdir) stays as a fallback for a handle that has no snapshot, and both build their listing through the same build_listing so they cannot disagree.

Enumeration cost is unchanged — it moved from the first readdir to opendir, one call earlier — and a folder that cannot be enumerated now fails at opendir, where the caller can still act on the errno.

To verify: the acceptance suite with deliberately small reply pages, creating and trashing entries between getdents calls, asserting no entry is skipped or repeated.

B44 — FUSE Background Workers Have No Coordinated Shutdown (MED-10)

Status: Fixed and live-verified 2026-08-16 on 1.8.1

Live verification (2026-08-16). systemctl --user restart proton-drive.service on a daemon with six live mounts, a busy drain and 18.4 GiB staged: stop to Stopped took 110 ms, the journal shows the six unmounts followed by sync engine stopping and daemon stopping, and systemd never reached its SIGKILL timeout. The old PID was gone immediately, and the fresh daemon settled at 42 threads — the same count the outgoing one had, so no loop was left behind or spawned twice. A second restart mid-session behaved identically.

Found: 2026-07-22, daemon lifecycle audit Where: crates/pdfs-fuse/src/mount.rs, mount lifecycle; drain/index/sync loops

Cause: Long-lived threads and tasks retain Core clones but share no cancellation token or owned join set. Unmount removes the session/socket without stopping and joining every worker, so in-process remounts can leak workers and continue DB/client activity after teardown.

Required fix/test: Add shared cancellation, interruptible waits, owned join handles, and ordered shutdown. Repeated mount/unmount tests should return thread counts to baseline and observe no post-unmount DB work.

Fix (2026-08-16). All four, in crates/pdfs-fuse/src/shutdown.rs plus the loops:

Shared cancellation. Shutdown — a flag and a condvar, set once and never cleared — lives on Core, so every clone a worker was given carries it.
Interruptible waits. Every loop that called thread::sleep in a loop {} with no exit now calls Shutdown::sleep, which returns false the moment teardown starts: the conflict sweep (warmup and interval), the online probe, the local indexer, and both sync poll threads. The drain workers check between ops — never inside one, so an op is always either retired or released — and the sync engine gained a SyncMsg::Stop that ends its loop and abandons any burst it was settling.
Owned join handles. run_mount collects every long-lived thread it starts into one workers vec.
Ordered shutdown. stop_workers sets the flag, wakes the two waits that need waking — the drain's own condvar via wake_drain, and the control listener, which blocks inside accept and is woken by a connection from us before the socket is unlinked — then joins them all. It runs after the mounts are down, because nothing a worker can still do is harmful at that point, and it also runs on the startup-failure path, which abandons the mount just as completely.

A join that takes a while is expected and correct: a drain worker part-way through an upload finishes it rather than abandoning the user's bytes mid-flight.

Covered by shutdown::tests (a stop cuts an hour-long wait short; an already-stopped signal does not wait at all). Unverified for the property that motivated the entry — repeated in-process mount/unmount returning thread counts to baseline — which wants the acceptance suite.

B45 — Truncate After a Queued Rewrite Corrupts or Returns EIO

Status: Fixed and live-verified (2026-07-22) Found by: scripts/fuse-acceptance.sh Where: crates/pdfs-fuse/src/filesystem.rs, write-open scratch setup; crates/pdfs-fuse/src/lib.rs, Core::queue_truncate

Repro: Write a file, immediately replace its contents, then run truncate -s 4 file before the queued replacement drains. Reading it returned four NUL bytes instead of the first four replacement bytes.

The expanded managed suite found the path-based variant: create and close a 10-byte file, then immediately call truncate(path, 4). The close's complete revision was still inside the two-second drain debounce. queue_truncate described the shrink as an incomplete edit over the remote base, noticed the pending edit, preserved an orphan staging file, and returned EIO.

Cause: A new write handle always treated the server revision as its base. When a newer complete revision was still queued locally, the handle's scratch file began sparse and zero-filled. Shrinking it preserved those scratch zeros, not the prefix of the locally authoritative queued revision.

Fix: A write opened over a complete queued revision seeds its scratch file from that staged blob and marks the copied range authored. Stacking a write over an incomplete queued revision is refused rather than guessed. Path-based truncate now composes the same way: it copies a complete pending blob, applies the new length, marks the result complete, and inherits the last real remote baseline. Live acceptance verified shrink, zero-filled growth, and sparse I/O.

B46 — Combined Cross-Directory Move and Rename Can Fail Out of Date

Status: Fixed and live-verified (2026-07-22) Found by: scripts/fuse-acceptance.sh Where: crates/pdfs-fuse/src/filesystem.rs, ProtonFs::rename

Repro: mv source victim, replacing an existing file, followed immediately by mv victim dir/moved. Proton accepted the move half of the second operation, then rejected its rename half with InvalidRequirements (HTTP 422, "out of date"), surfaced as EIO.

Cause: Moving changes the node's encrypted-name requirements. The following link-details read can briefly observe the pre-move state, so the new name is signed against stale requirements.

Fix history: A bounded retry of InvalidRequirements reduced the window but did not close it; the managed matrix reproduced the same failure after all four retries. Combined cross-directory move+rename now enters the durable rename queue as a desired end state. Its drain re-fetches the node on every attempt, skips either half that already landed, renames before moving, and resolves name collisions without losing the source. Simple rename-only and move-only calls remain synchronous. The managed live suite subsequently passed the replacement and combined move/rename cases.

Follow-up (2026-09-15, unverified): With SDK 0.6.3 the drain sends the move and the rename as one move-multiple request carrying the target name, instead of renaming in the source folder and then moving. That removes the second call the stale requirements could hit, and the SDK retries a remaining InvalidRequirements once with the server's current name hash. A destination name collision now moves under a conflict name in one step. Same-folder renames are unchanged. The synchronous FUSE rename path (serve_rename) still renames then moves with its bounded retry and has not been converted. Needs a managed live run of the combined move/rename cases.

B47 — FUSE Accepts Path Components Longer Than NAME_MAX

Status: Fixed and managed-live verified (2026-07-22) Found: 2026-07-22, managed FUSE acceptance suite Where: crates/pdfs-fuse/src/filesystem.rs, name-taking callbacks

Repro: open(<mount>/<256 ASCII bytes>, O_CREAT) succeeded. A conventional Linux filesystem must reject a pathname component longer than 255 bytes with ENAMETOOLONG.

Cause: Every callback converted OsStr with to_string_lossy and passed it straight to Drive. This imposed neither Linux's component limit nor Drive's UTF-8 requirement, and could silently change non-UTF-8 names.

Fix: Route lookup, create, mkdir, unlink, rmdir, and both rename components through one validator. It enforces the 255-byte limit, rejects reserved/empty components, rejects invalid UTF-8 with EILSEQ, and preserves valid Unicode. The managed live suite is the verification gate.

T1 — Managed Acceptance Raced Daemon Startup

Status: Fixed (2026-07-22) Found: repeated install/restart/acceptance loop Where: scripts/fuse-acceptance.py, managed setup

Repro: Run systemctl --user restart proton-drive.service and immediately start --managed-live. The offline reference completed before the daemon had recreated its control socket, so the first pdfs --json sync list failed with ENOENT and setup aborted.

Fix: Managed validation polls the supported sync list API until the daemon is ready or PDFS_ACCEPTANCE_SYNC_TIMEOUT expires. This is tracked as a test harness defect rather than an application bug.

T2 — Acceptance Cleanup Raced Queued Namespace Replay

Status: Fixed (2026-07-22) Found: managed on-demand/on-demand matrix after every functional test passed Where: scripts/fuse-acceptance.py, per-contract cleanup

Repro: A combined move+rename was correctly accepted into the durable queue. Cleanup started recursively deleting its test tree while the rename drain was still landing. The moved entry appeared in dir-b after rmtree enumerated it but before rmdir(dir-b), producing ENOTEMPTY.

Fix: Before cleanup, poll pdfs --json status until both pending counters are zero. Retry rmtree only for ENOTEMPTY inside the uniquely owned test root, then wait for the queued deletions before changing modes. Other errors are still immediate failures.

T3 — Mode-Matrix Preservation Check Raced Mirror Restoration

Status: Fixed (2026-07-22) Found: managed on-demand/on-demand → on-demand/mirror transition Where: scripts/fuse-acceptance.py, managed mode switching

Repro: Switch a populated managed folder from ondemand to mirror, wait until sync list reports mirror/idle, and immediately read a preservation file. The file can still be absent even though the subsequent restore pass downloads it correctly.

Cause: The application commits the new mode before scheduling reconciliation and leaves the previous idle state and sync timestamp in the row. Those values describe the completed on-demand state, not a completed mirror restoration.

Fix: The harness records every transition to mirror and explicitly requests and waits for a newer completed sync pass before validating local bytes. This is tracked as a harness synchronization defect; transient absence before that pass is expected asynchronous behavior, not data loss.

T4 — Successful Managed Cleanup Left Its Own Sentinel Behind

Status: Fixed (2026-07-22) Found: second consecutive managed acceptance run Where: scripts/fuse-acceptance.py, managed cleanup

Repro: Complete the mode matrix in mirror/mirror, then immediately start a new managed run. Registration cleanup removed the sync-folder records and remote test folders, but the next run's empty-directory precheck found the harness's 128 KiB preservation sentinel in each local directory.

Cause: Removing a mirror registration intentionally preserves the local copy. The harness treated unregistering as if it also emptied local storage.

Fix: After successful unregister, cleanup deletes only the sentinel whose contents match the per-run bytes generated by this harness. Unknown files remain untouched and continue to fail the strict precheck.

B48 — Successful Unlink Can Reappear From a Stale Remote Listing

Status: Fixed (unverified) Found: 2026-07-22, managed acceptance cleanup after all on-demand I/O passed Where: crates/pdfs-fuse/src/lib.rs, child enumeration and trash paths

Repro: Unlink every child of a directory and immediately remove the directory. unlink returned success, but a parent invalidation followed by an eventually consistent remote enumeration returned the just-trashed child again. rmdir then returned ENOTEMPTY; repeated recursive removal could reproduce it for the entire acceptance timeout.

Cause: Three stale-data paths combined. A queued cross-directory rename updated State but did not invalidate the kernel's cached empty destination listing, so recursive walkers never saw or unlinked the moved child. Removing a node recorded no authoritative local tombstone, so an eventually consistent Drive listing could intern it again. Separately, State::has_children treated a resident empty listing as inconclusive and fell back to obsolete SQLite child rows. Thus readdir could report empty while rmdir returned ENOTEMPTY forever.

Fix: Every successful online or queued trash records its uid in a session-shared hidden set. Both persisted and remote child enumeration filter that set. Secondary on-demand mounts share it, and an explicit restore removes the uid so restored content can appear normally. has_children now treats any resident listing—including an empty one—as authoritative and consults SQLite only when the listing is absent. After replying successfully to a queued rename, the FUSE handler invalidates both exact dentries and both directory inodes; the ordering matters because an invalidation sent before the rename reply is overwritten by the kernel's response processing. Uids are immutable and never reused, making a session-long tombstone safe.

B49 — Failed Conflict Preservation Still Overwrites the Local File (CRIT-05)

Status: Fixed, with the injected-failure suite the entry asked for (2026-08-17). Only the end-to-end live conflict remains unexercised. Found: 2026-07-22, 1.0 data-safety audit Where: crates/pdfs-fuse/src/sync.rs, download/conflict handling

Cause: If renaming a concurrently changed local file to a conflict copy fails, sync only logs the error and continues publishing the remote download over the local version. Second-resolution conflict names can also collide.

Required fix/test: Abort download publication unless preservation succeeds; use collision-resistant names. Test existing names, permissions, ENOSPC, EIO, and cross-filesystem behavior. This is B39's failure path; B25 remains the separate weak-baseline problem.

Verification (2026-08-17). preserve_conflict_copy was already correct — it copies to a create_new destination, syncs data and directory, and removes the source last, so every failure returns Err and apply_one never reaches the download. What was missing was proof, so: conflict_preservation_failures_all_keep_the_local_file drives an unwritable directory (EACCES), a source that vanished between planning and preservation (ENOENT), and a destination name already taken by a directory — and asserts the local file is still there, byte-identical, after each. a_conflict_copy_is_byte_and_mtime_identical covers the other half: the copy carries the bytes, mtime and mode, so the next pass uploads the user's version rather than something that looks freshly written. The existing collision test covers the suffix search.

Not covered: a genuine ENOSPC or EIO from the storage layer, and the end-to-end live conflict.

B50 — Failed Orphan Staging Deletes the Sole Scratch Copy (CRIT-06)

Status: Fixed, with injected filesystem-failure verification (2026-08-17). Found: 2026-07-22, 1.0 data-safety audit Where: crates/pdfs-fuse/src/lib.rs, Core::stage_orphaned_write

Cause: If preserving an orphaned scratch write into staging fails, the failure path removes the original even though no other durable copy exists.

Required fix/test: Never unlink the source until a durable replacement and metadata are committed. Inject ENOSPC, EIO, EROFS, permission, and cross-device failures and assert a byte-identical copy remains discoverable. Related: B23, B27, and B28.

Verification (2026-08-17). Four new tests in pdfs-core/src/cache.rs. orphan_preservation_keeps_the_scratch_copy_when_staging_is_unwritable makes staging mode 0500 so both the rename and the copy fallback fail, and asserts the scratch file survives byte-identical, is the path the error names, and carries its recovery marker. a_retained_orphan_write_is_discoverable_after_a_restart reopens the cache after that failure and asserts recovered_writes finds the bytes with their metadata — present is not the same as discoverable, and discoverable is what the entry asked for. orphan_preservation_across_a_device_boundary_publishes_before_removing and a_failed_cross_device_preservation_keeps_the_marked_source drive the copy fallback across a real device boundary (/dev/shm vs /tmp), asserting the ordering — destination and sidecar published and synced first, source removed last — and that a publication which does not finish leaves the marked source in place. The cross-device pair skips with a printed note on a machine that has only one filesystem, rather than passing silently.

Not covered: a genuine ENOSPC/EIO from the block layer; EROFS is approximated by the unwritable-directory case rather than a read-only mount.

B51 — Scratch Sidecar Does Not Establish a Durable Recovery Record (CRIT-07)

Status: Fixed, with crash-boundary and corrupt-sidecar verification (2026-08-17). True power-loss testing (a machine actually losing power mid-write) is still not covered. Found: 2026-07-22, 1.0 crash-consistency audit Where: crates/pdfs-core/src/cache.rs, scratch durability markers

Cause: A temporary sidecar is renamed without syncing the sidecar first or the directory afterward. Power loss after successful user fsync can preserve bytes but lose authored-range metadata; recovery may discard the write or treat a sparse partial write as complete and replace untouched ranges with zeros.

Required fix/test: Sync data, write and sync temporary metadata, rename it, then sync the directory before acknowledging durability. Crash-test every boundary and corrupt/partial sidecars. B20 and B23 do not cover this invariant.

Verification (2026-08-17). a_half_written_scratch_sidecar_is_never_read_as_a_record puts on disk exactly what a crash inside mark_scratch_durable leaves — a .json.tmp and no published sidecar — and asserts the next open recovers nothing from it, so an unpublished temporary can never be replayed as a write. a_corrupt_scratch_sidecar_still_rescues_its_bytes truncates a published sidecar to a JSON prefix and asserts the blob is still moved to recovery/ unaccompanied: metadata loss must not take the user's bytes with it. remarking_a_scratch_file_replaces_its_record_atomically covers the repeated-fsync case — each call leaves one complete parseable record and no debris.

Not covered: real power loss. Nothing short of a crashing VM tests that, and the entry should not be closed as if it did.

B52 — Staged-Write Publication Is Not Crash-Safe (CRIT-08)

Status: Fixed, with cross-filesystem verification against a real device boundary (2026-08-17). True power-loss testing is still not covered. Found: 2026-07-22, 1.0 crash-consistency audit Where: crates/pdfs-core/src/cache.rs, staged-write publication

Cause: Rename/copy and direct sidecar writes lack a complete sync protocol. The cross-filesystem fallback can remove its source after an unsynced copy, leaving no complete data/metadata pair after a crash.

Required fix/test: Publish synced temporary data and metadata via atomic renames and directory syncs; delete the source only after verification. Inject failure after every write, sync, rename, DB enqueue, and deletion. Related: B50 and B51.

Verification (2026-08-17). stage_write gained a stage_write_at seam — the public entry point picks a timestamped destination, which is right for production and impossible to arrange a failure at, the same reason preserve_write_at exists. staging_across_a_device_boundary_removes_the_source_last drives the copy path across a real device boundary and asserts the destination and sidecar are both on disk before the source goes. a_failed_staging_sidecar_keeps_the_cross_device_source blocks the sidecar's temporary name and asserts the source survives — a staged blob nothing describes is not a substitute for the bytes. an_unaccompanied_staged_blob_survives_a_restart asserts startup leaves an undescribed staging blob (and a leftover .json.tmp) alone rather than tidying user data away.

Not covered: real power loss, and injected failure at every one of the listed points — the sidecar and source-removal boundaries are covered, the intermediate fsync calls are not.

B53 — Superseding a Pending Operation Is Not Transactional (CRIT-09)

Status: Fixed, with rollback, restart and full-database verification (2026-08-17). Found: 2026-07-22, 1.0 SQLite durability audit Where: crates/pdfs-core/src/db/ops.rs, Db::enqueue_op

Cause: The old durable row is deleted before its replacement is inserted, outside a transaction. A crash, constraint error, full disk, or I/O failure can erase acknowledged upload work and orphan its blob.

Required fix/test: Select and replace in one transaction; retain the old blob until commit and make cleanup recoverable. Inject insert/commit failures and prove that old or new operation—never neither—remains queued. B27 concerns a retained failing row; this issue erases the row.

Verification (2026-08-17). The existing failed_superseding_insert_keeps_the_old_pending_op proves the row rolls back. Two tests were added for the parts that make the rollback usable. a_rolled_back_supersede_keeps_its_blob_and_survives_reopen asserts the failed call does not report the old blob as superseded — that value is the caller's instruction to delete those bytes, and the row that owns them is still queued — and that the rollback is still there after closing and reopening a file-backed database, so it is not an artefact of the connection that failed. a_full_database_rolls_the_supersede_back_rather_than_erasing_it caps max_page_count at the current size, which is the same SQLITE_FULL an out-of-space filesystem produces, and asserts the acknowledged upload is still queued and still owns its bytes.

B54 — Total-Wipe Guard Does Not Protect a One-Entry Baseline (CRIT-10)

Status: Fixed, with one-entry, absent-root, unreadable-root and replaced-mountpoint regressions (2026-08-17). The live mode matrix is still the only thing unexercised. Found: 2026-07-22, 1.0 mirror-sync audit Where: crates/pdfs-fuse/src/sync/planner.rs

Cause: The safeguard activates only when the baseline has at least two paths. A one-file local folder that is missing, unreadable, or wrongly mounted can therefore trash its sole remote file.

Required fix/test: Protect every non-empty baseline and require an independently complete scan plus an explicit deliberate-delete signal for a total wipe. Test absent roots, replaced mountpoints, permissions, and one-file folders in every mode combination.

Verification (2026-08-17). The guard reads !baseline.is_empty(), so every non-empty baseline is protected; guard_local_wipe_blocks_only_a_total_disappearance already carried the one-entry case. The "independently complete scan" half is B55's fix — an absent, unreadable or partially readable root now fails the pass before the guard is reached, which those tests cover.

What was missing is the case where nothing fails: a root that is readable but is no longer the tree it was, an empty directory left where a mount used to be. a_replaced_mountpoint_trips_the_guard_at_every_baseline_size walks a real empty root, confirms the scan honestly reports nothing, and asserts the guard fires for baselines of one, two and three paths — then that it steps aside the moment the tree is back, so a remounted folder resumes instead of staying wedged.

Deliberate divergence from the required fix: there is no explicit deliberate-delete signal. The guard refuses a total wipe outright rather than offering a way to confirm one. That is stricter than asked for, and it means a user who really did delete everything must remove and re-add the sync folder. Worth revisiting if anyone hits it; not worth building a confirmation path nobody has asked for yet.

Not covered: the live mode matrix (scripts/fuse-acceptance.sh --managed-live).

B55 — Incomplete Local Scans Are Interpreted as Deletions (CRIT-11)

Status: Fixed, with injected iterator/stat failure tests (2026-08-17). Found: 2026-07-22, 1.0 mirror-sync audit Where: crates/pdfs-fuse/src/sync.rs, local scan/reconciliation

Cause: Directory-entry and metadata errors omit paths instead of marking the snapshot incomplete. Reconciliation can treat omissions as intentional local deletions and propagate them remotely.

Required fix/test: Carry completeness/errors into planning; an incomplete subtree must make the pass non-destructive and retain its prior baseline. Test readdir, stat, permission, transient-I/O, and disappearing-entry failures. B42 covers the inverse local-delete failure.

Verification (2026-08-17). The scan body was lifted out of Core::walk_local into a free walk_local_tree, so it can be driven against a real tree with a real unreadable directory in it and no Core at all. Every failure in it is fatal to the pass by construction — a read_dir that fails, an entry that cannot be stat-ed, a name that is not UTF-8 — because a skipped path is a path reconciliation reads as a deletion and propagates to Drive.

Tests: an_unreadable_subdirectory_fails_the_scan_instead_of_shrinking_it (chmod 000 on a subdirectory holding a file, asserting the error names the subtree), an_unreadable_root_fails_the_scan, an_absent_root_fails_the_scan (the unmounted-device case), a_non_utf8_name_fails_the_scan, and a_readable_tree_scans_completely as the complement — the strictness must not cost a working pass, so a healthy tree still reports every entry and still skips symlinks by design.

Not covered: transient I/O errors, and an entry that disappears between read_dir and stat. Both are races that would need a filesystem shim to force; the code path they take is the same symlink_metadata failure the permission test drives.

B56 — Database Schema Version Parsing Fails Open (HIGH-13)

Status: Partly fixed — future schemas are refused; malformed-version handling remains open Found: 2026-07-22, 1.0 database audit Where: crates/pdfs-core/src/db/migrations.rs, Db::migrate

Cause: Missing, malformed, or non-numeric version values become zero, while all future versions are accepted. Corruption can replay migrations, and an older binary can open a newer incompatible database.

Required fix/test: Distinguish a new DB from corrupt metadata; reject malformed/future versions without mutation and validate required schema. Test empty, malformed, negative, future, partial/interrupted migration, and upgrade fixtures from every released schema.

B57 — Event Cursor Can Advance Past Unapplied State (HIGH-14)

Status: Partly fixed — cursor now advances per successfully invalidated event; DB/apply fault tests remain Found: 2026-07-22, 1.0 event-recovery audit Where: crates/pdfs-fuse/src/background.rs, run_event_sync

Cause: Cache invalidation failures are ignored while the batch cursor still advances. Cursor-persistence failure also leaves the in-memory cursor moving; first-seed persistence failure can later reseed at a newer head. Applying state and committing its cursor have no atomic relationship.

Required fix/test: Apply idempotently and persist derived DB state plus the cursor atomically, or advance only through the last durable event. Retry failed prerequisites. Crash/fault-test every event and cursor boundary, first seed, duplicate replay, malformed events, and database-full conditions.

B58 — Control Socket Has Unbounded Frames and Connections (HIGH-15)

Status: Fixed in code with frame-limit regressions; connection-flood verification pending Found: 2026-07-22, 1.0 IPC audit Where: crates/pdfs-fuse/src/control.rs

Cause: The server uses unbounded read_line, a new thread per connection, and no concurrency or idle limit. A local process can exhaust memory, file descriptors, and threads, blocking filesystem control and safe shutdown.

Required fix/test: Bound frames, clients, and idle lifetime. Test slow/no- newline clients, oversized/truncated JSON, floods, and recovery. B6/B35 cover socket authority and permissions, not resource bounds.

B59 — Private State Permission Enforcement Fails Open (HIGH-16)

Status: Fixed in code with symlink regression; wrong-owner integration verification pending Found: 2026-07-22, 1.0 local-privacy audit Where: crates/pdfs-core/src/config.rs, AppDirs::ensure

Cause: chmod/creation failures are warned about or ignored while decrypted content, plaintext metadata, and the authenticated socket may remain accessible to other local users.

Required fix/test: Before loading credentials or serving data, verify every sensitive directory is owned by the effective user, is not a symlink, and is owner-only. Test wrong owner, symlink substitution, read-only filesystems, permissive restored directories, and chmod failure. This tightens B6/B35.

B60 — Config Writes Are Non-Atomic and Parse Errors Are Overwritten (HIGH-17)

Status: Fixed in code; fault/concurrent-save verification pending Found: 2026-07-22, 1.0 configuration audit Where: crates/pdfs-core/src/config.rs, load_config / save_config

Cause: Save truncates in place without sync. Load treats read/parse failure as absence and best-effort overwrites with defaults, silently losing mountpoint, ignore policy, budget, and explicit device adoption.

Required fix/test: Atomically publish a restricted, synced temporary file and sync its directory. Preserve malformed input and report an actionable error. Test invalid/truncated JSON, permissions, ENOSPC, crash points, and concurrent saves.

B61 — Rotated Single-Use Credentials Can Be Lost (HIGH-18)

Status: Open — 1.0 authentication/recovery blocker Found: 2026-07-22, 1.0 authentication audit Where: crates/pdfs-core/src/auth.rs, refresh callback

Cause: Failure to serialize or persist rotated credentials is only logged (and some setup failures are silent). The daemon continues in memory while the keyring retains an invalid single-use refresh token, so restart loses login.

Required fix/test: Expose unhealthy persistence, retry with bounded backoff, notify the user, and define a safe re-login/shutdown path. Test locked/full/ unavailable keyrings, callback races, repeated rotations, death, and restart.

B62 — Debian Artifact Omits Required Service and Autostart Units (HIGH-19)

Status: Fixed in workflow; clean-install VM verification pending Found: 2026-07-22, 1.0 packaging audit Where: .github/workflows/release.yml; packaging/

Cause: The generated package omits proton-drive.service and the tray autostart entry even though normal login/GUI flows assume that lifecycle.

Required fix/test: Package all units/resources with correct paths, modes, and hooks. In clean supported-distribution VMs test install, login, reboot, daemon/tray/FUSE, upgrade, rollback, and uninstall without deleting user state.

B63 — Release Version Identity Is Inconsistent and Unenforced (HIGH-20)

Status: Partly fixed — tag/workspace/PKGBUILD equality is enforced; protocol identity remains Found: 2026-07-22, 1.0 release audit Where: manifests, client identity constants, tags, release workflow

Cause: Workspace/binary versions, protocol identity strings, and tags can disagree; the workflow trusts any v* tag without checking package metadata or installed --version output.

Required fix/test: Establish one version source and fail CI on every tag, manifest, package, and binary mismatch. Document any intentionally independent protocol identity.

B64 — Stable Publishing Lacks Data-Safety and Recovery Gates (CRIT-12)

Status: Partly fixed — automated gates and managed-live matrix pass; recovery approval remains open Found: 2026-07-22, 1.0 release audit Where: CI and .github/workflows/release.yml

Cause: A tag can publish without required format/lint/tests, offline and dedicated-account live acceptance, migrations, or crash/recovery drills. Fixes still marked unverified can ship as stable.

Required fix/test: Publish immutable RC artifacts only after all workspace checks, full managed mode matrix, migration/power-loss recovery, clean install/ upgrade tests, and explicit sign-off for every critical/high integrity issue.

B65 — Release Artifacts Lack Supply-Chain Verification (MED-11)

Status: Open — 1.0 release/security blocker Found: 2026-07-22, 1.0 supply-chain audit Where: CI and release workflows

Cause: Releases do not enforce advisory/license policy or publish signed provenance, SBOMs, and verifiable checksums for exact distributed artifacts.

Required fix/test: Add locked audit/license gates, SBOM and provenance, checksums and signatures, documented verification, and an independent clean-job verification/install test.

B66 — Local-Only Pending Data Is Not Protected at Shutdown (HIGH-21)

Status: Open — 1.0 data-safety/UX blocker Found: 2026-07-22, 1.0 recovery audit Where: shutdown, CLI/GUI status, logout/unregister workflows

Cause: Undrained writes may exist only on one machine, but there is no flush command with a completion contract, prominent pending byte/count health, or shutdown/logout warning/inhibition.

Required fix/test: Add pdfs sync flush, expose pending operations/bytes and last errors, and protect destructive lifecycle actions. Test offline stop, logout, unregister, reboot, retry exhaustion, and drain. Credential removal must never delete staged bytes.

B67 — Fresh-State Restore Can Silently Select a New Device (HIGH-22)

Status: Open — 1.0 recovery blocker Found: 2026-07-22, 1.0 disaster-recovery audit Where: device discovery/adoption; docs/RECOVERY.md

Cause: Restore depends on hostname and folder basename. After local-state loss, a mismatch can silently create/select another device rather than attach the intended remote roots, making recovery appear complete while data is absent.

Required fix/test: Require explicit adoption/confirmation on ambiguity and show old/proposed device and root IDs. Test state loss, hostname change, duplicates, renamed folders, multiple devices, and byte-identical restoration.

B68 — Profile Backup Cannot Be Written to the Device Root

Status: Partly fixed — the destination is fixed and verified live (2026-07-31, see B78); backup health is still invisible in the UI and the replacement-machine restore has not been re-run Found: complete managed-live mode matrix against the 1.0.0 release binary Where: crates/pdfs-fuse/src/profile.rs, profile backup destination

Repro: Every sync-folder registration or mode transition attempted the profile backup and received NotEnoughPermissions (HTTP 422): Cannot create file at the root of a device. The filesystem matrix itself passed, but profile backup never became durable remotely.

Impact: The recovery feature appears active but does not preserve the device profile, so a replacement machine still lacks modes, pins, mount settings, and the explicit remote-folder mapping. Repeated retries also add noisy warnings.

Required fix/test: Store the profile below a writable application folder rather than directly at the device root, reuse that folder by stable identity, and make backup health visible. Verify upload, replacement, restart restore, and byte-identical fresh-state recovery on a dedicated account.

B69 — Spurious `(sync-conflict)` copies from mtime-keyed revision identity (B16/B25 root fix)

Status: Fixed — offline-tested 2026-07-25, live-validated 2026-07-26 (see below) Found: 2026-07-24, user reported test_export (sync-conflict 1784898786).xml created after a normal save from an application into the on-demand mount. A full-mount scan turned up ~156 conflict copies; 151 were byte-identical to their live sibling. Where: crates/pdfs-fuse/src/{drain,filesystem,lib,state,sweep,sync,sync/planner}.rs, crates/pdfs-core/src/cache.rs, crates/pdfs-core/src/control.rs; SDK proton-drive-rs node.rs/client.rs/public_link.rs.

Cause: Two independent false-positive sources, both from (mtime, size) being used as a revision identity (the weakness B25 flagged; the recurrence B16 could not fully close):

Re-stamped mtime. revision_conflict compared the queued write's baseline mtime against the remote's. The server stamps a sealed revision with its own commit time (…780), a few seconds off the optimistic time the client baselined at (…777). Same bytes, same size, drifted mtime → the drain diverted the write into a conflict copy of its own base.
First-sync of pre-existing files. plan_file classified (local, remote, no-baseline) as Conflict, so the first reconcile of a folder cut a conflict copy of every file that already existed identically on both sides — the ~151-file storm, all in one ~40s window.

Fix: Make conflict detection key on the server revision id, the true identity (it advances iff a new revision was sealed):

SDK exposes active_revision_id and content_sha1 (plaintext SHA-1 from the revision's decrypted XAttr) on NodeKind::File — both already on the wire / already decrypted, no extra round trips.
Baseline gains revision_id, captured at write-open (WriteHandle.base_revision_id) and carried across supersede/rebaseline like the mtime. revision_changed (extracted, pure, unit-tested) trusts the id when both sides have it and only falls back to (mtime, size) for an old sidecar. A re-stamped mtime on the same id is no longer a conflict; a same-size edit by another device (new id) still is.
Planner adds FilePlan::AdoptBaseline: a no-baseline pair of equal size is recorded into the baseline instead of conflicted. Divergent sizes stay a real conflict.
Auto-sweep (sweep.rs, pdfs-conflict-sweep thread, 5-min cadence): removes conflict copies proven identical to their live sibling (equal size and equal content_sha1, trashing the copy remotely) and surfaces divergent/orphaned ones once as a new ActivityKind::Conflict entry. Never removes a copy it cannot prove is a duplicate.

Verified: proton-sdk-rs 50/61 lib tests + clippy clean; client cargo fmt/clippy -D warnings/cargo test --workspace --locked all green (258 tests, incl. new revision_changed, planner AdoptBaseline, and conflict_base_name cases). The 151 identical copies were removed manually during triage; the 5 divergent ones are left for the user.

Live validation (2026-07-26): 1.1.0 installed over the production account (6 FUSE mounts of real data), daemon restarted, sweep observed across its warmup pass and a full 5-minute interval. Pre-run snapshot: exactly 2 (sync-conflict) copies left on the account, both divergent in size and content_sha1, so the correct behaviour was to remove nothing. Result: nothing removed — the conflict manifest was byte-identical before and after, the activity feed gained zero auto-removed duplicate entries, and the copies were flagged differs from … as intended. (The 40 trash entries in the feed for that window are trashed from the mount — a previous FUSE-acceptance run's queued cleanup ops replaying through the drain, unrelated to the sweep.) The sweep's removal path therefore remains unexercised against a real account; it is now report-only by default (B71) precisely so that stays true until there is field evidence.

Shipping note (resolved 2026-07-25): the client's revision-id/sha1 use depends on new SDK surface (proton-sdk/proton-drive-rs 0.2.2). That version is now published to crates.io; the client's workspace deps were bumped "0.2" → "0.2.2", the Cargo.lock re-resolved to the registry crates, and the local [patch.crates-io] shim removed. No local patch remains. (Live validation of the fix against a real account is still pending.)

B70 — Browser in-flight temp files uploaded and conflict-forked on the on-demand mount

Status: Layers A + B fixed in-tree 2026-07-25 — live-validated 2026-07-26. Validation was blocked until B74 was fixed (its scenario ends in a rename, which B74 made read back as empty); with that out of the way the acceptance case regression B70: transient download name is not sealed passes live. Found: triaging the divergent conflict copies B69 left behind. In ~/Downloads (an on-demand mount) the complete files had been forked into (sync-conflict) copies while their truncated partials kept the canonical name — e.g. teamspeak.tar.gz (30 MB partial live vs a 3.77 GB conflict copy) and nils.zip (17 MB vs 3.18 GB). The conflict copies were byte-exact to the user's independent gdrive backups, proving the conflict copy was the finished download and the live file the stub. The smoking gun: four Unconfirmed NNNNN (sync-conflict …).crdownload copies — Brave's in-flight temp files, forked mid-download. User confirmed the trigger: downloading with Brave directly into the on-demand folder, where a stall

"resume" is routine. Where: on-demand write path — crates/pdfs-fuse/src/filesystem.rs release (queue_revision, ~line 780) and rename (~line 933); drain seal in crates/pdfs-fuse/src/drain.rs. The existing ignore system (crates/pdfs-core/src/syncignore.rs, DEFAULT_IGNORE_PATTERNS) is wired only into mirror reconcile (sync.rs), so it never sees on-demand writes.

Cause: A browser downloading into the mount writes a growing temp file (*.crdownload, or *.part for Firefox) and, on a stall, closes the fd. release hands every closed write to queue_revision, so a partial revision gets sealed as the canonical file. On resume the browser reopens and rewrites the full file; its baseline revision has moved (the client sealed the partial itself), so the drain diverts the finished bytes into a (sync-conflict) copy. Net: the stub wins the name, the real file is exiled to a conflict copy, and every abandoned .crdownload is uploaded as its own multi-hundred-MB node. Unlike B69 this is a genuine two-revision divergence, so B69's revision-id detection correctly refuses to auto-sweep it — the fix has to stop the fork from happening, not reconcile it after.

Fix — two layers, both without an SDK release (A stops transient names ever sealing; B stops a single-writer resume forking against its own seal):

A — transient names never seal a revision until finalized (done 2026-07-25). A new syncignore::is_transient_name recognises browser download temps (*.crdownload/*.part/*.partial/*.download), generic scratch (*.tmp/*.temp), editor swap/backup (*.swp/*.swx/*~), and office/lock files (.~lock.*, ~$*). On create (filesystem.rs) a transient name is kept purely local — no empty remote node is minted — and its queued create is parked: next_attempt_at is set to the new PARK_UNTIL sentinel so Db::next_due_op never selects it. Written bytes still ride on that create via the existing attach_blob_to_create, whose next_attempt_at reset now preserves a park (SQL CASE … >= PARK_UNTIL), so a growing download attaches revision after revision without ever waking the drain. The finalize rename (foo.crdownload → foo) goes through the existing is_local_uid branch (rewrite_op_target renames the queued create); when the old name was transient and the new one is not, it calls Db::set_create_hold(uid, false) and wakes the drain, so the completed file uploads exactly once. Net: no partial and no abandoned temp ever reaches Drive, and nothing forks. Reuses the whole create/attach/rename/drain pipeline — the only new surface is the predicate, the PARK_UNTIL sentinel, set_create_hold, a hold arg on queue_local_node, and the attach-preserves-park CASE. Tests: syncignore predicate cases + db::a_parked_transient_create_stays_off_the_drain_until_finalized. No SDK dependency.
- Not yet covered by A: apps that write the final name in place with no temp suffix (rare), and Firefox multi-connection .part files that it may rename per-segment — those still rely on B. An abandoned transient file (a cancelled download left on disk) now stays local-only forever rather than polluting Drive; a later janitor could reclaim its staged blob.
B — don't self-conflict a single-writer sequential rewrite (done 2026-07-25, no SDK dep). The safety net for names A does not recognise (an app writing the final name in place, Firefox per-segment .part renames, or any resume the in-memory rebase machinery missed). The daemon now records the server revision id it itself seals per node (Core.own_sealed_revs, written in refresh_after_upload where the sealed node is already fetched, dropped on trash). When a queued write drains and revision_changed fires, Core::revision_conflict checks whether the remote sits at one of our own sealed revisions (pure is_own_self_supersede): if so, no other device touched the file — it is a single-writer stall→resume — so it chains (supersedes) instead of forking a (sync-conflict) copy. Gated on meta.complete: an incomplete blob's gaps still refer to the stale base, so it keeps the non-destructive conflict-copy path. This is a superset guard over the existing refresh_after_upload/rebaseline_pending rebasers, which only fire while a handle/op is live; B catches the windows they miss (fresh open during the earlier upload's flight, a stale inherited baseline). Tests: is_own_self_supersede cases in drain.rs. Residual: the map is in-memory only, so a daemon restart between the partial seal and the resume drops the record and that one write can still fork — narrow, and B69's revision-id keying already covers the mtime-drift half. A persisted own-seal ledger would close it.

Triage of the copies already made is done (2026-07-25): all completed files were promoted back to their canonical names (metadata-only rename, no re-upload) and the abandoned .crdownload stubs trashed.

B71 — Conflict sweep is not production-ready (auto-trash loop, CRIT-13)

Status: Blockers 1–4 fixed in-tree 2026-07-26; items 5–10 and the remaining cleanup still open. The sweep is safe to leave running (it is report-only by default and cannot trash anything until explicitly switched to enforce). Where: crates/pdfs-fuse/src/sweep.rs, spawn site crates/pdfs-fuse/src/mount.rs, config surface crates/pdfs-core/src/config.rs.

The B69 fix (see above) shipped a pdfs-conflict-sweep thread that trashes user files on the real Drive from a background loop. The identity check itself is conservative (equal size and equal content_sha1, missing digest treated as divergent), but the machinery around it is not yet safe to run unattended. Review found the following, ordered by severity. Each is a separate defect; they are grouped because they gate the same feature.

Blockers (all fixed 2026-07-26 — the sweep may not trash anything without them):

Data-loss race — trash-then-discard (CRIT). remove_conflict_copy (sweep.rs:137-155) trashes the node remotely and then calls discard_queued_ops(uid), which deletes the node's queued ops and discards their staged blobs (lib.rs:1544-1553). The decision was made from the load_all() snapshot taken at sweep.rs:77, with network round trips in between. A user edit landing in that window is destroyed — the queued write is dropped and its staged bytes, which may be the only copy, are discarded. This violates the invariant that staging/ is never purged. Fix: re-read the node from the DB and re-verify active_revision_id immediately before trashing; skip the node outright if Core.pending or the op table has any entry for it; never let the sweep discard staged bytes.
No kill-switch (CRIT). mount.rs:234-239 spawns the loop unconditionally. There is no AppConfig field and no environment override, so the only way to stop a destructive background loop is to uninstall. Fix: add AppConfig.conflict_sweep: Option<bool> (same Option idiom as cache_budget / ignore_patterns), a PDFS_CONFLICT_SWEEP=off override for support, and a Settings toggle.
Open handles ignored (HIGH). Nothing checks for a live file handle before forget_or_unlink + evict_reader, so the sweep can trash a node a reader currently has open. Fix: skip nodes with open handles.
Enforcing on day one (HIGH, process). The sweep exists because B69 proved the previous revision-identity check was wrong; betting deletion on the replacement check in the same release, with no field evidence, is the wrong order. Fix: ship report-only (log would-trash plus the existing ActivityKind::Conflict), collect a release cycle of real logs, then flip to enforcing.

Fix for 1–4 (landed 2026-07-26):

SweepMode (pdfs-core/src/config.rs) — Off / Report / Enforce, serialised into AppConfig.conflict_sweep (#[serde(default)], so configs predating the field still load). Default is Report, which is blocker 4: an existing install that has never heard of the setting cannot get the enforcing behaviour on upgrade. AppConfig::resolved_conflict_sweep layers PDFS_CONFLICT_SWEEP over the stored value; the precedence is a pure resolve_sweep_mode(env, stored) so it is testable without mutating process state. An unparseable value falls through to the config rather than guessing a mode in either direction.
Spawn gate (mount.rs) — SweepMode::Off skips the thread entirely rather than starting an idle one, so the setting is verifiable from outside the process (ls /proc/<pid>/task/*/comm). Both branches log the resolved mode at startup. mount grew past clippy's argument limit, so username + sweep_mode moved into a MountOptions struct resolved by the caller — mount still reads neither config nor environment.
Interlocks (sweep.rs::duplicate_still_removable) — re-checks, immediately before the destructive call, everything the pass decided from its stale snapshot: no queued op (new Db::has_any_op, a cheap COUNT — a queued op means bytes are owed an upload and discard_queued_ops would throw away the staged blob holding them), no open write handle or shared scratch file (Core::is_busy, checking active_writes + handles under one State lock), and the node still at the same revision id, size, digest, name, parent and untrashed state. Any doubt — including a failed DB read — means leave it alone: a copy that survives to the next pass costs nothing, a wrongly removed one costs data. This is blockers 1 and 3.
Testability — the decision moved into a pure decide(node, sibling, base, mode) -> SweepAction, the same extraction used for revision_changed and is_own_self_supersede; everything that can fail or race stays in the caller. Tests now cover removal-when-enforcing, report-mode-never-removes, size-differs, digest-differs, missing-digest in both directions, and orphaned copies. Gate: cargo fmt / clippy -D warnings clean, cargo test --workspace 282 passed (was 270).

Should fix:

load_all() every pass (MED). Each 300 s pass pulls the entire node table into a Vec<StoredNode> and builds a full (parent, name) HashMap. Fix: query only conflict-named rows (name LIKE '% (sync-conflict %') and look up siblings per parent — O(conflicts), not O(drive).
No batching or per-pass cap (MED). The B69 incident produced 151 copies; that is 151 sequential trash_nodes calls in one pass with no cap and no backoff. trash_nodes takes a slice — batch it and cap per pass.
online sampled once per pass (MED). Read at sweep.rs:100, ahead of a loop that does network I/O; going offline mid-pass yields a long run of failing calls. Fix: bail on the first transport error.
Ambiguous sibling index (MED). by_parent_name.insert (sweep.rs:97) is last-write-wins, so with duplicate (parent, name) rows the surviving entry depends on load_all row order. Fix: make the choice deterministic or skip ambiguous parents.
Trashed ancestors (LOW). A copy under a trashed folder finds no live sibling and is flagged "orphaned", spamming the activity feed. Fix: skip nodes with a trashed ancestor.
SHA-1 provenance unverified (MED). is_identical (sweep.rs:181) compares digests without asserting they belong to the current active_revision_id. A stale XAttr digest from an earlier revision plus a size collision would delete real data. (The missing digest case is already handled correctly.)

Also required to close:

Tests. The policy is now covered via the pure decide (see above). Still untested are the interlocks, which need a Core: pending-op→skip, open-handle→skip, revision-moved→skip, offline→skip. Those want a test harness that can build a Core against a temp DB and a stub client.
conflict_notified is unbounded. HashSet<NodeUid> that only grows except on trash (sweep.rs:157,170).
Docs. docs/ARCHITECTURE.md thread map does not list pdfs-conflict-sweep; docs/RECOVERY.md needs a "the sweep trashed a file, recover it from Proton trash" path.

Mitigating context from the 2026-07-26 pre-run snapshot: the account had only 2 conflict copies left, both divergent in size and content_sha1, so the correct behaviour for the first live pass is to trash nothing.

B72 — `pdfs trash` never returns

Status: Hardened in-tree 2026-07-26 — the hang is gone by construction; the underlying slowness of the first refresh is still unmeasured (live-pending). Found: capturing a trash baseline before the B69/B70 live validation. pdfs trash produced no output and was still running when killed at 120 s. Daemon was healthy and every other CLI call (pdfs sync list, pdfs --version) returned promptly. Where: Core::list_trash (crates/pdfs-fuse/src/lib.rs). Not the CLI: the client's 120 s READ_TIMEOUT (pdfs-core/src/control.rs) is what ends the call, and the daemon never writes a response line.

Root cause. The trash of this account had never been fetched successfully — trash table empty, no trash_synced_ms in sync_state. list_trash therefore always took its "never fetched → rt.block_on(refresh_trash())" branch, which:

materialized the entire trash in one enumerate_nodes call (one S2K unlock per node) before persisting anything, so nothing was ever saved and no later request could be served from the DB;
had no single-flight guard on that branch (only spawn_trash_refresh did), so every attempt started another full refresh;
was never cancelled when the requester timed out, because the control handler sits in block_on on its own thread and nothing signals it.

So each look at the trash added a permanent, full-cost refresh to the daemon. Measured on the live daemon after a handful of GUI/CLI attempts: 11 stale pdfs-control threads, RSS 2.9 GB. Concurrent with a drain backlog that was uploading conflict copies continuously (1991 Conflict activity rows, multi-GB uploads), none of the refreshes ever finished.

Fix (in-tree). list_trash never blocks on the whole refresh: it kicks the single-flighted background refresh, waits at most TRASH_FIRST_WAIT (20 s, well under the front-end read timeout) on a Notify, and answers with whatever has materialized. refresh_trash now materializes in TRASH_MATERIALIZE_CHUNK (150) batches, persisting the cumulative listing after each one, and logs the uid count plus per-batch and total elapsed at INFO/DEBUG — previously the whole path was silent, which is why the stall could not be located from the journal.

Still open: why one refresh is slow enough to matter. The new INFO lines (trash refresh: enumerated / batch / done) answer that on the next run: whether enumerate_trash_node_uids returns at all, how many nodes the trash holds, and the per-batch cost. If the count is large, materializing with enumerate_nodes_light (skips the per-file node-key S2K; size would fall back to on-storage size) is the next lever.

Impact: the trash listing is the user's recovery path after any destructive operation, including the B71 sweep. It needs to work before the sweep is allowed to trash anything.

B73 — Unimplemented FUSE handlers log a WARN per probe

Status: Fixed in-tree 2026-07-26 — live-validated. Found 2026-07-26 by the expanded acceptance suite. Found: scripts/fuse-acceptance.sh --live step "unsupported operations refuse cleanly". Each probe produced a multi-line fuser warning in the daemon journal:

WARN fuser: [Not Implemented] symlink(parent: INodeNo(0x2d), link_name: "symlink", target: "link-target")
WARN fuser: [Not Implemented] link(ino: INodeNo(0x94), newparent: INodeNo(0x2d), newname: "hardlink")
WARN fuser: [Not Implemented] mknod(parent: INodeNo(0x2d), name: "fifo", mode: 4516, umask: 0x12, rdev: 0)
WARN fuser: [Not Implemented] setxattr(ino: INodeNo(0x91), name: "user.pdfs.probe", flags: 0x0, position: 0)
WARN fuser: [Not Implemented] lseek(ino: INodeNo(0x93), fh: 0, offset: 0, whence: 3)

Cause: ProtonFs does not implement these callbacks, so fuser's default trait method answers ENOSYS and logs at WARN. The refusal is correct — the acceptance suite accepts every one of them as a clean refusal — but the logging is not conditional on anything the user did wrong. Impact: cosmetic, but these are not exotic calls: git probes symlinks, cp -a probes hard links, tar and cp --sparse probe SEEK_HOLE/SEEK_DATA (whence: 3 above is SEEK_DATA), and any xattr-aware tool probes setxattr. Warnings that look like faults bury real ones and make both --journal-check and manual triage noisier. Measured across two full acceptance runs against one daemon lifetime (PID 887441, mount never remounted):

op	warnings	behaviour
`link`	11	repeats on every call
`symlink`	4	repeats on every call
`mknod`	2	repeats on every call
`setxattr`	1	kernel cached the `ENOSYS`; never asked again
`lseek`	1	cached
`copy_file_range`	1	cached
`fsyncdir`	1	cached

So the FUSE kernel module remembers ENOSYS for the file-level operations and stops issuing them for the lifetime of the mount, but not for the namespace operations, which are re-issued forever.

link leads for a sharper reason than "tools probe it": git uses link() to place every loose object, falling back to rename() when it fails. In one workloads run, 9 of 10 link warnings carried a 38-hex-character name — the .git/objects/ab/<38 hex> layout — from just 3 commits over 3 files. The volume is therefore proportional to work done, not a fixed startup cost: a git clone of a real repository emits one multi-line warning per object. The lone symlink that is not the acceptance probe is git's core.symlinks detection at git init (a random name pointing at testing).

That moves this from cosmetic to a genuine operational problem: ordinary use of git inside a mount can bury every other log line.

Fix (applied): all seven callbacks are now implemented explicitly in crates/pdfs-fuse/src/filesystem.rs, each answering with the same errno fuser's default would and nothing else — no WARN. Following ioctl (which already used this pattern and says why in its comment), the errno contract is unchanged, so the acceptance suite's clean-refusal assertions hold byte for byte:

op	errno	why that one
`symlink`, `link`	`EPERM`	meaningful operation, unrepresentable on Drive; git falls back to `rename()`
`mknod`	`ENOSYS`	no devices/FIFOs/sockets; regular files arrive via `create`
`setxattr`	`ENOSYS`	surfaces as `EOPNOTSUPP`; reads stay implemented for the thumbnail interface
`fsyncdir`	`ENOSYS`	kernel absorbs it and reports success; dir changes are already durable in SQLite
`lseek`, `copy_file_range`	`ENOSYS`	must stay `ENOSYS` — it is what makes the kernel emulate `SEEK_HOLE`/`SEEK_DATA` and coreutils fall back to read/write instead of failing

Only the three namespace ops were strictly required (the other four silence themselves once the kernel caches ENOSYS), but implementing all seven keeps the refusal explicit and documented at the call site rather than inherited.

Verified: full live acceptance run after the fix — 19 pass / 1 skip, the capability diff identical to the pre-fix run, and 0 Not Implemented lines in the journal across the whole run (was 17, 10 of them link). Regression cover: the acceptance suite's clean-refusal probes assert the errno contract; they pass unchanged.

B74 — A drained create never reaches a sync-folder mount's inode space, so the file reads as empty

Status: Fixed in-tree 2026-07-26 — live-validated. Found 2026-07-26 by the expanded acceptance suite (regression B70 case), then isolated to a broader trigger. Impact: on a sync folder mount (not ~/ProtonDrive), a file whose create was still queued reads back as 0 bytes for as long as the daemon runs, even though the bytes are on Drive intact. This is the write-to-temp-then-rename pattern used by every browser download, most editor saves, rsync, and git.

Not data loss. An earlier revision of this entry called it permanent data loss; that was wrong and is corrected here. The uploaded revision is complete and correct: for every "lost" file the node row carried the right size and active_revision_state: "Active", and a daemon restart made all of them read back with the expected sha256. Nothing had to be recovered. The defect was entirely local and entirely in the read path.

Reproduction (on an on-demand mount, per file: write, close, rename, wait for pdfs status to report the queue drained, then read back):

scenario	result
plain name, never renamed	content intact
plain name, renamed after close	0 bytes until restart
`.crdownload`, renamed after close	0 bytes until restart
`.crdownload`, never renamed	content intact
already-settled file, renamed	content intact
any of the above, after a daemon restart	content intact

The gap between close() and rename() does not matter — 0 s, 2 s and 20 s all behave the same. The boundary is not timing but state: the affected node is one whose create op was still queued, on a mount that is not the primary one.

Root cause — one drain thread, many inode spaces. The daemon mounts ~/ProtonDrive plus one FUSE session per ondemand sync folder. Each of those is a Core::fork_state clone with its own State — its own entries, by_uid, children, next_ino — while sharing db, cache, pending and client. There is exactly one pdfs-drain thread in the process, owned by the primary mount, and it serves the whole shared pending_op table.

So when a create queued by a sync-folder mount lands, the drain calls adopt_real_uid — which looked only at self.state, the primary mount's inode space. The fork's entry keeps its local~… placeholder uid forever. And Core::read_range (crates/pdfs-fuse/src/reads.rs:314) short-circuits a local uid to an empty vec:

if is_local_uid(uid) { return Ok(Vec::new()); }

which is why the read is silent, instant, and zero-length. A restart rebuilds every state from the DB, where remap_local_uid had already written the real uid, so the file reads correctly from then on.

Confirmed live: read handler uid=local~1785067300752-0 fsize=140000 three seconds after pending create landed, and at the same moment adopt_real_uid … hit=None strays=[] — the primary state had no entry for the uid at all. /proc/<pid>/task/*/comm showed 1 pdfs-drain against 8 fuser sessions.

Fix: Core gained a states: Arc<StateRegistry> — a Vec of weakly-held mounts that every mount publishes itself into (Core::register_state, called from mount.rs for the primary and from fork_state for each fork), plus Core::for_each_state, which walks every live inode space one lock at a time. A uid is unique across mounts, so at most one state matches and the rest are no-ops. Five drain sites were converted: adopt_real_uid, adopt_drained_name, the conflict-copy invalidate_listing, the active_writes baseline rebase in refresh_after_upload, and that function's closing intern.

It was completely silent. No ERROR, no WARN, no failed op, no conflict copy, no retry — pdfs status reported the queue drained, because it had. Any diagnosis that relies on the journal or on queue state will not see this.

Regression cover: scripts/fuse-acceptance.py, case regression B74: rename after close keeps its content — the narrowest form (plain names, no overwrite, no transient suffix). It failed in two consecutive live runs before the fix and passes after it. The pre-existing B70 case failed on the same cause and now passes too.

Audit of the rest of the daemon. Every background-thread state.lock() was reviewed for the same shape. The rule that came out of it: a uid is unique across mounts, so uid-keyed work must be broadcast; an inode number is only meaningful to the mount that minted it, so inode-keyed work must not be. What changed:

file	site	why
`background.rs`	`apply_event`	the read-side twin of this bug — remote deletes, trashes and renames only ever reached the primary mount's tree
`sweep.rs`	conflict-copy `forget_or_unlink`	a conflict copy inside a sync folder lives in that fork's inode space
`sweep.rs`	`is_busy`	answered "idle" for every file open on a fork, letting the sweep delete one with a writer attached
`sharing.rs`	`rel_path_for_uid`	a share of a node in a sync folder could not be named
`drain.rs`	`node_place`	fell through to a DB lookup for fork-resident nodes
`lib.rs`	`queue_trash`, `rename`, `remove_replaced` (×2), `drop_local`, `restore`	uid-keyed `forget`/invalidate

Deliberately left on self.state: upload.rs (parent_ino/pino are inode numbers), the size-upgrade path in lib.rs, and drain.rs's root_uid, which is correctly primary-only. The 38 filesystem.rs sites are FUSE callbacks — they already run on the right mount's session thread. parent_is_gone never touches state at all; an earlier note here saying it did was wrong.

The registry is now a StateRegistry type with a unit test (state_registry_walks_every_live_mount_and_reaps_the_rest) covering the case this bug was: a fork that fails to appear in the walk, or one that lingers after unmount.

One regression came out of the audit, and is fixed. Broadcasting apply_event's parent-listing invalidation meant forks started receiving invalidations they had never received — and it invalidated a folder once per event, while a burst of our own uploads produces one event per file all naming the same folder. Every following lookup in that folder then re-enumerated it from the API: quadratic in the folder's size.

Two mitigations, both in background.rs. A batch is collapsed to one invalidation per folder — apply_event records the parent in DirtyParents and flush_dirty_parents publishes it once after the batch loop (every break path falls through to it). And a change the daemon made itself is recognised as its own echo rather than treated as foreign: the drain records it (Core::note_self_change, consumed once within SELF_CHANGE_TTL_MS), which stops the feed's report of our own upload from evicting the content blob we just sent. Neither weakens the result — the state after a batch is what it always was.

The hang that showed up alongside this was a different bug, and this entry originally misattributed it. readdir stability at 133.94 s and a concurrency case that blew past its timeout were blamed here on the invalidation storm. They were not: the mount was freezing because network work runs on fuser's single dispatch thread, which is B75. Fixing that took the concurrency case from two timeouts in three runs to 16.9 / 24.1 / 29.1 s and readdir stability to 62.9 s. The coalescing above is still worth having — it is a real amplification — but it was never the stall.

Note on B70: B70's own fix was never implicated. The .crdownload park/un-park behaves correctly in isolation; the empty read arrived with the rename, on the same path a plain temp file takes. B70's live validation was blocked on this and is now unblocked — its acceptance case passes.

B75 — Network work on fuser's single dispatch thread freezes the whole mount

Status: Fixed in-tree 2026-07-26 — live-validated. Found 2026-07-26 while chasing what was thought to be a B74 regression. Impact: any burst of concurrent writes froze the entire mount — not the files being written, the mount. ls on an unrelated directory of it timed out for minutes. The daemon itself stayed healthy throughout: the primary mount and the control socket answered normally while a sync-folder mount was unreachable.

Root cause. mount.rs and devices.rs both build their session from Config::default(), which leaves n_threads unset, and fuser 0.17 defaults it to 1 (session.rs:254). One dispatch thread per mount reads a request, runs the handler to completion, and only then reads the next. Six handlers were handed to the [Workers] pool — lookup, getattr, readdir, read, getxattr and the slow serve_lookup — and everything else ran inline, including handlers that block on the API:

handler	blocking work
`create`	`upload_file` to mint the node, then `fetch_node` — two round trips
`mkdir`	`create_folder`, then `fetch_node`
`rename`	`rename_node`, then `move_node`, plus a trash on the replaced-destination path
`unlink` / `rmdir`	`trash_nodes`; `rmdir` enumerates the folder first
`setattr` (path truncate)	`queue_truncate` → `fill_gaps`, which reads the kept prefix from the remote

So eight applications each creating a file served one create at a time, and every read, open and lookup on that mount queued behind them.

Measured, acceptance suite's independent and shared-file concurrency (8 threads × 16 files), and a 3-second ls of the mount root sampled every 4 s throughout:

	before	after
concurrency case	200 s watchdog ×2, 37 s ×1	16.9 / 24.1 / 29.1 s, all pass
`ls` of the mount during the run	33 of 55 probes timed out	0 of 85
`readdir stability`	148.8 s	62.9 s
`namespace operations`	31.3 s	15.7 s

Fix: each of those handlers now parses its arguments inline — cheap, and it keeps the error paths prompt — and hands the body to the worker pool as a serve_* method, the pattern lookup/readdir already used. Metadata work takes Lane::Meta; the truncate path takes Lane::Transfer because it can pull a whole file.

release was deliberately left inline, and this is load-bearing. Moving it too made all three concurrency runs fail with concurrent file 1 mismatch. The kernel does not wait for a release reply before letting close(2) return, so the only thing sequencing the staging of the written bytes against the open + read an application issues immediately afterwards is that both are served by the same dispatch loop. From a worker, the read overtakes the staging and is answered from the remote's older revision. Taking release off the loop — worth doing, since queue_revision gap-fills a partial write from the network — needs a per-node "staging in flight" barrier that reads wait on, not the dispatch loop's accidental ordering.

Not fixed here. n_threads is still 1; with the blocking handlers moved off, the loop is short enough that raising it is a separate question. Related findings from the same audit, still open: cache/reader validity is keyed on (mtime, size) while the revision identity is active_revision_id (cache.rs:84 — two same-size revisions within one mtime second collide, which is what a SQLite page rewrite looks like); local_finish_scan holds the daemon's one SQLite connection across a full FTS5 trigram rebuild (db/local.rs:79); earliest_due_at has no <= now filter where next_due_op does, so the drain busy-spins when offline with a due op (db/ops.rs:385 vs :421); and drain_local_node deletes its op before the fallible adopt_real_uid (drain.rs:346).

236 KiB Raw Blame History Unescape Escape

Bugs & side findings

B100 — A freshly copied file reads as EIO or 53 bytes too big

B99 — Conflict copies in synced folders are logged again on every start and shown as "Resolved"

B98 — A superseded upload spins its drain thread forever and shows as "Uploading" at 0 bytes

B97 — Photo refreshes stack up on the control socket, and shutdown turns the resolve pass into a burst of "undecryptable photo" warnings

B96 — Staged bytes that name no node are never retired, and are re-announced on every boot

B95 — A real index.tmp is treated as a browser tempfile and parked forever

B94 — A parked create has no exit but the rename, so an abandoned one is stuck forever

B93 — A photo whose node would not resolve lost its name, and with it its tab and its group

B92 — Refreshing the gallery reported "Resource temporarily unavailable"

B91 — The daemon hung overnight, and nothing could say what it was waiting on

B90 — The local-file indexer walks into foreign FUSE mounts, and a dead one makes the daemon unkillable

B89 — The recorded SDK dependency is three minor versions out of date in the working memory

B88 — pdfs pin, rename, move, delete and sharing still cannot name a path under a secondary mount

B87 — A revision's block geometry is learned a read too late

B86 — An on-demand mount serves a listing that predates the mirror engine's own uploads

Fix (2026-08-17)

B84 — A block read that comes back short truncates the file, silently

B85 — The read path assumes 4 MiB blocks; some revisions do not have them

Correction to the diagnosis (2026-08-17)

Fix (2026-08-17)

B83 — An access-deferred op retries forever and is reported as an ordinary queued upload

B82 — A parent_uid cycle hangs the daemon on any short search

B81 — Prompt labels every Drive hit "My files", including device folders

B80 — 29% of the account is absent from the search index

B79 — Every write in an on-demand device-folder mount fails EACCES

B78 — Profile backup fails: Cannot create file at the root of a device

B1 — FUSE rename loses the file (data loss)

B2 — The reported .mkv went to trash, the repro vanished entirely

What was settled (2026-07-19)

Fix applied

If it recurs

B3 — Activity log timestamps written in seconds, read as milliseconds

B4 — invalidate_listing silently skipped non-resident folders

B5 — ls -l costs a network round trip per file (thumbnail xattr probes)

Reproduced (2026-07-19)

Cause (2026-07-20): a network round trip per file per xattr name

Fix

Verified (2026-07-20)

Secondary finding (still open): lookup is O(n) per name

Measurement notes for next time

B6 — Daemon sets no file modes: control.sock is an unguarded authority

B7 — renamed directory reads as missing until the entry TTL expires

B8 — no way to complete a CAPTCHA, so a gated sign-in is unrecoverable

B9 — Enter did not open the selected result in the launcher

B10 — GLib critical when the launcher closes over an in-flight open

B11 — a file moved while its create is still queued reads as empty

B12 — cold enumeration is slow per entry, and goes superlinear past ~500

Measured (cold; pdfs refresh <dir> then a timed ls -1)

Cause 1 (found, ~half the baseline): every FTS row is deleted by a full scan

Cause 2 (the dominant one): an S2K key derivation per file, to list a folder

The "cliff past ~500" framing was wrong

Fix: enumerate cheap, upgrade sizes in the background

Verified (2026-07-20)

Original cause-2 ruling-out (kept — all still true)

B13 — rename over an existing destination fails instead of replacing it

B14 — provisional (ciphertext) sizes make rsync read short and abort the file

Verified (2026-07-20) — correct, but expensive, and not completely closed

The cost, and the part still open

Per-chunk wakeup (done, unverified)

Plan: parallelise the per-file S2K (the 85 s)

B15 — an empty-but-listed folder, and duplicated folder uids

B16 — aria2c preallocation / rapid sequential writes trigger false self-conflict copies

B17 — FUSE mount lock contention, missing next_attempt_at in DB enqueue, and ioctl ENOTTY fix

B18 — Subtree Erasure via POSIX unlink / rmdir (CRIT-01)

B19 — Remote Folder Trashing on Mode Switch Failure (CRIT-02)

B20 — Un-fsynced Temp File Atomic Rename in Content Cache (CRIT-03)

B21 — Untracked Hole Punching in fallocate (HIGH-01)

B22 — Synchronous block_on inside Mutex Guard (HIGH-02)

B23 — Un-fsynced Scratch Wipe on Daemon Restart (HIGH-03)

B24 — Directory Hierarchy Loop in rename (HIGH-04)

B25 — Weak Conflict Baseline Detection (mtime, size) (HIGH-05)

B26 — Broken Open-Unlinked File Semantics (HIGH-06)

B27 — Orphaned Write Revision Bricking Offline Sync Queue (HIGH-07)

B28 — Unhandled Disk Exhaustion (ENOSPC) in Cache & Scratch Store (MED-01)

B29 — Missing FUSE forget Method / Memory Leak (MED-02)

B30 — SQLite Write Lock & Mutex Contention under Heavy Drain (MED-03)

B31 — Unimplemented Special Files & Attribute Modifications (MED-04)

B32 — Race Condition in Concurrent Handle Release and Open (MED-05)

236 KiB

Raw Blame History

B100 — A freshly copied file reads as `EIO` or 53 bytes too big

B95 — A real `index.tmp` is treated as a browser tempfile and parked forever

B88 — `pdfs pin`, `rename`, `move`, `delete` and sharing still cannot name a path under a secondary mount

B82 — A `parent_uid` cycle hangs the daemon on any short search

B4 — `invalidate_listing` silently skipped non-resident folders

B5 — `ls -l` costs a network round trip per file (thumbnail xattr probes)

Secondary finding (still open): `lookup` is O(n) per name

B6 — Daemon sets no file modes: `control.sock` is an unguarded authority

Measured (cold; `pdfs refresh <dir>` then a timed `ls -1`)

B13 — `rename` over an existing destination fails instead of replacing it

B15 — an empty-but-`listed` folder, and duplicated folder uids

B18 — Subtree Erasure via POSIX `unlink` / `rmdir` (CRIT-01)

B21 — Untracked Hole Punching in `fallocate` (HIGH-01)

B22 — Synchronous `block_on` inside Mutex Guard (HIGH-02)

B24 — Directory Hierarchy Loop in `rename` (HIGH-04)

B25 — Weak Conflict Baseline Detection `(mtime, size)` (HIGH-05)

B28 — Unhandled Disk Exhaustion (`ENOSPC`) in Cache & Scratch Store (MED-01)

B29 — Missing FUSE `forget` Method / Memory Leak (MED-02)

B69 — Spurious `(sync-conflict)` copies from mtime-keyed revision identity (B16/B25 root fix)

B72 — `pdfs trash` never returns