Merge pull request 'release/1.1.0' (#1) from release/1.1.0 into main

Reviewed-on: #1

Cargo.lock

@@ -513,7 +513,7 @@ checksum = "48c757948c5ede0e46177b7add2e67155f70e33c07fea8284df6576da70b3719"
 
 [[package]]
 name = "ember-tune-rs"
-version = "1.0.0"
+version = "1.1.0"
 dependencies = [
  "anyhow",
  "clap",

Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "ember-tune-rs"
-version = "1.0.0"
+version = "1.1.0"
 edition = "2024"
 authors = ["Nils Pukropp <nils@narl.io>"]
 readme = "README.md"

README.md

@@ -1,87 +0,0 @@
-# xps-thermal-bench(8)
-
-## NAME
-xps-thermal-bench - Scientific, power-aware thermal optimizer for Dell XPS laptops
-
-## SYNOPSIS
-**xps-thermal-bench** [*OPTIONS*]
-
-## DESCRIPTION
-**xps-thermal-bench** is a professional diagnostic utility that automates the generation and deployment of optimized **i8kmon(1)** and **throttled** configurations. It uses scientific thermal resistance modeling and real-world throughput benchmarks to find the perfect balance between performance and acoustics for your specific hardware unit.
-
-### Key Scientific Features:
-*   **Environmental Calibration**: Samples your natural ambient idle temperature at startup to anchor fan curves correctly for your specific session (TTY vs. Desktop).
-*   **Thermal Resistance ($R_{\theta}$) Modeling**: Calculates the exact cooling efficiency (C/W) of your heatsink to determine sustainable power limits.
-*   **Thermal Inertia Tracking**: Measures how fast your laptop sheds heat to dynamically tune fan hysteresis, preventing the high-pitched "RPM hunting" common in thin-and-light chassis.
-*   **Silicon Knee Detection**: Identifies your CPU's unique throttling point by monitoring frequency stability jitter during load.
-*   **Interactive Deployment**: One-key installation of generated profiles directly to the system with automatic service restarts.
-
-## WORKFLOW
-1.  **System Audit**: The tool validates your kernel modules (`dell_smm`), power state (AC is required for accuracy), and interfering services.
-2.  **Calibration**: Captures your current environmental thermal floor.
-3.  **Benchmarking**: Runs a matrix of loads (25%–100%) against every fan tier.
-4.  **Optimization**: Calculates Quiet, Balanced, and Performance profiles using the gathered telemetry.
-5.  **Installation**: Press **'i'** in the TUI to deploy your favorite profile and restart services immediately.
-
-## OPTIONS
-**-b, --baseline-temp** *CELSIUS*
-    Target temperature for the cooling phase between tests. Default: 50.
-
-**-c, --critical-temp** *CELSIUS*
-    Safety ceiling at which a test is aborted. Default: 95.
-
-**-C, --i8kmon-conf** *PATH*
-    Override the path to the i8kmon configuration. (Default: Auto-discovered via systemd).
-
-**-T, --throttled-conf** *PATH*
-    Override the path to the throttled configuration. (Default: Auto-discovered via systemd).
-
-**-e, --export-dir** *DIR*
-    Directory to write generated configurations and backups.
-
-**-f, --history-file** *PATH*
-    Path to the JSON telemetry database. Default: thermal_history.json.
-
-**-q, --quick**
-    Fast-track mode (skips intermediate 50% and 75% load tiers).
-
-**-s, --stressor** *STRESSOR*
-    stress-ng workload type (e.g., `matrixprod`, `avx`, `cpu`, `fft`). Default: matrixprod.
-
-**--no-tui**
-    Disables the interactive terminal UI for a structured stdout log.
-
-**--skip-checks**
-    Bypasses the system audit. Use only if you know your hardware is compatible.
-
-**--reprocess** [*HISTORY_JSON*]
-    Generates new profiles and power limits from existing data without hardware tests.
-
-## KEYBINDS (TUI Mode)
-**TAB**
-    Cycle between Quiet, Balanced, and Performance profile previews.
-**i**
-    **Install** the currently selected profile to the system and restart services.
-**q**
-    Quit and restore original system state (governors, frequencies, services).
-
-## SAFETY & CLEANUP
-The tool is designed to be "interruption-safe." Even if the program panics or is killed via `Ctrl+C`, it utilizes the Rust `Drop` trait to ensure:
-*   Original CPU scaling governors are restored.
-*   CPU frequency limits are unlocked.
-*   Background power management services (like `auto-cpufreq` or `tlp`) are restarted.
-
-## SETUP
-### Prerequisites
-- **Kernel**: `dell_smm_hwmon` must be loaded.
-- **Power**: AC adapter must be connected.
-- **Dependencies**: `stress-ng`, `i8kmon`, and `throttled`.
-
-### Installation
-```bash
-cargo build --release
-sudo ./target/release/xps-thermal-bench
-```
-
-## SEE ALSO
-**i8kmon(1)**, **throttled(8)**, **stress-ng(1)**

assets/hardware_db.toml

@@ -0,0 +1,117 @@
+[metadata]
+version = "1.0.0"
+updated = "2026-02-26"
+description = "Hardware and Conflict Database for ember-tune Thermal Engine"
+
+# service collision
+
+[[conflicts]]
+id = "tlp_vs_ppd"
+services = ["tlp.service", "power-profiles-daemon.service"]
+contention = "ACPI Platform Profile / EPP"
+severity = "Critical"
+fix_action = "MaskBoth"
+help_text = "TLP and Power-Profiles-Daemon fight over power envelopes. Mask both to allow ember-tune deterministic control."
+
+[[conflicts]]
+id = "thermal_logic_collision"
+services = ["thermald.service", "throttled.service"]
+contention = "RAPL / MSR / BD-PROCHOT"
+severity = "High"
+fix_action = "SuspendService"
+help_text = "Thermald and Throttled create a 'register ping-pong' loop. Disable throttled; ember-tune will manage RAPL limits."
+
+[[conflicts]]
+id = "freq_scaling_collision"
+services = ["auto-cpufreq.service"]
+contention = "CPU Scaling Governor"
+severity = "Medium"
+fix_action = "SuspendService"
+help_text = "Auto-cpufreq interferes with deterministic Silicon Knee identification."
+
+# manufacturer wide logic
+
+[ecosystems.dell]
+vendor_regex = "(Dell.*|Precision.*|Latitude.*|XPS.*)"
+polling_cap_ms = 1000
+drivers = ["dell_smm_hwmon"]
+fan_manual_mode_cmd = "dell-bios-fan-control 0"
+fan_auto_mode_cmd = "dell-bios-fan-control 1"
+safety_register = "0x1FC" # BD PROCHOT MSR
+
+[ecosystems.lenovo]
+vendor_regex = "LENOVO"
+lap_mode_path = "/sys/devices/platform/thinkpad_acpi/dytc_lapmode"
+profiles_path = "/sys/firmware/acpi/platform_profile"
+ec_write_required = false # Varies by model
+
+[ecosystems.asus]
+vendor_regex = "ASUSTeK.*"
+thermal_policy_path = "/sys/devices/platform/asus-nb-wmi/throttle_thermal_policy"
+policy_map = { Balanced = 0, Turbo = 1, Silent = 2 }
+
+[ecosystems.hp]
+vendor_regex = "HP"
+msr_lock_register = "0x610"
+msr_lock_bit = 63
+fan_boost_path = "/sys/devices/platform/hp-wmi/hwmon/hwmon*/pwm1_enable"
+
+[ecosystems.framework]
+vendor_regex = "Framework"
+ec_tool = "ectool"
+optimization = "Direct-FFI-SMC"
+
+# quirks: model quirks and fixes
+
+[[quirks]]
+model_regex = "XPS 13 93.*"
+id = "dell_bd_prochot_fix"
+issue = "False Positive 400MHz Lock"
+monitor_msr = "0x1FC"
+reset_bit = 0
+action = "ClearBitOnSafeTemp"
+
+[[quirks]]
+model_regex = "ThinkPad T14.*"
+id = "lenovo_lap_throttling"
+issue = "11W TDP Lock in Lap Mode"
+trigger_path = "/sys/devices/platform/thinkpad_acpi/dytc_lapmode"
+trigger_value = "1"
+action = "AbortOnLapMode"
+
+[[quirks]]
+model_regex = "ROG Zephyrus G14"
+id = "asus_fan_hex_support"
+issue = "Custom Hex Curve Interface"
+target_path = "/sys/devices/platform/asus-nb-wmi/fan_curve"
+format = "HexPair16"
+
+[[quirks]]
+model_regex = "Spectre x360"
+id = "hp_rapl_lockout"
+issue = "Hardware MSR Lockout"
+action = "WarnUserMSRLocked"
+
+# heuristic discovery
+
+[discovery.sensors]
+temp_labels = ["Package id 0", "Tdie", "Tctl", "CPU Temperature"]
+fan_labels = ["CPU Fan", "GPU Fan", "System Fan"]
+hwmon_priority = ["coretemp", "zenpower", "k10temp", "dell_smm"]
+
+[discovery.actuators]
+rapl_paths = ["intel-rapl:0", "package-0"]
+amd_energy_paths = ["zenpower/energy1_input", "k10temp/energy1_input"]
+governor_files = ["energy_performance_preference", "energy_performance_hint", "scaling_governor"]
+
+# env health verification
+
+[[preflight_checks]]
+name = "MSR Write Access"
+check_cmd = "grep -q 'msr.allow_writes=on' /proc/cmdline"
+fail_help = "Add 'msr.allow_writes=on' to kernel parameters to allow power limit manipulation."
+
+[[preflight_checks]]
+name = "Kernel Lockdown Status"
+check_cmd = "cat /sys/kernel/security/lockdown | grep -q '\\[none\\]'"
+fail_help = "Kernel Lockdown is enabled. MMIO/MSR actuators are restricted by the Linux Security Module."

config/models/dell_inc./xps_13_9380.toml

@@ -1,105 +0,0 @@
-[meta]
-vendor = "Dell Inc."
-family = "XPS"
-model = "XPS 13 9380"
-
-[[requirements]]
-id = "msr-writes"
-name = "MSR Write Access"
-check_type = "Cmdline"
-target = "msr.allow_writes=on"
-action = "Manual"
-severity = "Fatal"
-message = "Throttled requires MSR write access to bypass TDP locks."
-solution = "Add msr.allow_writes=on to kernel parameters."
-
-[[requirements]]
-id = "dell-smm-ignore-dmi"
-name = "Dell SMM Ignore DMI"
-check_type = "Cmdline"
-target = "dell_smm_hwmon.ignore_dmi=1"
-action = "Manual"
-severity = "Fatal"
-message = "Required to force load fan control driver on this model."
-solution = "Add dell_smm_hwmon.ignore_dmi=1 to kernel parameters."
-
-[[requirements]]
-id = "bios-fan-ctrl"
-name = "BIOS Fan Control"
-check_type = "Service"
-target = "dell-bios-fan-control"
-invert = true
-action = "AutoRestore"
-severity = "Warning"
-message = "BIOS overrides i8kmon, causing fan pulsing."
-solution = "Tool will disable BIOS fan control (0) during run."
-
-[[diagnostics]]
-id = "gpe-storm-fix"
-name = "Interrupt Storm Fix"
-check_type = "Cmdline"
-target = "acpi_mask_gpe=0x6E"
-action = "Manual"
-severity = "Warning"
-message = "GPE 0x6E often storms on 9380, wasting 20% CPU."
-solution = "Add acpi_mask_gpe=0x6E to kernel parameters."
-
-[[diagnostics]]
-id = "s3-sleep"
-name = "S3 Deep Sleep"
-check_type = "Cmdline"
-target = "mem_sleep_default=deep"
-action = "Manual"
-severity = "Warning"
-message = "Modern Standby (s2idle) fails to sleep properly on 9380."
-solution = "Add mem_sleep_default=deep to force S3 sleep."
-
-[[diagnostics]]
-id = "psr-fix"
-name = "Panel Self Refresh Fix"
-check_type = "Cmdline"
-target = "i915.enable_psr=0"
-action = "Manual"
-severity = "Warning"
-message = "PSR causes screen freezes on 9380."
-solution = "Add i915.enable_psr=0 to kernel parameters."
-
-[[diagnostics]]
-id = "color-range-fix"
-name = "Full RGB Color Range"
-check_type = "Cmdline"
-target = "i915.color_range=2"
-action = "Manual"
-severity = "Warning"
-message = "Ensures full 0-255 RGB range on external monitors."
-solution = "Add i915.color_range=2 to kernel parameters."
-
-[[diagnostics]]
-id = "nvme-latency-fix"
-name = "NVMe Latency Fix"
-check_type = "Cmdline"
-target = "nvme_core.default_ps_max_latency_us=5500"
-action = "Manual"
-severity = "Warning"
-message = "Prevents SSD hangs on certain 9380 firmware."
-solution = "Add nvme_core.default_ps_max_latency_us=5500 to kernel parameters."
-
-[[diagnostics]]
-id = "audio-pop-fix"
-name = "Audio Pop Fix"
-check_type = "Cmdline"
-target = "snd_hda_intel.power_save=0"
-action = "Manual"
-severity = "Warning"
-message = "Prevents 'popping' sound in headphones."
-solution = "Add snd_hda_intel.power_save=0 to kernel parameters."
-
-[[diagnostics]]
-id = "intel-sgx"
-name = "Intel SGX State"
-check_type = "File"
-target = "/dev/sgx"
-action = "Manual"
-severity = "Warning"
-message = "SGX must be 'Software Controlled' for MSR access."
-solution = "Set Intel SGX to 'Software Controlled' in BIOS."

src/cli.rs

@@ -40,7 +40,7 @@ pub struct Cli {
     #[arg(
         short, 
         long,
-        help = "Writes high-resolution diagnostic logs to /tmp/ember-tune.log"
+        help = "Writes high-resolution diagnostic logs to /var/log/ember-tune.log"
     )]
     pub verbose: bool,
 

src/engine/formatters/i8kmon.rs

@@ -0,0 +1,41 @@
+pub struct I8kmonConfig {
+    pub t_ambient: f32,
+    pub t_max_fan: f32,
+}
+
+pub struct I8kmonTranslator;
+
+impl I8kmonTranslator {
+    pub fn generate_conf(config: &I8kmonConfig) -> String {
+        let t_off = config.t_ambient + 5.0;
+        let t_low_on = config.t_ambient + 12.0;
+        let t_low_off = config.t_ambient + 10.0;
+        let t_high_on = config.t_max_fan;
+        let t_high_off = config.t_max_fan - 5.0;
+        let t_low_trigger = (config.t_max_fan - 15.0).max(t_low_on + 2.0);
+
+        format!(
+            r#"# Generated by ember-tune Optimizer
+# Grounded in physical thermal resistance
+
+set config(gen_shadow)      1
+set config(i8k_ignore_dmi)  1
+
+# Fan states: {{state_low state_high temp_on temp_off}}
+set config(0) {{0 0 {t_low_on:.0} {t_off:.0}}}
+set config(1) {{1 1 {t_low_trigger:.0} {t_low_off:.0}}}
+set config(2) {{2 2 {t_high_on:.0} {t_high_off:.0}}}
+
+# Speed thresholds (approximate for XPS 9380)
+set config(speed_low)  2500
+set config(speed_high) 4500
+"#,
+            t_low_on = t_low_on,
+            t_off = t_off,
+            t_low_trigger = t_low_trigger,
+            t_low_off = t_low_off,
+            t_high_on = t_high_on,
+            t_high_off = t_high_off
+        )
+    }
+}

src/engine/formatters/mod.rs

@@ -1 +1,2 @@
 pub mod throttled;
+pub mod i8kmon;

src/engine/formatters/throttled.rs

@@ -1,3 +1,4 @@
+use std::collections::HashSet;
 
 pub struct ThrottledConfig {
     pub pl1_limit: f32,
@@ -11,7 +12,7 @@ impl ThrottledTranslator {
     pub fn generate_conf(config: &ThrottledConfig) -> String {
         format!(
             r#"[GENERAL]
-# Generated by FerroTherm Optimizer
+# Generated by ember-tune Optimizer
 # Physical Sweet Spot found at {pl1:.1}W
 
 [BATTERY]
@@ -35,4 +36,98 @@ Trip_Temp_C: {trip:.0}
             trip = config.trip_temp
         )
     }
+
+    /// Merges benchmarked values into an existing throttled.conf content.
+    /// Preserves all other sections (like [UnderVOLT]), comments, and formatting.
+    pub fn merge_conf(existing_content: &str, config: &ThrottledConfig) -> String {
+        let mut sections = Vec::new();
+        let mut current_section_name = String::new();
+        let mut current_section_lines = Vec::new();
+
+        // 1. Parse into sections to ensure we only update keys in [BATTERY] and [AC]
+        for line in existing_content.lines() {
+            let trimmed = line.trim();
+            if trimmed.starts_with('[') && trimmed.ends_with(']') {
+                if !current_section_lines.is_empty() || !current_section_name.is_empty() {
+                    sections.push((current_section_name.clone(), current_section_lines.clone()));
+                }
+                current_section_name = trimmed[1..trimmed.len() - 1].to_string();
+                current_section_lines = vec![line.to_string()];
+            } else {
+                current_section_lines.push(line.to_string());
+            }
+        }
+        sections.push((current_section_name, current_section_lines));
+
+        let target_keys = [
+            ("PL1_Tdp_W", format!("{:.0}", config.pl1_limit)),
+            ("PL2_Tdp_W", format!("{:.0}", config.pl2_limit)),
+            ("Trip_Temp_C", format!("{:.0}", config.trip_temp)),
+        ];
+
+        let mut result_lines = Vec::new();
+        let mut handled_sections = HashSet::new();
+
+        // 2. Process sections
+        for (name, mut lines) in sections {
+            if name == "BATTERY" || name == "AC" {
+                handled_sections.insert(name.clone());
+                let mut updated_keys = HashSet::new();
+                
+                let mut new_lines = Vec::new();
+                for line in lines {
+                    let mut updated = false;
+                    let trimmed = line.trim();
+                    
+                    if !trimmed.starts_with('#') && !trimmed.is_empty() {
+                        if let Some((key, _)) = trimmed.split_once(':') {
+                            let key = key.trim();
+                            for (target_key, new_value) in &target_keys {
+                                if key == *target_key {
+                                    if let Some(colon_idx) = line.find(':') {
+                                        let prefix = &line[..colon_idx + 1];
+                                        let rest = &line[colon_idx + 1..];
+                                        let comment = if let Some(hash_idx) = rest.find('#') {
+                                            &rest[hash_idx..]
+                                        } else {
+                                            ""
+                                        };
+                                        new_lines.push(format!("{} {}{}", prefix, new_value, comment));
+                                        updated_keys.insert(*target_key);
+                                        updated = true;
+                                        break;
+                                    }
+                                }
+                            }
+                        }
+                    }
+                    
+                    if !updated {
+                        new_lines.push(line);
+                    }
+                }
+                
+                for (target_key, new_value) in &target_keys {
+                    if !updated_keys.contains(*target_key) {
+                        new_lines.push(format!("{}: {}", target_key, new_value));
+                    }
+                }
+                lines = new_lines;
+            }
+            result_lines.extend(lines);
+        }
+
+        // 3. Add missing sections if they didn't exist at all
+        for section_name in &["BATTERY", "AC"] {
+            if !handled_sections.contains(*section_name) {
+                result_lines.push(String::new());
+                result_lines.push(format!("[{}]", section_name));
+                for (target_key, new_value) in &target_keys {
+                    result_lines.push(format!("{}: {}", target_key, new_value));
+                }
+            }
+        }
+
+        result_lines.join("\n")
+    }
 }

src/engine/mod.rs

@@ -69,8 +69,8 @@ impl OptimizerEngine {
             .unwrap_or(0.0)
     }
 
-    /// Finds the "Silicon Knee" - the point where performance per watt plateaus 
+    /// Finds the "Silicon Knee" - the point where performance per watt (efficiency) 
-    /// and thermal density spikes.
+    /// starts to diminish significantly and thermal density spikes.
     pub fn find_silicon_knee(&self, profile: &ThermalProfile) -> f32 {
         if profile.points.len() < 3 {
             return profile.points.last().map(|p| p.power_w).unwrap_or(15.0);
@@ -82,27 +82,42 @@ impl OptimizerEngine {
         let mut best_pl = points[0].power_w;
         let mut max_score = f32::MIN;
 
+        // Use a sliding window (3 points) to calculate gradients more robustly
         for i in 1..points.len() - 1 {
             let prev = &points[i - 1];
             let curr = &points[i];
             let next = &points[i + 1];
 
-            // 1. Performance Gradient (dMHz/dW)
+            // 1. Efficiency Metric (Throughput per Watt)
-            let dmhz_dw_prev = (curr.freq_mhz - prev.freq_mhz) / (curr.power_w - prev.power_w).max(0.1);
+            // If throughput is 0 (unsupported), fallback to Frequency per Watt
-            let dmhz_dw_next = (next.freq_mhz - curr.freq_mhz) / (next.power_w - curr.power_w).max(0.1);
+            let efficiency_curr = if curr.throughput > 0.0 {
-            let freq_diminish = dmhz_dw_prev - dmhz_dw_next;
+                curr.throughput as f32 / curr.power_w.max(0.1)
+            } else {
+                curr.freq_mhz / curr.power_w.max(0.1)
+            };
+            
+            let efficiency_next = if next.throughput > 0.0 {
+                next.throughput as f32 / next.power_w.max(0.1)
+            } else {
+                next.freq_mhz / next.power_w.max(0.1)
+            };
 
-            // 2. Thermal Gradient (d2T/dW2)
+            // Diminishing returns: how much efficiency drops per additional watt
+            let efficiency_drop = (efficiency_curr - efficiency_next) / (next.power_w - curr.power_w).max(0.1);
+
+            // 2. Thermal Acceleration (d2T/dW2)
             let dt_dw_prev = (curr.temp_c - prev.temp_c) / (curr.power_w - prev.power_w).max(0.1);
             let dt_dw_next = (next.temp_c - curr.temp_c) / (next.power_w - curr.power_w).max(0.1);
             let temp_accel = (dt_dw_next - dt_dw_prev) / (next.power_w - prev.power_w).max(0.1);
 
-            // 3. Wall Detection
+            // 3. Wall Detection (Any drop in absolute frequency/throughput is a hard wall)
-            let is_throttling = next.freq_mhz < curr.freq_mhz;
+            let is_throttling = next.freq_mhz < curr.freq_mhz || (next.throughput > 0.0 && next.throughput < curr.throughput);
-            let penalty = if is_throttling { 2000.0 } else { 0.0 };
+            let penalty = if is_throttling { 5000.0 } else { 0.0 };
 
-            // Heuristic scoring: Weight thermal acceleration and diminishing frequency gains
+            // Heuristic scoring: 
-            let score = (freq_diminish * 2.0) + (temp_accel * 10.0) - penalty;
+            // - Higher score is "Better" (The Knee is the peak of this curve)
+            // - We want high efficiency (low drop) and low thermal acceleration.
+            let score = (efficiency_curr * 10.0) - (efficiency_drop * 50.0) - (temp_accel * 20.0) - penalty;
 
             if score > max_score {
                 max_score = score;

src/main.rs

@@ -75,7 +75,7 @@ fn print_summary_report(result: &OptimizationResult) {
 }
 
 fn setup_logging(verbose: bool) -> tracing_appender::non_blocking::WorkerGuard {
-    let file_appender = tracing_appender::rolling::never("/tmp", "ember-tune.log");
+    let file_appender = tracing_appender::rolling::never("/var/log", "ember-tune.log");
     let (non_blocking, guard) = tracing_appender::non_blocking(file_appender);
     
     let level = if verbose { tracing::Level::DEBUG } else { tracing::Level::INFO };
@@ -217,7 +217,7 @@ fn main() -> Result<()> {
         cpu_temp: 0.0,
         power_w: 0.0,
         current_freq: 0.0,
-        fan_rpm: 0,
+        fans: Vec::new(),
         governor: "detecting".to_string(),
         pl1_limit: 0.0,
         pl2_limit: 0.0,

src/mediator.rs

@@ -33,7 +33,7 @@ pub struct TelemetryState {
     pub cpu_temp: f32,
     pub power_w: f32,
     pub current_freq: f32,
-    pub fan_rpm: u32,
+    pub fans: Vec<u32>,
     
     // --- High-res History (Last 60s @ 500ms = 120 points) ---
     pub history_watts: Vec<f32>,

src/orchestrator/mod.rs

@@ -151,15 +151,16 @@ impl BenchmarkOrchestrator {
             // Record data point
             let avg_p = self.sensors.get_power_w().unwrap_or(0.0);
             let avg_t = self.sensors.get_temp().unwrap_or(0.0);
-            let avg_f = 2500.0; // Mock frequency until SensorBus expanded
+            let avg_f = self.sensors.get_freq_mhz().unwrap_or(0.0);
-            let fan = self.sensors.get_fan_rpm().unwrap_or(0);
+            let fans = self.sensors.get_fan_rpms().unwrap_or_default();
+            let primary_fan = fans.first().cloned().unwrap_or(0);
             let tp = self.workload.get_throughput().unwrap_or(0.0);
             
             self.profile.points.push(ThermalPoint { 
                 power_w: avg_p, 
                 temp_c: avg_t, 
                 freq_mhz: avg_f,
-                fan_rpm: fan,
+                fan_rpm: primary_fan,
                 throughput: tp,
             });
 
@@ -181,7 +182,7 @@ impl BenchmarkOrchestrator {
 
         // Phase 5: Finalizing
         self.phase = BenchmarkPhase::Finalizing;
-        self.log("Benchmark sequence complete. Generating configuration...")?;
+        self.log("Benchmark sequence complete. Generating configurations...")?;
 
         let config = crate::engine::formatters::throttled::ThrottledConfig {
             pl1_limit: res.silicon_knee_watts,
@@ -189,9 +190,25 @@ impl BenchmarkOrchestrator {
             trip_temp: res.max_temp_c.max(95.0), 
         };
 
-        let conf_content = crate::engine::formatters::throttled::ThrottledTranslator::generate_conf(&config);
+        // 1. Throttled (Merged if exists)
-        std::fs::write("throttled.conf", conf_content)?;
+        let throttled_path = "throttled.conf";
-        self.log("✓ Saved 'throttled.conf'.")?;
+        let existing_throttled = std::fs::read_to_string(throttled_path).unwrap_or_default();
+        let throttled_content = if existing_throttled.is_empty() {
+            crate::engine::formatters::throttled::ThrottledTranslator::generate_conf(&config)
+        } else {
+            crate::engine::formatters::throttled::ThrottledTranslator::merge_conf(&existing_throttled, &config)
+        };
+        std::fs::write(throttled_path, throttled_content)?;
+        self.log("✓ Saved 'throttled.conf' (merged).")?;
+
+        // 2. i8kmon
+        let i8k_config = crate::engine::formatters::i8kmon::I8kmonConfig {
+            t_ambient: self.profile.ambient_temp,
+            t_max_fan: res.max_temp_c - 5.0, // Aim to hit max fan before max temp
+        };
+        let i8k_content = crate::engine::formatters::i8kmon::I8kmonTranslator::generate_conf(&i8k_config);
+        std::fs::write("i8kmon.conf", i8k_content)?;
+        self.log("✓ Saved 'i8kmon.conf'.")?;
         
         self.guard.restore()?;
         self.log("✓ Environment restored.")?;
@@ -233,8 +250,8 @@ impl BenchmarkOrchestrator {
             tick: 0, 
             cpu_temp: self.sensors.get_temp().unwrap_or(0.0),
             power_w: self.sensors.get_power_w().unwrap_or(0.0),
-            current_freq: 0.0,
+            current_freq: self.sensors.get_freq_mhz().unwrap_or(0.0),
-            fan_rpm: self.sensors.get_fan_rpm().unwrap_or(0),
+            fans: self.sensors.get_fan_rpms().unwrap_or_default(),
             governor: "unknown".to_string(),
             pl1_limit: 0.0,
             pl2_limit: 0.0,
@@ -252,7 +269,7 @@ impl BenchmarkOrchestrator {
     fn send_telemetry(&mut self, tick: u64) -> Result<()> {
         let temp = self.sensors.get_temp().unwrap_or(0.0);
         let pwr = self.sensors.get_power_w().unwrap_or(0.0);
-        let freq = 0.0; 
+        let freq = self.sensors.get_freq_mhz().unwrap_or(0.0);
         
         self.history_temp.push_back(temp);
         self.history_watts.push_back(pwr);
@@ -271,7 +288,7 @@ impl BenchmarkOrchestrator {
             cpu_temp: temp,
             power_w: pwr,
             current_freq: freq, 
-            fan_rpm: self.sensors.get_fan_rpm().unwrap_or(0),
+            fans: self.sensors.get_fan_rpms().unwrap_or_default(),
             governor: "performance".to_string(), 
             pl1_limit: 15.0, 
             pl2_limit: 25.0, 

src/sal/dell_xps_9380.rs

@@ -10,19 +10,20 @@ use tracing::debug;
 pub struct DellXps9380Sal {
     temp_path: PathBuf,
     pwr_path: PathBuf,
-    fan_path: PathBuf,
+    fan_paths: Vec<PathBuf>,
+    freq_path: PathBuf,
     pl1_path: PathBuf,
     pl2_path: PathBuf,
     last_poll: Mutex<Instant>,
     last_temp: Mutex<f32>,
-    last_fan: Mutex<u32>,
+    last_fans: Mutex<Vec<u32>>,
 }
 
 impl DellXps9380Sal {
     pub fn init() -> Result<Self> {
         let mut temp_path = None;
         let mut pwr_path = None;
-        let mut fan_path = None;
+        let mut fan_paths = Vec::new();
         let mut rapl_base_path = None;
 
         // Dynamic hwmon discovery
@@ -33,7 +34,17 @@ impl DellXps9380Sal {
                 
                 if name == "dell_smm" {
                     temp_path = Some(p.join("temp1_input"));
-                    fan_path = Some(p.join("fan1_input"));
+                    // Discover all fans
+                    if let Ok(fan_entries) = fs::read_dir(&p) {
+                        for fan_entry in fan_entries.flatten() {
+                            let fan_p = fan_entry.path();
+                            if fan_p.file_name().unwrap_or_default().to_string_lossy().starts_with("fan") && 
+                               fan_p.file_name().unwrap_or_default().to_string_lossy().ends_with("_input") {
+                                fan_paths.push(fan_p);
+                            }
+                        }
+                    }
+                    fan_paths.sort();
                 }
                 
                 if name == "intel_rapl" || name == "rapl" {
@@ -59,16 +70,18 @@ impl DellXps9380Sal {
         }
 
         let rapl_base = rapl_base_path.context("Could not find RAPL package-0 path in powercap")?;
+        let freq_path = PathBuf::from("/sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq");
 
         Ok(Self {
             temp_path: temp_path.context("Could not find dell_smm temperature path")?,
             pwr_path: pwr_path.context("Could not find RAPL power path")?,
-            fan_path: fan_path.context("Could not find dell_smm fan path")?,
+            fan_paths,
+            freq_path,
             pl1_path: rapl_base.join("constraint_0_power_limit_uw"),
             pl2_path: rapl_base.join("constraint_1_power_limit_uw"),
             last_poll: Mutex::new(Instant::now() - Duration::from_secs(2)),
             last_temp: Mutex::new(0.0),
-            last_fan: Mutex::new(0),
+            last_fans: Mutex::new(Vec::new()),
         })
     }
 }
@@ -83,7 +96,19 @@ impl PreflightAuditor for DellXps9380Sal {
             outcome: if unsafe { libc::getuid() } == 0 { Ok(()) } else { Err(AuditError::RootRequired) }
         });
 
-        // 2. Kernel parameters check
+        // 2. Kernel modules check (simplified check via sysfs/proc)
+        let modules = ["dell_smm_hwmon", "msr", "intel_rapl_msr"];
+        for mod_name in modules {
+            let path = format!("/sys/module/{}", mod_name);
+            steps.push(AuditStep {
+                description: format!("Kernel Module: {}", mod_name),
+                outcome: if PathBuf::from(path).exists() { Ok(()) } else { 
+                    Err(AuditError::ToolMissing(format!("Module '{}' not loaded. Run 'sudo modprobe {}'", mod_name, mod_name)))
+                }
+            });
+        }
+
+        // 3. Kernel parameters check
         let cmdline = fs::read_to_string("/proc/cmdline").unwrap_or_default();
         steps.push(AuditStep {
             description: "Kernel Param: dell_smm_hwmon.ignore_dmi=1".to_string(),
@@ -91,6 +116,12 @@ impl PreflightAuditor for DellXps9380Sal {
                 Err(AuditError::MissingKernelParam("dell_smm_hwmon.ignore_dmi=1".to_string())) 
             }
         });
+        steps.push(AuditStep {
+            description: "Kernel Param: dell_smm_hwmon.restricted=0".to_string(),
+            outcome: if cmdline.contains("dell_smm_hwmon.restricted=0") { Ok(()) } else { 
+                Err(AuditError::MissingKernelParam("dell_smm_hwmon.restricted=0".to_string())) 
+            }
+        });
         steps.push(AuditStep {
             description: "Kernel Param: msr.allow_writes=on".to_string(),
             outcome: if cmdline.contains("msr.allow_writes=on") { Ok(()) } else { 
@@ -98,7 +129,16 @@ impl PreflightAuditor for DellXps9380Sal {
             }
         });
 
-        // 3. Check AC power
+        // 4. Lockdown check
+        let lockdown = fs::read_to_string("/sys/kernel/security/lockdown").unwrap_or_default();
+        steps.push(AuditStep {
+            description: "Kernel Lockdown Status".to_string(),
+            outcome: if lockdown.contains("[none]") || lockdown.is_empty() { Ok(()) } else { 
+                Err(AuditError::KernelIncompatible("Kernel is in lockdown mode. Set to 'none' to allow MSR/SMM writes.".to_string())) 
+            }
+        });
+
+        // 5. Check AC power
         let ac_status = fs::read_to_string("/sys/class/power_supply/AC/online").unwrap_or_else(|_| "0".to_string());
         steps.push(AuditStep {
             description: "AC Power Connection".to_string(),
@@ -123,9 +163,10 @@ impl DellXps9380Guard {
 
 impl EnvironmentGuard for DellXps9380Guard {
     fn suppress(&mut self) -> Result<()> {
-        let services = ["tlp", "thermald"];
+        let services = ["tlp", "thermald", "i8kmon"];
         for s in services {
             if Command::new("systemctl").args(["is-active", "--quiet", s]).status()?.success() {
+                debug!("Suppressing service: {}", s);
                 Command::new("systemctl").args(["stop", s]).status()?;
                 self.stopped_services.push(s.to_string());
             }
@@ -179,20 +220,32 @@ impl SensorBus for DellXps9380Sal {
         }
     }
 
-    fn get_fan_rpm(&self) -> Result<u32> {
+    fn get_fan_rpms(&self) -> Result<Vec<u32>> {
         let mut last_poll = self.last_poll.lock().unwrap();
         let now = Instant::now();
 
         if now.duration_since(*last_poll) < Duration::from_millis(1000) {
-            return Ok(*self.last_fan.lock().unwrap());
+            return Ok(self.last_fans.lock().unwrap().clone());
         }
 
-        let s = fs::read_to_string(&self.fan_path)?;
+        let mut fans = Vec::new();
-        let val = s.trim().parse::<u32>()?;
+        for path in &self.fan_paths {
+            if let Ok(s) = fs::read_to_string(path) {
+                if let Ok(rpm) = s.trim().parse::<u32>() {
+                    fans.push(rpm);
+                }
+            }
+        }
         
-        *self.last_fan.lock().unwrap() = val;
+        *self.last_fans.lock().unwrap() = fans.clone();
         *last_poll = now;
         
+        Ok(fans)
+    }
+
+    fn get_freq_mhz(&self) -> Result<f32> {
+        let s = fs::read_to_string(&self.freq_path)?;
+        let val = s.trim().parse::<f32>()? / 1000.0;
         Ok(val)
     }
 }

src/sal/mock.rs

@@ -50,8 +50,11 @@ impl SensorBus for MockSensorBus {
     fn get_power_w(&self) -> Result<f32> {
         Ok(15.0)
     }
-    fn get_fan_rpm(&self) -> Result<u32> {
+    fn get_fan_rpms(&self) -> Result<Vec<u32>> {
-        Ok(2500)
+        Ok(vec![2500])
+    }
+    fn get_freq_mhz(&self) -> Result<f32> {
+        Ok(3200.0)
     }
 }
 

src/sal/traits.rs

@@ -54,10 +54,11 @@ pub trait EnvironmentGuard {
 }
 
 /// Read-only interface for standardized metrics.
-pub trait SensorBus {
+pub trait SensorBus: Send + Sync {
     fn get_temp(&self) -> Result<f32>;
     fn get_power_w(&self) -> Result<f32>;
-    fn get_fan_rpm(&self) -> Result<u32>;
+    fn get_fan_rpms(&self) -> Result<Vec<u32>>;
+    fn get_freq_mhz(&self) -> Result<f32>;
 }
 
 impl<T: SensorBus + ?Sized> SensorBus for Arc<T> {
@@ -67,8 +68,11 @@ impl<T: SensorBus + ?Sized> SensorBus for Arc<T> {
     fn get_power_w(&self) -> Result<f32> {
         (**self).get_power_w()
     }
-    fn get_fan_rpm(&self) -> Result<u32> {
+    fn get_fan_rpms(&self) -> Result<Vec<u32>> {
-        (**self).get_fan_rpm()
+        (**self).get_fan_rpms()
+    }
+    fn get_freq_mhz(&self) -> Result<f32> {
+        (**self).get_freq_mhz()
     }
 }
 

src/ui/dashboard.rs

@@ -18,7 +18,7 @@ pub struct DashboardState {
 impl DashboardState {
     pub fn new() -> Self {
         Self {
-            logs: vec!["FerroTherm Initialized.".to_string()],
+            logs: vec!["ember-tune Initialized.".to_string()],
         }
     }
 
@@ -58,7 +58,7 @@ pub fn draw_dashboard(
         .direction(Direction::Vertical)
         .constraints([
             Constraint::Length(10), // Gauges
-            Constraint::Length(3),  // Cooling
+            Constraint::Min(4),     // Cooling (Increased for multiple fans)
             Constraint::Length(3),  // CPU State
             Constraint::Min(4),     // Metadata
         ])
@@ -92,7 +92,7 @@ fn draw_header(f: &mut Frame, area: Rect, state: &TelemetryState) {
     let hostname = std::env::var("HOSTNAME").unwrap_or_else(|_| "localhost".into());
 
     let left = Span::styled(format!(" 󰈐 {} ", hostname), Style::default().fg(C_MAUVE).add_modifier(Modifier::BOLD));
-    let center = Span::styled(" FERROTHERM THERMAL BENCH ", Style::default().fg(C_LAVENDER).add_modifier(Modifier::BOLD));
+    let center = Span::styled(" EMBER-TUNE THERMAL BENCH ", Style::default().fg(C_LAVENDER).add_modifier(Modifier::BOLD));
     let right = Span::styled(format!(" UPTIME: {} ", uptime), Style::default().fg(C_SUBTEXT));
 
     let total_width = area.width;
@@ -182,13 +182,35 @@ fn draw_cooling(f: &mut Frame, area: Rect, state: &TelemetryState) {
     let inner = block.inner(area);
     f.render_widget(block, area);
 
-    let info = Line::from(vec![
+    let mut lines = Vec::new();
+    
+    // Line 1: Tier
+    lines.push(Line::from(vec![
         Span::styled(" Tier: ", Style::default().fg(C_LAVENDER)),
         Span::styled(&state.fan_tier, Style::default().fg(C_TEAL)),
-        Span::styled(" | RPM: ", Style::default().fg(C_LAVENDER)),
+    ]));
-        Span::styled(format!("{}", state.fan_rpm), Style::default().fg(C_TEXT)),
+
-    ]);
+    // Line 2+: Fans
-    f.render_widget(Paragraph::new(info), inner);
+    if state.fans.is_empty() {
+        lines.push(Line::from(vec![
+            Span::styled(" Fans: ", Style::default().fg(C_LAVENDER)),
+            Span::styled("N/A", Style::default().fg(C_SUBTEXT)),
+        ]));
+    } else if state.fans.len() == 1 {
+        lines.push(Line::from(vec![
+            Span::styled(" Fan:  ", Style::default().fg(C_LAVENDER)),
+            Span::styled(format!("{} RPM", state.fans[0]), Style::default().fg(C_TEXT)),
+        ]));
+    } else {
+        for (i, rpm) in state.fans.iter().enumerate() {
+            lines.push(Line::from(vec![
+                Span::styled(format!(" Fan {}: ", i + 1), Style::default().fg(C_LAVENDER)),
+                Span::styled(format!("{} RPM", rpm), Style::default().fg(C_TEXT)),
+            ]));
+        }
+    }
+
+    f.render_widget(Paragraph::new(lines), inner);
 }
 
 fn draw_cpu_state(f: &mut Frame, area: Rect, state: &TelemetryState) {