Files
proton-drive-linux/crates/pdfs-fuse/src/sync/engine.rs
T
2026-07-22 02:17:19 +02:00

252 lines
8.8 KiB
Rust

//! Filesystem watcher, polling, and debounce control plane.
use super::*;
/// How long the watcher must go quiet before a burst counts as finished.
///
/// Measured from the *last* event, not the first: applications do not write a
/// file once. An editor saves by writing a temp file and renaming it over the
/// target; an export or a database dump writes continuously for as long as it
/// takes. Settling a fixed interval after the first event walks the tree while
/// the file is still growing, and uploads a torn snapshot as a real revision —
/// corrected on the next pass, but only after spending the encrypt-and-upload
/// on a file that was never in that state.
const DEBOUNCE: Duration = Duration::from_secs(2);
/// Ceiling on the settle wait, so a directory under sustained change still
/// syncs. Without it, copying a large tree in — events arriving forever —
/// would postpone the reconcile for as long as the copy ran.
const MAX_SETTLE: Duration = Duration::from_secs(30);
/// How often to re-walk remotes so changes made on other clients are pulled in.
const POLL_INTERVAL: Duration = Duration::from_secs(120);
/// How many uploads/downloads/folder-creations a reconcile runs at once. The
/// per-item work is a network round-trip, so a folder with thousands of files is
/// unusable done one-at-a-time; this bounds concurrency like the bulk-upload
/// engine does.
pub(super) const SYNC_CONCURRENCY: usize = 8;
/// A message to the sync engine's control thread.
pub(crate) enum SyncMsg {
/// Reconcile one folder by id (a local change, or a targeted `SyncNow`).
Reconcile(i64),
/// Reconcile every mirror folder (periodic poll, or startup).
ReconcileAll,
/// Re-read the folder set and adjust the filesystem watches (after add/remove).
Rewatch,
}
/// Start the sync engine: a control thread that owns the filesystem watcher and
/// serialises reconcile passes, plus a periodic poll thread. The engine receives
/// on `rx`; senders live in [`Core::sync_tx`].
pub(crate) fn spawn(core: Core, rx: Receiver<SyncMsg>) {
if let Err(e) = std::thread::Builder::new()
.name("pdfs-sync".into())
.spawn(move || engine_loop(core, rx))
{
warn!(error = %e, "failed to start sync engine");
}
}
/// The engine control loop. Single-threaded so reconcile passes never overlap.
fn engine_loop(core: Core, rx: Receiver<SyncMsg>) {
// Paths the watcher currently covers, mapped to their folder id, so an event
// path can be resolved back to the folder it belongs to.
let watched: Mutex<Vec<(PathBuf, i64)>> = Mutex::new(Vec::new());
let tx_events = core.sync_tx.clone();
let mut watcher =
match notify::recommended_watcher(move |res: notify::Result<notify::Event>| {
let Ok(event) = res else { return };
// Ignore pure metadata/access noise; content changes are what matter.
if matches!(event.kind, notify::EventKind::Access(_)) {
return;
}
let _ = tx_events.send(SyncMsg::ReconcileAll);
}) {
Ok(w) => w,
Err(e) => {
warn!(error = %e, "filesystem watcher unavailable; sync is poll-only");
// Still run the loop so polling and explicit SyncNow work.
poll_only_loop(&core, rx);
return;
}
};
// Periodic remote poll.
{
let tx = core.sync_tx.clone();
std::thread::Builder::new()
.name("pdfs-sync-poll".into())
.spawn(move || {
loop {
std::thread::sleep(POLL_INTERVAL);
if tx.send(SyncMsg::ReconcileAll).is_err() {
break;
}
}
})
.ok();
}
rewatch(&core, &mut watcher, &watched);
reconcile_all(&core);
while let Ok(msg) = rx.recv() {
let mut ids: HashSet<i64> = HashSet::new();
let mut all = false;
let mut do_rewatch = false;
classify(msg, &mut ids, &mut all, &mut do_rewatch);
settle(&rx, &mut ids, &mut all, &mut do_rewatch);
if do_rewatch {
rewatch(&core, &mut watcher, &watched);
}
if all {
reconcile_all(&core);
} else {
for id in ids {
if let Ok(Some(folder)) = core.db.sync_folder_get(id) {
core.reconcile_folder(&folder);
}
}
}
}
}
/// Fallback loop when no filesystem watcher could be created: poll + SyncNow only.
fn poll_only_loop(core: &Core, rx: Receiver<SyncMsg>) {
{
let tx = core.sync_tx.clone();
std::thread::spawn(move || {
loop {
std::thread::sleep(POLL_INTERVAL);
if tx.send(SyncMsg::ReconcileAll).is_err() {
break;
}
}
});
}
reconcile_all(core);
while let Ok(msg) = rx.recv() {
let mut ids: HashSet<i64> = HashSet::new();
let mut all = false;
let mut do_rewatch = false;
classify(msg, &mut ids, &mut all, &mut do_rewatch);
settle(&rx, &mut ids, &mut all, &mut do_rewatch);
if all {
reconcile_all(core);
} else {
for id in ids {
if let Ok(Some(folder)) = core.db.sync_folder_get(id) {
core.reconcile_folder(&folder);
}
}
}
}
}
/// Absorb the rest of an event burst, returning once the watcher has been quiet
/// for `quiet` or `cap` has elapsed since the first event — whichever comes
/// first. The caller has already classified the event that opened the burst.
///
/// Split out with its timings as parameters so the settling behaviour can be
/// tested in milliseconds rather than in the tens of seconds the real constants
/// describe.
pub(super) fn settle_with(
rx: &Receiver<SyncMsg>,
ids: &mut HashSet<i64>,
all: &mut bool,
do_rewatch: &mut bool,
quiet: Duration,
cap: Duration,
) {
let deadline = Instant::now() + cap;
loop {
let now = Instant::now();
if now >= deadline {
break;
}
// Never wait past the cap, however quiet the watcher goes.
let wait = quiet.min(deadline - now);
match rx.recv_timeout(wait) {
// Another event: the burst is still going, so the quiet window
// starts again from here.
Ok(m) => classify(m, ids, all, do_rewatch),
// Quiet for a full window: whatever was being written has stopped.
Err(RecvTimeoutError::Timeout) => break,
// Every sender is gone; the caller's loop is about to end anyway.
Err(RecvTimeoutError::Disconnected) => break,
}
}
}
/// [`settle_with`] at the real timings.
fn settle(rx: &Receiver<SyncMsg>, ids: &mut HashSet<i64>, all: &mut bool, do_rewatch: &mut bool) {
settle_with(rx, ids, all, do_rewatch, DEBOUNCE, MAX_SETTLE);
}
pub(super) fn classify(msg: SyncMsg, ids: &mut HashSet<i64>, all: &mut bool, rewatch: &mut bool) {
match msg {
SyncMsg::Reconcile(id) => {
ids.insert(id);
}
SyncMsg::ReconcileAll => *all = true,
SyncMsg::Rewatch => *rewatch = true,
}
}
/// Reconcile every mirror folder in turn.
fn reconcile_all(core: &Core) {
let folders = match core.db.sync_folder_list() {
Ok(f) => f,
Err(e) => {
warn!(error = ?e, "sync: cannot list folders");
return;
}
};
for folder in folders {
core.reconcile_folder(&folder);
}
}
/// Bring the filesystem watches in line with the current mirror-folder set:
/// watch newly-added folders, drop removed ones.
fn rewatch(
core: &Core,
watcher: &mut notify::RecommendedWatcher,
watched: &Mutex<Vec<(PathBuf, i64)>>,
) {
let want: Vec<(PathBuf, i64)> = match core.db.sync_folder_list() {
Ok(f) => f
.into_iter()
.filter(|f| f.mode == "mirror")
.map(|f| (PathBuf::from(f.local_path), f.id))
.collect(),
Err(e) => {
warn!(error = ?e, "sync: cannot list folders to watch");
return;
}
};
let mut have = watched.lock();
// Drop watches no longer wanted.
have.retain(|(path, _)| {
if want.iter().any(|(p, _)| p == path) {
true
} else {
let _ = watcher.unwatch(path);
false
}
});
// Add newly wanted watches.
for (path, id) in &want {
if have.iter().any(|(p, _)| p == path) {
continue;
}
match watcher.watch(path, RecursiveMode::Recursive) {
Ok(()) => have.push((path.clone(), *id)),
Err(e) => warn!(path = %path.display(), error = %e, "sync: watch failed"),
}
}
}
// ---- reconcile ------------------------------------------------------------