updated keybinds and window rules

.gitignore

@@ -25,3 +25,4 @@
 !systemd/
 fish/fish_variables
 waybar/fluxo-rs
+!fluxo/

fluxo/config.toml

@@ -0,0 +1,85 @@
+# fluxo-rs configuration
+# Location: ~/.config/fluxo/config.toml
+
+[general]
+menu_command = "fuzzel --dmenu --prompt \"$FLUXO_PROMPT\""
+
+[signals]
+network = 1
+cpu = 2
+memory = 3
+gpu = 4
+sys = 5
+disk = 6
+game = 7
+audio = 8
+bt = 9
+power = 10
+mpris = 11
+backlight = 12
+dnd = 13
+
+[network]
+format = "{interface} ({ip}):  {rx:^4.1} MB/s   {tx:^4.1} MB/s"
+
+[cpu]
+format = "CPU: {usage:^4.1}% {temp:^4.1}C"
+
+[memory]
+format = "MEM: {used:^4.1}/{total:^4.1}GB"
+
+[sys]
+format = "UP: {uptime} LOAD: {load1:^3.1} "
+
+[disk]
+format = "{mount} {used:^3.0}/{total:^3.0}G"
+
+
+[power]
+format = "{percentage:>3}%  {icon}"
+
+[audio]
+format_sink_unmuted = "{name} {volume:>3}% <span size='large'> {icon}</span>"
+format_sink_muted = "{name} <span size='large'> {icon}</span>"
+format_source_unmuted = "{name} {volume:>3}% <span size='large'> {icon}</span>"
+format_source_muted = "{name} <span size='large'> {icon}</span>"
+
+[bt]
+format_plugin = "{alias} [{left}|{right}] {anc} <span size='large'> 󰂰</span>"
+format_connected = "{alias} <span size='large'> 󰂰</span>"
+format_disconnected = "Disconnected <span size='large'> 󰂯</span>"
+format_disabled = "<span size='large'>󰂲</span>"
+
+[game]
+format_active = "<span size='large'>󰊖</span>"
+format_inactive = "<span size='large'></span>"
+
+[mpris]
+format = "{artist} - {title}"
+max_length = 20
+scroll = true 
+scroll_speed = 500
+scroll_separator = " /// "
+
+[pool]
+enabled = false
+format = "{used:>4.0}G / {total:>4.0}G"
+
+[gpu]
+enabled = false
+format_amd = "AMD: {usage:>3.0}% {vram_used:>4.1}/{vram_total:>4.1}GB {temp:>4.1}C"
+format_intel = "iGPU: {usage:>3.0}%"
+format_nvidia = "NV: {usage:>3.0}% {vram_used:>4.1}/{vram_total:>4.1}GB {temp:>4.1}C"
+
+[keyboard]
+enabled = false
+format = "{layout}"
+
+[backlight]
+enable = true 
+format = " {icon} {percentage}"
+
+[dnd]
+enabled = true
+format_dnd = "<span size='large'>󰂛</span>"
+format_normal = "<span size='large'>󰂚</span>"

hypr/README.md

@@ -0,0 +1,83 @@
+<div align="center">
+    <h1>✦ Google-ish Hyprlock Theme ✦</h1>
+    <h3></h3>
+</div>
+
+## ▶️ Preview
+<details>
+	<summary><b>Without Profile & User Info</b></summary>
+	<img src="https://github.com/user-attachments/assets/7bbacd47-b0d7-4132-9951-53dc0ead604c" alt="Hyprlock-Without-Profile" width="1280">
+</details>
+<details>
+	<summary><b>With Profile & User Info</b></summary>
+	<img src="https://github.com/user-attachments/assets/9a58a6e2-a71f-4b28-998a-8a45c8950aaf" alt="Hyprlock-With-Profile" width="1280">
+</details>
+<details>
+	<summary><b>With Profile & User Info [12H Format]</b></summary>
+	<img src="https://github.com/user-attachments/assets/e0049860-7511-432e-8814-8d17d448182b" alt="Hyprlock-With-Profile" width="1280">
+</details>
+
+## 📦 Installation
+><i><b>❗ This configuration is based on a 1080p display, if you are using a higher screen resolution,</br>you may need to reconfigure the sizes and recoordinate all the components.</b></i>
+
+<b>Auto-Installation :</b>
+```bash
+sh -c "$(curl -fsSL https://raw.githubusercontent.com/Tamarindtype/googlish-hyprlock-theme/main/install.sh)"
+```
+</br><b>Manual Installation :</b>
+```bash
+# Backup your current Hyprlock config first!
+# Clone the repository
+git clone https://github.com/Tamarindtype/googlish-hyprlock-theme.git
+
+# Move all the files to the hyprland config folder
+mv ./googlish-hyprlock-theme/* ~/.config/hypr/
+
+# Go to script folder
+cd $HOME/.config/hypr/hyprlock/
+
+# Change all the scripts permission to make them executable
+chmod +x *.sh
+
+# Run the Hyprlock
+hyprlock
+```
+
+## 🗄️ Directory Structure
+```md
+$HOME
+└── .config
+    └── hypr
+        ├── hyprlock
+        │  ├── assets
+        │  ├── battery.sh
+        │  ├── bluetooth.sh
+        │  ├── change_wallpaper.sh
+        │  ├── greeting.sh
+        │  ├── network.sh
+        │  ├── medianotif.sh
+        │  └── weatherinfo.sh
+        └── hyprlock.conf
+```
+
+## 🗨️ FAQ
+| Question | Answer |
+| --- | --- |
+| Profile & User info does not appear? | By default, it set without profile and user info. You can enable it by uncomment the `image` @PROFILE PICTURE and `label` @USER INFO in `hyprlock.conf` |
+| Battery percentage number does not appear? | Change your battery module in `battery.sh`. The default is `BAT0`, you can check it by running this command `ls /sys/class/power_supply/` |
+| How to change the 24H Format to 12H Format? | Comment the 24H format and uncomment the 12H format. also uncomment the AM/PM `label` & `shape` in `hyprlock.conf` |
+| null location or Unable to determine your location? | Change the IP Geolocation provider in `weatherinfo.sh` |
+
+## 🏅 Recommendations
+| Type | Name | Links |
+| --- | --- | --- |
+| Regular | PP Neue Machina | [Pangram Pangram](https://pangrampangram.com/products/neue-machina) |
+| Nerd Font | Geist & Space Mono | [Nerd Fonts](https://github.com/ryanoasis/nerd-fonts/releases) |
+| Emoji | Apple Emoji | [apple-emoji-linux](https://github.com/samuelngs/apple-emoji-linux) |
+
+## ✨ Special Thanks & Credits
+
+| Details | Credit |
+| --- | --- |
+| Battery & Playerctl Widget Scripts | @ashish-kus [minimal Hyprlock](https://gist.github.com/ashish-kus/dd562b0bf5e8488a09e0b9c289f4574c) |
+| Helped Me Create Dynamic WiFi, Bluetooth, Weathercast and Greeting Widget | @OPENAI [ChatGPT](https://chatgpt.com/)|

hypr/hyprlock.conf

@@ -1,155 +1,545 @@
-source = $HOME/.config/hypr/catppuccin-hyprland/themes/mocha.conf
+# For more information visit https://wiki.hyprland.org/Hypr-Ecosystem/hyprlock/
+
+source = ~/.config/hypr/catppuccin-hyprland/themes/mocha.conf
+
+$scrPath      = ~/.config/hypr/hyprlock/
+$imgPath      = ~/.config/hypr/hyprlock/assets/
+
+$USER         = narl    # Your Alias
+$host         = uname -n #Your Alias
+$wifi-mode    = false # Change the WiFi output. true = show SSID, false = Connected.
+$bt-mode      = false # Change the Bluetooth output. true = show Device name, false = Connected.
+
+# Default geolocation provider is IP-API.COM, hardcode it if the location does not match the current location.
+# Hardcode your location (If hardcode does not recognize your City, change it to IP Geolocation provider in weatherinfo.sh)
+$CITY         = 
+$COUNTRY      = 
+
+# WALLPAPER
+# Just comment and uncomment to select
+$wallpaper    = screenshot
+#$wallpaper    = ~/your/wallpaper-path.png
+$blur  = 2
+
+# ADJUST HERE
+$rounding     = 12
+$shape-rd     = -1
+$font-text    = GeistMono Nerd Font Bold
+$font-text0   = GeistMono Nerd Font
+$font-display = PP Neue Machina Ultra-Bold
+$font-symbol  = JetBrainsMono Nerd Font Mono
+# Input Var
+$weight       = 2
+$inner-color  = rgba($baseAlpha80)
+$border-color = rgba($mauveAlpha80)
+
+# Colors
+$clock-color  = $text
+$fg0          = $text
+$fg1          = $base
+$shape-col0   = $mauve
+$shape-col1   = rgba($surface0Alpha80)
+$shape-col2   = rgba($surface1Alpha80)
+$shadow-pass  = 2
+$shadow-size  = 3
+$shadow-color = $crust
+$shadow-boost = 1.2
+$text-shadow-pass   = 1
+$text-shadow-boost  = 0.5
+
 
-$accent = $mauve
-$accentAlpha = $mauveAlpha
-$font = JetBrainsMono Nerd Font
 
 # GENERAL
 general {
-  hide_cursor = true
+    no_fade_in          = true
-  no_fade_in = false
+    grace               = 1
-  grace = 0
+    disable_loading_bar = false
-  disable_loading_bar = true
+    hide_cursor         = true
+    ignore_empty_input  = true
+    text_trim           = true
 }
 
-# BACKGROUND
+#BACKGROUND
 background {
-  monitor =
+    monitor     = 
-  path = $HOME/Pictures/reze/reze.png
+    path        = $wallpaper
-  blur_passes = 3
+
-  blur_size = 7
+    blur_passes         = $blur
-  noise = 0.0117
+    contrast            = 0.8916
-  contrast = 0.8916
+    brightness          = 0.7172
-  brightness = 0.8172
+    vibrancy            = 0.1696
-  vibrancy = 0.1696
+    vibrancy_darkness   = 0
-  vibrancy_darkness = 0.0
-  color = $base
 }
 
-# TIME
+# PROFILE PICTURE
+image {
+    monitor     =
+    path        = $imgPath/profile.jpg 
+    size        = 120 # lesser side if not 1:1 ratio
+    opacity     = 0.25
+
+    shadow_pass         = $shadow-pass
+    shadow_size         = $shadow-size
+    shadow_color        = $shadow-color
+    shadow_boost        = $shadow-boost
+
+    rounding            = $rounding # negative values mean circle
+    border_size         = 4
+    border_color        = $mauve
+    rotate              = 0 # degrees, counter-clockwise
+    
+    position            = 20, -20
+    halign              = left
+    valign              = top
+    zindex              = 1
+}
+
+# USER INFO
 label {
-  monitor =
+    monitor     =
-  text = $TIME
+    text        = cmd[update:1000] echo -e "$USER\n󰁥 $($host)\n\n$(uname -r)\nPackages: $(pacman -Q | wc -l) pacman"
-  color = $text
+    
-  font_size = 120
+    shadow_passes       = 1
-  font_family = $font
+    shadow_boost        = 0.5
-  position = 0, 300
+    
-  halign = center
+    color               = $fg0
-  valign = center
+    font_size           = 11
+    font_family         = $font-text
+
+    position            = 170, -35
+    halign              = left
+    valign              = top
+}
+
+# WEATHERCAST & LOCATION
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$(bash $scrPath/weatherinfo.sh)"
+    
+    shadow_passes       = 1
+    shadow_boost        = 0.5
+    
+    color               = $fg0
+    font_size           = 11
+    font_family         = $font-text
+
+    position            = 0, -20
+    halign              = center
+    valign              = top
+}
+
+# INPUT FIELD
+input-field {
+    monitor     =
+    size        = 275, 55
+    rounding    = $rounding
+    
+    outline_thickness   = $weight
+    outer_color         = $border-color
+    dots_size           = 0.1 # Scale of input-field height, 0.2 - 0.8
+    dots_spacing        = 1 # Scale of dots' absolute size, 0.0 - 1.0
+    dots_center         = true
+    
+    inner_color         = $inner-color
+    font_color          = $fg0
+    fade_on_empty       = false
+    
+    font_family         = $font-text
+    placeholder_text    = <span foreground="##$textAlpha">󰢏 $USER</span>
+    hide_input          = false
+    check_color         = $mauve
+    fail_color          = $red
+    fail_text           = <i>$FAIL <b>($ATTEMPTS)</b></i>
+    capslock_color      = $yellow
+    
+    position            = 0, -240
+    halign              = center
+    valign              = center
+    zindex              = 10
+}
+
+# TIME HR
+label {
+    monitor     =
+    text        = cmd[update:1000] echo -e "$(date +"%H")" # 24-Hour Format
+   #text        = cmd[update:1000] echo -e "$(date +"%I")" # 12-Hour Format
+    color       = $clock-color
+    
+    shadow_pass         = $shadow-pass
+    shadow_size         = $shadow-size
+    shadow_color        = $shadow-color
+    shadow_boost        = $shadow-boost
+    
+    font_size           = 150
+    font_family         = $font-display 
+    
+    position            = 0, -155
+    halign              = center
+    valign              = top
+}
+
+# TIME MM
+label {
+    monitor     =
+    text        = cmd[update:1000] echo -e "$(date +"%M")"
+    color       = $clock-color
+    
+    shadow_pass         = $shadow-pass
+    shadow_size         = $shadow-size
+    shadow_color        = $shadow-color
+    shadow_boost        = $shadow-boost
+
+    font_size           = 150
+    font_family         = $font-display
+    
+    position            = 0, -325
+    halign              = center
+    valign              = top
+}
+
+# AM/PM for 12-Hour Format
+#label {
+    monitor     =
+    text = cmd[update:1000] echo -e "$(date +"%p")"
+    color       = $clock-color
+    
+    shadow_pass         = $shadow-pass
+    shadow_size         = $shadow-size
+    shadow_color        = $shadow-color
+    shadow_boost        = $shadow-boost
+
+    font_size           = 16
+    font_family         = $font-display
+    
+    position            = 0, 17
+    halign              = center
+    valign              = center
+    zindex		= 5
+}
+
+# AM/PM BG
+#shape {
+    monitor     =
+    size        = 70, 40
+    
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $shape-col2
+    rounding            = $rounding
+    border_size         = 
+    border_color        =
+
+    position            = 0, 20
+    halign              = center
+    valign              = center
+    zindex              = 1
+}
+
+# GREETING
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$(bash $scrPath/greeting.sh)"
+    
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+    
+    color               = $fg0
+    font_size           = 11
+    font_family         = $font-text
+
+    position            = 0, -55
+    halign              = center
+    valign              = center
+}
+
+# TODAY IS
+label {
+    monitor     =
+    text        = cmd[update:1000] bash -c 'day=$(date +%A); echo "Today is $day"'
+
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $fg0
+    font_size           = 11
+    font_family         = $font-text
+
+    position            = 0, -75
+    halign              = center
+    valign              = center
 }
 
 # DATE
 label {
-  monitor =
+    monitor     =
-  text = cmd[update:43200000] date +"%A, %d %B %Y"
+    text        = cmd[update:1000] bash -c 'day=$(date +%d); case "$day" in 1) suffix="st";; 2) suffix="nd";; 3) suffix="rd";; *) suffix="th";; esac; echo -e "$(date +"%B %e")'$day'$suffix, $(date +%Y)"'
-  color = $text
+
-  font_size = 30
+    shadow_passes       = $text-shadow-pass
-  font_family = $font
+    shadow_boost        = $text-shadow-boost
-  position = 0, 200
+
-  halign = center
+    color               = $fg0
-  valign = center
+    font_size           = 14
+    font_family         = $font-text
+
+    position            = 0, -115
+    halign              = center
+    valign              = center
 }
 
-# USER AVATAR (Center)
+# BATTERY
-image {
-  monitor =
-  path = $HOME/.face
-  size = 120
-  border_color = rgba(255, 255, 255, 0.1)
-  position = 0, 50
-  halign = center
-  valign = center
-}
-
-# INPUT FIELD (Center)
-input-field {
-  monitor =
-  size = 300, 60
-  outline_thickness = 2
-  dots_size = 0.2
-  dots_spacing = 0.2
-  dots_center = true
-  outer_color = rgba(255, 255, 255, 0.1)
-  inner_color = rgba(0, 0, 0, 0.2)
-  font_color = $text
-  fade_on_empty = false
-  placeholder_text = <span foreground="##$textAlpha"><i>󰌾 Logged in as </i><span foreground="##$accentAlpha">$USER</span></span>
-  hide_input = false
-  check_color = $accent
-  fail_color = $red
-  fail_text = <i>$FAIL <b>($ATTEMPTS)</b></i>
-  capslock_color = $yellow
-  position = 0, -60
-  halign = center
-  valign = center
-}
-
-# --- MUSIC DASHBOARD (TOP RIGHT) ---
-
-# ALBUM ART (At the very top right, 80px high, adjusted -3px for perfect alignment)
-image {
-    monitor =
-    path = /tmp/hyprlock_art.png
-    size = 80
-    rounding = 15
-    border_color = rgba(255, 255, 255, 0.1)
-    reload_time = 2
-    reload_cmd = ~/.config/hypr/scripts/album_art.sh
-    position = -20, -17
-    halign = right
-    valign = top
-}
-
-# MUSIC TEXT BOX (To the left of the image, same height)
-shape {
-    monitor =
-    size = 300, 80
-    color = rgba(0, 0, 0, 0.3)
-    rounding = 15
-    border_size = 1
-    border_color = rgba(255, 255, 255, 0.1)
-    position = -110, -20
-    halign = right
-    valign = top
-}
-
-# MUSIC TEXT (Right aligned and vertically centered inside the 80px box)
 label {
-    monitor =
+    monitor     =
-    text = cmd[update:1000] ~/.config/hypr/scripts/songdetail.sh
+    text        = cmd[update:1000] echo -e "$($scrPath/battery.sh)"
-    color = $text
+    
-    font_size = 14
+    color               = $fg1
-    font_family = $font
+    font_size           = 12
-    position = -125, -37
+    font_family         = $font-text
-    halign = right
+    
-    valign = top
+    position            = -37, 29
-    text_align = right
+    halign              = right
+    valign              = bottom
+    zindex              = 5
 }
 
-# --- STATUS DASHBOARD (BOTTOM RIGHT) ---
+# NETWORK
-
-# SYSTEM INFO BOX (Vertical stack container)
-shape {
-    monitor =
-    size = 300, 100
-    color = rgba(0, 0, 0, 0.3)
-    rounding = 15
-    border_size = 1
-    border_color = rgba(255, 255, 255, 0.1)
-    position = -20, 20
-    halign = right
-    valign = bottom
-}
-
-# SYSTEM INFO TEXT (3 lines, top of each other, right aligned)
 label {
-    monitor =
+    monitor     =
-    text = cmd[update:5000] ~/.config/hypr/scripts/status_info.sh
+    text        = cmd[update:1000] echo -e "$($scrPath/network.sh)"
-    color = $text
+    
-    font_size = 14
+    color               = $fg1
-    font_family = $font
+    font_size           = 12
-    position = -35, 35
+    font_family         = $font-text
-    halign = right
+    
-    valign = bottom
+    position            = 37, 29
-    text_align = right
+    halign              = left
+    valign              = bottom
+    zindex              = 5
 }
+
+# BLUETOOTH
+label {
+    monitor     = 
+    text        = cmd[update:1000] echo -e "$(~/.config/hypr/hyprlock/bluetooth.sh)"
+    
+    color               = $fg1
+    font_size           = 12
+    font_family         = $font-text
+    
+    position            = 37, 85
+    halign 		= left
+    valign 		= bottom
+    zindex 		= 5
+}
+
+# BATTERY BG
+shape {
+    monitor     =
+    size        = 90, 40
+    
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $shape-col0
+    rounding            = $shape-rd
+    border_size         = 
+    border_color        =
+
+    position            = -20, 20
+    halign              = right
+    valign              = bottom
+    zindex              = 1
+}
+
+# NETWORK BG
+shape {
+    monitor     =
+    size        = 150, 40
+
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $shape-col0
+    rounding            = $shape-rd
+    border_size         = 
+    border_color        =
+
+    position            = 20, 20
+    halign              = left
+    valign              = bottom
+    zindex              = 1
+}
+
+# BLUETOOTH BG
+shape {
+    monitor     =
+    size        = 150, 40
+
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $shape-col0
+    rounding            = $shape-rd
+    border_size         = 
+    border_color        =
+
+    position            = 20, 75
+    halign              = left
+    valign              = bottom
+    zindex              = 1
+}
+
+# MEDIA BG
+image {
+    monitor     =
+    path        = $imgPath/media-bg-dark-25.png
+    size        = 8% 
+    opacity     = 0.25
+
+    rounding            = 5
+    border_size         = 0
+    rotate              = 0
+
+    position            = 0, -10% 
+    halign              = center
+    valign              = center
+    zindex              = 1
+}
+
+shape {
+    monitor     =
+    size        = 35%, 8% 
+
+    shadow_passes       = $text-shadow-pass
+    shadow_boost        = $text-shadow-boost
+
+    color               = $shape-col1
+    rounding            = $rounding
+    border_size         =
+    border_color        =
+
+    position            = 0, 5%
+    halign              = center
+    valign              = bottom
+    zindex              = 1
+}
+
+# PLAYER TITLE
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --title)"
+
+    color               = $fg0
+    font_size           = 14
+    font_family         = $font-text
+
+    position            = 0, -40%
+    halign              = center
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER ARTIST
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --artist)"
+
+    color               = $fg0
+    font_size           = 11
+    font_family         = $font-text
+
+    position            = 0, -42%
+    halign              = center
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER ALBUM
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --album)"
+
+    color               = $fg0
+    font_size           = 11
+    font_family         = $font-text0
+
+    position            = 0, -44%
+    halign              = center
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER STATUS SYMBOL
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --status-symbol)"
+
+    color               = $fg0
+    font_size           = 16
+    font_family         = $font-symbol
+
+    position            = 33.5%, -38%
+    halign              = left
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER STATUS
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --status)"
+
+    color               = $fg0
+    font_size           = 10
+    font_family         = $font-text
+
+    position            = 35%, -38%
+    halign              = left
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER SOURCE SYMBOL
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --source-symbol)"
+
+    color               = rgba($subtext0Alpha99)
+    font_size           = 16
+    font_family         = $font-symbol
+
+    position            = -33.5%, -38%
+    halign              = right
+    valign              = center
+    zindex              = 5
+}
+
+# PLAYER SOURCE
+label {
+    monitor     =
+    text        = cmd[update:1000] echo "$($scrPath/playerctl.sh --source)"
+
+    color               = rgba($subtext0Alpha99)
+    font_size           = 10
+    font_family         = $font-text
+
+    position            = -35%, -38%
+    halign              = right
+    valign              = center
+    zindex              = 5
+}
+
+label {
+    monitor     =
+    text        =
+
+    color               = $fg0
+    font_size           = 24
+    font_family         = $font-symbol
+
+    position            = 0, 1%
+    halign              = center
+    valign              = bottom
+}
+
+

hypr/hyprlock.conf.bak

@@ -0,0 +1,155 @@
+source = $HOME/.config/hypr/catppuccin-hyprland/themes/mocha.conf
+
+$accent = $mauve
+$accentAlpha = $mauveAlpha
+$font = JetBrainsMono Nerd Font
+
+# GENERAL
+general {
+  hide_cursor = true
+  no_fade_in = false
+  grace = 0
+  disable_loading_bar = true
+}
+
+# BACKGROUND
+background {
+  monitor =
+  path = $HOME/Pictures/reze/reze.png
+  blur_passes = 3
+  blur_size = 7
+  noise = 0.0117
+  contrast = 0.8916
+  brightness = 0.8172
+  vibrancy = 0.1696
+  vibrancy_darkness = 0.0
+  color = $base
+}
+
+# TIME
+label {
+  monitor =
+  text = $TIME
+  color = $text
+  font_size = 120
+  font_family = $font
+  position = 0, 300
+  halign = center
+  valign = center
+}
+
+# DATE
+label {
+  monitor =
+  text = cmd[update:43200000] date +"%A, %d %B %Y"
+  color = $text
+  font_size = 30
+  font_family = $font
+  position = 0, 200
+  halign = center
+  valign = center
+}
+
+# USER AVATAR (Center)
+image {
+  monitor =
+  path = $HOME/.face
+  size = 120
+  border_color = rgba(255, 255, 255, 0.1)
+  position = 0, 50
+  halign = center
+  valign = center
+}
+
+# INPUT FIELD (Center)
+input-field {
+  monitor =
+  size = 300, 60
+  outline_thickness = 2
+  dots_size = 0.2
+  dots_spacing = 0.2
+  dots_center = true
+  outer_color = rgba(255, 255, 255, 0.1)
+  inner_color = rgba(0, 0, 0, 0.2)
+  font_color = $text
+  fade_on_empty = false
+  placeholder_text = <span foreground="##$textAlpha"><i>󰌾 Logged in as </i><span foreground="##$accentAlpha">$USER</span></span>
+  hide_input = false
+  check_color = $accent
+  fail_color = $red
+  fail_text = <i>$FAIL <b>($ATTEMPTS)</b></i>
+  capslock_color = $yellow
+  position = 0, -60
+  halign = center
+  valign = center
+}
+
+# --- MUSIC DASHBOARD (TOP RIGHT) ---
+
+# ALBUM ART (At the very top right, 80px high, adjusted -3px for perfect alignment)
+image {
+    monitor =
+    path = /tmp/hyprlock_art.png
+    size = 80
+    rounding = 15
+    border_color = rgba(255, 255, 255, 0.1)
+    reload_time = 2
+    reload_cmd = ~/.config/hypr/scripts/album_art.sh
+    position = -20, -17
+    halign = right
+    valign = top
+}
+
+# MUSIC TEXT BOX (To the left of the image, same height)
+shape {
+    monitor =
+    size = 300, 80
+    color = rgba(0, 0, 0, 0.3)
+    rounding = 15
+    border_size = 1
+    border_color = rgba(255, 255, 255, 0.1)
+    position = -110, -20
+    halign = right
+    valign = top
+}
+
+# MUSIC TEXT (Right aligned and vertically centered inside the 80px box)
+label {
+    monitor =
+    text = cmd[update:1000] ~/.config/hypr/scripts/songdetail.sh
+    color = $text
+    font_size = 14
+    font_family = $font
+    position = -125, -37
+    halign = right
+    valign = top
+    text_align = right
+}
+
+# --- STATUS DASHBOARD (BOTTOM RIGHT) ---
+
+# SYSTEM INFO BOX (Vertical stack container)
+shape {
+    monitor =
+    size = 300, 100
+    color = rgba(0, 0, 0, 0.3)
+    rounding = 15
+    border_size = 1
+    border_color = rgba(255, 255, 255, 0.1)
+    position = -20, 20
+    halign = right
+    valign = bottom
+}
+
+# SYSTEM INFO TEXT (3 lines, top of each other, right aligned)
+label {
+    monitor =
+    text = cmd[update:5000] ~/.config/hypr/scripts/status_info.sh
+    color = $text
+    font_size = 14
+    font_family = $font
+    position = -35, 35
+    halign = right
+    valign = bottom
+    text_align = right
+}

hypr/hyprlock/battery.sh

@@ -0,0 +1,33 @@
+#!/bin/bash
+
+# Get the current battery percentage
+battery_percentage=$(cat /sys/class/power_supply/BAT0/capacity)
+
+# Get the battery status (Charging or Discharging)
+battery_status=$(cat /sys/class/power_supply/BAT0/status)
+
+# Define the battery icons for each 10% segment
+battery_icons=("󰂃" "󰁺" "󰁻" "󰁼" "󰁽" "󰁾" "󰁿" "󰂀" "󰂁" "󰁹")
+
+# Define the charging icon
+charging_icon="󰂄"
+
+# Calculate the index for the icon array
+# Ensure the index is within bounds (0 to 9) for battery percentages 0 to 100
+icon_index=$((battery_percentage / 10))
+
+# If the battery is 100%, use the last icon (index 9)
+if [ "$battery_percentage" -eq 100 ]; then
+    icon_index=9
+fi
+
+# Get the corresponding icon
+battery_icon=${battery_icons[$icon_index]}
+
+# Check if the battery is charging
+if [ "$battery_status" = "Charging" ]; then
+    battery_icon="$charging_icon"
+fi
+
+# Output the battery percentage and icon
+echo "$battery_percentage% $battery_icon"

hypr/hyprlock/bluetooth.sh

@@ -0,0 +1,47 @@
+#!/bin/bash
+
+# Path to the Hyprland configuration file
+config_file="$HOME/.config/hypr/hyprlock.conf"
+
+# Read the bt-mode value from the configuration file
+bt_mode=$(grep -oP '^\$bt-mode\s*=\s*\K\S+' ~/.config/hypr/hyprlock.conf)
+
+# Get Bluetooth power status
+bluetooth_status=$(bluetoothctl show | grep "Powered:" | awk '{print $2}')
+
+# Check if Bluetooth is powered on
+if [ "$bluetooth_status" != "yes" ]; then
+    echo "󰂯 Bluetooth Off"
+    exit 0
+fi
+
+# Initialize connected devices
+connected_devices=$(echo "$connected_devices" | sed 's/[[:space:]]*$//')
+
+# Process Bluetooth devices
+while read -r line; do
+    echo "Processing line: $line" >&2
+    device_mac=$(echo "$line" | awk '{print $2}')
+    device_name=$(echo "$line" | cut -d' ' -f3-)
+    echo "Device MAC: $device_mac" >&2
+    echo "Device Name: $device_name" >&2
+    if bluetoothctl info "$device_mac" | grep -q "Connected: yes"; then
+        connected_devices+="$device_name "
+    fi
+    echo "Finished processing $device_mac" >&2
+    echo "---" >&2
+done < <(bluetoothctl devices)
+
+# If no connected devices, show "No Devices"
+if [ -z "$connected_devices" ]; then
+    echo "󰂲 No Devices"
+    exit 0
+fi
+
+# Display output based on bt-mode
+if [ "$bt_mode" = "true" ]; then
+    echo "󰂯 $connected_devices"
+else
+    echo "󰂯 Connected"
+fi
+

hypr/hyprlock/change_wallpaper.sh

@@ -0,0 +1,22 @@
+#!/bin/bash
+
+# Only works if you use SWWW for your wallpapers
+
+SWWW_DIR="$HOME/.cache/swww/"
+HYPRLOCK="$HOME/.config/hypr/hyprlock.conf"
+
+# Get a Monitor Cache File
+FIRST_FILE=$(find "$SWWW_DIR" -type f | head -n 1)
+
+# Check if SWWW file exists
+if [ -n "$FIRST_FILE" ] && [ -f "$FIRST_FILE" ]; then
+    WALLPAPER=$(sed -n '2p' "$FIRST_FILE")
+
+    sed -i "s|^\(\$wallpaper[[:space:]]*=[[:space:]]*\).*|\1$WALLPAPER # (screenshot or /path/to/your/wallpaper.jpg)|" "$HYPRLOCK"
+    echo "Wallpaper path updated to $WALLPAPER"
+    exit 0
+fi
+
+# Error
+echo "Fehler: kein Wallpaper gefunden."
+exit 1

hypr/hyprlock/greeting.sh

@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# Set your Username
+# username="TamarindX"
+
+# Read the username alias from hyprlock.conf
+username=$(grep -oP '^\$USER\s*=\s*\K\S+' ~/.config/hypr/hyprlock.conf)
+
+# Check if the username was successfully extracted
+if [ -z "$username" ]; then
+  echo "Username not found in hyprlock.conf."
+  exit 1
+fi
+
+# Get the current hour
+hour=$(date +%H)
+
+# Determine the greeting based on the time
+if   [ "$hour" -ge 5  ] && [ "$hour" -lt 12 ]; then
+    greeting="Good Morning"
+elif [ "$hour" -ge 12 ] && [ "$hour" -lt 17 ]; then
+    greeting="Good Afternoon"
+elif [ "$hour" -ge 17 ] && [ "$hour" -lt 21 ]; then
+    greeting="Good Evening"
+elif [ "$hour" -ge 21 ] && [ "$hour" -lt 24 ]; then
+    greeting="Good Night"
+else
+    greeting="GO TO SLEEP!"
+fi
+
+# Output the combined text
+echo -e "Hello, $username! $greeting"

hypr/hyprlock/network.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+
+# Set this variable to control the output
+# Set to "true" to show SSID, "false" to show "Connected"
+# show_ssid=false
+
+# Read the wifi-mode alias from hyprlock.conf
+show_ssid=$(grep -oP '^\$wifi-mode\s*=\s*\K\S+' ~/.config/hypr/hyprlock.conf)
+
+# Check if the SSID was successfully extracted else fallback?!
+if [ -z "$show_ssid" ]; then
+  show_ssid=false
+fi
+
+# Check if any Ethernet connection is active
+ethernet_connected=$(nmcli -t -f DEVICE,TYPE,STATE dev | grep -E 'ethernet:connected')
+
+# If Ethernet
+if [ -n "$ethernet_connected" ]; then
+    echo "󰈀  Ethernet"
+    exit 0
+fi
+
+# Get Wi-Fi connection status
+wifi_status=$(nmcli -t -f WIFI g)
+
+# Check if Wi-Fi is enabled
+if [ "$wifi_status" != "enabled" ]; then
+    echo "󰤮  Wi-Fi Off"
+    exit 0
+fi
+
+# Get active Wi-Fi connection details
+wifi_info=$(nmcli -t -f ACTIVE,SSID,SIGNAL dev wifi | grep '^yes')
+
+# If no active connection, show "Disconnected"
+if [ -z "$wifi_info" ]; then
+    echo "󰤮  No Wi-Fi"
+    exit 0
+fi
+
+# Extract SSID
+ssid=$(echo "$wifi_info" | cut -d':' -f2)
+
+# Extract signal strength
+signal_strength=$(echo "$wifi_info" | cut -d':' -f3)
+
+# Define Wi-Fi icons based on signal strength
+wifi_icons=("󰤯" "󰤟" "󰤢" "󰤥" "󰤨") # From low to high signal
+
+# Clamp signal strength between 0 and 100
+signal_strength=$((signal_strength < 0 ? 0 : (signal_strength > 100 ? 100 : signal_strength)))
+
+# Calculate the icon index based on signal strength
+icon_index=$((signal_strength / 25))
+
+# Get the corresponding icon
+wifi_icon=${wifi_icons[$icon_index]}
+
+# Output based on show_ssid variable
+if [ "$show_ssid" = true ]; then
+    echo "$wifi_icon  $ssid"
+else
+    echo "$wifi_icon  Connected"
+fi

hypr/hyprlock/playerctl.sh

@@ -0,0 +1,116 @@
+#!/bin/bash
+
+if [ $# -eq 0 ]; then
+	echo "Usage: $0 --title | --artist | --album | --source | --source-symbol"
+	exit 1
+fi
+
+# Function to get metadata using playerctl
+get_metadata() {
+	key=$1
+	playerctl metadata --player=%any,chromium,firefox --format "{{ $key }}" 2>/dev/null
+}
+
+# Check for arguments
+
+# Function to determine the source and return an icon and text
+get_source_info_symbol() {
+	trackid=$(get_metadata "mpris:trackid")
+	if [[ "$trackid" == *"firefox"* ]]; then
+		echo -e "󰈹"
+	elif [[ "$trackid" == *"spotify"* ]]; then
+		echo -e ""
+	elif [[ "$trackid" == *"chromium"* ]]; then
+		echo -e ""
+	else
+		echo ""
+	fi
+}
+
+get_source_info() {
+	trackid=$(get_metadata "mpris:trackid")
+	if [[ "$trackid" == *"firefox"* ]]; then
+		echo -e "Firefox"
+	elif [[ "$trackid" == *"spotify"* ]]; then
+		echo -e "Spotify"
+	elif [[ "$trackid" == *"chromium"* ]]; then
+		echo -e "Chrome"
+	else
+		echo ""
+	fi
+}
+
+# Function to truncate text with ellipsis if necessary
+truncate_with_ellipsis() {
+	text=$1
+	max_length=$2
+	if [ ${#text} -gt $max_length ]; then
+		echo "${text:0:$((max_length - 3))}..."
+	else
+		echo "$text"
+	fi
+}
+
+# Parse the argument
+case "$1" in
+--title)
+	title=$(get_metadata "xesam:title")
+	if [ -z "$title" ]; then
+		echo ""
+	else
+		truncate_with_ellipsis "$title" 28 # Limit the output to 50 characters
+	fi
+	;;
+--artist)
+	artist=$(get_metadata "xesam:artist")
+	if [ -z "$artist" ]; then
+		echo ""
+	else
+		truncate_with_ellipsis "$artist" 28 # Limit the output to 50 characters
+	fi
+	;;
+--status-symbol)
+	status=$(playerctl status 2>/dev/null)
+	if [[ $status == "Playing" ]]; then
+		echo "󰎆"
+	elif [[ $status == "Paused" ]]; then
+		echo "󰏥"
+	else
+		echo ""
+	fi
+	;;
+--status)
+	status=$(playerctl status 2>/dev/null)
+	if [[ $status == "Playing" ]]; then
+		echo "Playing Now"
+	elif [[ $status == "Paused" ]]; then
+		echo "Paused"
+	else
+		echo ""
+	fi
+	;;
+--album)
+	album=$(playerctl metadata --player=%any,chromium,firefox --format "{{ xesam:album }}" 2>/dev/null)
+	if [[ -n $album ]]; then
+		echo "$album"
+	else
+		status=$(playerctl status 2>/dev/null)
+		if [[ -n $status ]]; then
+			echo "Not album"
+		else
+			truncate_with_ellipsis "$album" 28 # Limit the output to 50 characters
+		fi
+	fi
+	;;
+--source-symbol)
+	get_source_info_symbol
+	;;
+--source)
+	get_source_info
+	;;
+*)
+	echo "Invalid option: $1"
+	echo "Usage: $0 --title | --artist | --album | --source | --source-symbol"
+	exit 1
+	;;
+esac

hypr/hyprlock/weatherinfo.sh

@@ -0,0 +1,39 @@
+#!/bin/bash
+
+# Get location data using IP Geolocation
+
+# Recommended with API, but you can try w/o API [IPINFO.IO]
+# API_TOKEN="YOUR_API_TOKEN"
+# location_data=$(curl -s "https://ipinfo.io?token=$API_TOKEN" 2>/dev/null)
+# location_data=$(curl -s https://ipinfo.io 2>/dev/null) #[Limited requests. Require API to send 50k request/month]
+
+# Extract city and country code (ISO 3166-1 alpha-2 code)
+# CITY=$(echo "$location_data" | jq -r '.city // empty')
+# COUNTRY=$(echo "$location_data" | jq -r '.country // empty')
+
+# IPINFO Alternative [IP-API.COM]
+location_data=$(curl -s "http://ip-api.com/json/" 2>/dev/null)
+
+# Extract city and country code
+CITY=$(echo "$location_data" | jq -r '.city // empty')
+COUNTRY=$(echo "$location_data" | jq -r '.countryCode // empty')
+# Visit http://ip-api.com/json/ to find other variables
+
+# HARDCODE Location
+# CITY=$(grep -oP '^\$CITY\s*=\s*\K.+' ~/.config/hypr/hyprlock.conf)
+# COUNTRY=$(grep -oP '^\$COUNTRY\s*=\s*\K.+' ~/.config/hypr/hyprlock.conf)
+
+# Check if CITY and COUNTRY are valid
+if [[ -n "$CITY" && -n "$COUNTRY" ]]; then
+    # Fetch weather info for the detected city from wttr.in
+    weather_info=$(curl -s "wttr.in/$CITY?format=%c+%C+%t" 2>/dev/null)
+
+    # Check if the weather info is valid
+    if [[ -n "$weather_info" ]]; then
+        echo "$COUNTRY, $CITY: $weather_info"
+    else
+        echo "Weather info unavailable for $COUNTRY, $CITY"
+    fi
+else
+    echo "Unable to determine your location"
+fi

hypr/install.sh

@@ -0,0 +1,97 @@
+#!/bin/bash
+
+# Set paths
+CONFIG_DIR="$HOME/.config/hypr"
+BACKUP_DIR="$CONFIG_DIR/hyprlock-backup-$(date +%Y%m%d%H%M%S)"
+REPO_URL="https://github.com/Tamarindtype/googlish-hyprlock-theme.git"
+TEMP_DIR="$(mktemp -d)"
+
+read -p "Do you want to see every command executed? [y/N]: " choice
+choice=${choice,,}
+
+if [[ "$choice" == "y" ]]; then
+    SHOW_COMMANDS=true
+else
+    SHOW_COMMANDS=false
+fi
+
+run_cmd() {
+    local desc="$1"
+    local cmd="$2"
+
+    if [[ "$SHOW_COMMANDS" == true ]]; then 
+        echo -e "\n$desc"
+        echo "-> $cmd"
+        read -p "Run command? [Y/n]: " confirm
+        confirm=${confirm,,} 
+
+        if [[ "$confirm" == "n" ]]; then
+            echo "⏭ Skipped."
+        else
+            eval "$cmd"
+        fi
+    else
+        eval "$cmd"
+    fi
+}
+
+# Backup existing config
+if [ -d "$CONFIG_DIR/hyprlock" ] || [ -f "$CONFIG_DIR/hyprlock.conf" ]; then
+    read -p "Do you want to create a backup of your config? [Y/n]: " choice
+    choice=${choice,,}
+
+    if [[ "$choice" != "n" ]]; then
+        run_cmd "Creating backup folder" "mkdir -p \"$BACKUP_DIR\""
+        
+        if [ -d "$CONFIG_DIR/hyprlock" ]; then
+            run_cmd "Backing up folder" "mv \"$CONFIG_DIR/hyprlock\" \"$BACKUP_DIR/\""
+        fi
+
+        if [ -f "$CONFIG_DIR/hyprlock.conf" ]; then
+            run_cmd "Backing up file" "mv \"$CONFIG_DIR/hyprlock.conf\" \"$BACKUP_DIR/\""
+        fi
+    fi
+else
+    echo "No existing hyprlock config found. Skipping backup."
+fi
+
+# Clone the repo
+run_cmd "Cloning repository..." "git clone \"$REPO_URL\" \"$TEMP_DIR\""
+
+# Move files
+run_cmd "Creating config directory" "mkdir -p \"$CONFIG_DIR\""
+
+if [ -d "$TEMP_DIR/hyprlock" ]; then
+    run_cmd "Moving hyprlock folder" "mv \"$TEMP_DIR/hyprlock\" \"$CONFIG_DIR/\""
+fi
+
+if [ -f "$TEMP_DIR/hyprlock.conf" ]; then
+    run_cmd "Moving hyprlock.conf" "mv \"$TEMP_DIR/hyprlock.conf\" \"$CONFIG_DIR/\""
+fi
+
+# Make scripts executable
+if [ -d "$CONFIG_DIR/hyprlock" ]; then
+    run_cmd "Making scripts executable..." "chmod +x \"$CONFIG_DIR/hyprlock\"/*.sh"
+fi
+
+# Optional: Run hyprlock
+run_cmd "Running Hyprlock" "hyprlock"
+
+read -p "Do you want to install the 'hyprlock-change-wallpaper' command? [Y/n]: " choice
+choice=${choice,,}
+
+if [[ "$choice" != "n" ]]; then
+    run_cmd "Installing hyprlock-change-wallpaper shortcut" "sudo ln -sf $CONFIG_DIR/hyprlock/change_wallpaper.sh /usr/local/bin/hyprlock-change-wallpaper"
+    run_cmd "Make command runable" "chmod +x $CONFIG_DIR/hyprlock/change_wallpaper.sh"
+
+    if command -v hyprlock-change-wallpaper &>/dev/null; then
+        echo "hyprlock-change-wallpaper was succesfully installed"
+    else
+        echo "Error while installing hyprlock-change-wallpaper."
+    fi
+else
+    echo "⏭ installation of hyprlock-change-wallpaper skipped"
+fi
+
+# Cleanup
+run_cmd "Cleaning up temp files..." "rm -rf \"$TEMP_DIR\""

hypr/lid_state.conf

@@ -1 +1 @@
-
+monitor=eDP-1, disable

hypr/modules/autostart.conf

@@ -14,4 +14,3 @@ exec-once = uwsm app -- hyprpaper
 # exec-once = uwsm app -- /usr/lib/xdg-desktop-portal-hyprland
 exec-once = wl-paste --type text --watch cliphist store # Stores only text data
 exec-once = wl-paste --type image --watch cliphist store # Stores only image data
-exec-once = uwsm app -- ~/.cargo/bin/fluxo-rs daemon

hypr/modules/env.conf

@@ -10,8 +10,8 @@ env = XCURSOR_THEME,Bibata-Modern-Classic
 env = XDG_CURRENT_DESKTOP,Hyprland
 # env = debug:full_cm_proto,true
 env = QT_QPA_PLATFORMTHEME,qt6ct
-# env = LIBVA_DRIVER_NAME,radeonsi
+env = LIBVA_DRIVER_NAME,radeonsi
-# env = VDPAU_DRIVER,radeonsi
+env = VDPAU_DRIVER,radeonsi
 env = MOZ_ENABLE_WAYLAND,1
 env = ELECTRON_OZONE_PLATFORM_HINT,wayland
 env = EDITOR,nvim

hypr/modules/keybinds.conf

@@ -6,11 +6,13 @@ bindl=,switch:off:Lid Switch,exec,~/.config/hypr/scripts/lid_handler.sh open
 
 bindr = ALT, m, exec, cliphist list | fuzzel --dmenu | cliphist decode | wl-copy
 bind = , PRINT, exec, grim -g "$(slurp)" - | wl-copy
+bind = SHIFT, PRINT, exec, grim -g "$(slurp)" ~/Pictures/Screenshots/$(date +'%Y-%m-%d_%H-%M-%S').png
 bindr = ALT SHIFT, z, exec, ~/.config/hypr/scripts/replay-ctrl.sh save
 bindr = ALT, z, exec, ~/.config/hypr/scripts/replay-ctrl.sh toggle
 bindr = ALT SHIFT, c, exec, ~/.config/hypr/scripts/droidcam-ctrl.sh toggle
 
 # general binds
+bind = $mainMod, B, exec, fluxo bt menu
 bind = $mainMod, RETURN, exec, $terminal
 bind = $mainMod SHIFT, Q, killactive,
 bind = $mainMod CTRL, L, exec, hyprlock
@@ -77,12 +79,12 @@ bindm = $mainMod, mouse:272, movewindow
 bindm = $mainMod, mouse:273, resizewindow
 
 # Laptop multimedia keys for volume and LCD brightness
-bindel = ,XF86AudioRaiseVolume, exec, fluxo-rs vol up 5
+bindel = ,XF86AudioRaiseVolume, exec, fluxo vol up 5
-bindel = ,XF86AudioLowerVolume, exec, fluxo-rs vol down 5
+bindel = ,XF86AudioLowerVolume, exec, fluxo vol down 5
-bindel = ,XF86AudioMute, exec, fluxo-rs vol mute
+bindel = ,XF86AudioMute, exec, fluxo vol mute
-bindel = ,XF86AudioMicMute, exec, fluxo-rs mic mute
+bindel = ,XF86AudioMicMute, exec, fluxo mic mute
-bindel = ,XF86MonBrightnessUp, exec, brightnessctl set 5%+
+bindel = ,XF86MonBrightnessUp, exec, brightnessctl s +10%
-bindel = ,XF86MonBrightnessDown, exec, brightnessctl set 5%-
+bindel = ,XF86MonBrightnessDown, exec, brightnessctl s 10%-
 
 # Requires playerctl
 bindl = , XF86AudioNext, exec, playerctl next

hypr/modules/monitors.conf

@@ -3,6 +3,8 @@
 monitor = eDP-1, 1920x1080@60, 0x0, 1
 # samsung home monitor
 monitor = desc:Samsung Electric Company LC27G7xT H4ZRA00734, 2560x1440@144, 0x-1440, 1
+# monitor = desc:Samsung Electric Company LC27G7xT H4ZRA00734, 1920x1080@144, 0x-1080, 1
+# monitor = desc:Samsung Electric Company LC27G7xT H4ZRA00734, 2560x1440@60, 0x-1440, 1
 
 
 # lid_state fallback

hypr/modules/window_rules.conf

@@ -5,7 +5,7 @@
 # VARIABLES
 # ==========================================
 # Dialogs and utility apps that should float in the center
-$dialog_titles = ^(Open Form|Open File|Select a File|Choose a file|Open Workspace|Choose Directory|Save As|Save File|branchdialog|pinentry-gtk-2|Confirm to replace files|File Operation Progress|Open Files|Anmelden – Google Konten — Zen Browser)$
+$dialog_titles = ^(Open Form|Open File|Select a File|Choose a file|Open Workspace|Choose Directory.*|Save As.*|Save File.*|branchdialog|pinentry-gtk-2|Confirm to replace files|File Operation Progress|Open Files.*|Anmelden.*|File Upload.*|TRuDI-Export laden)$
 $dialog_classes = ^(pavucontrol|blueman-manager|nm-connection-editor|org.pulseaudio.pavucontrol)$
 
 # App classes

mimeapps.list

@@ -18,6 +18,7 @@ application/vnd.openxmlformats-officedocument.wordprocessingml.document=libreoff
 x-scheme-handler/ror2mm=r2modman.desktop
 image/webp=feh.desktop
 x-scheme-handler/claude-cli=claude-code-url-handler.desktop
+x-scheme-handler/msteams=teams-for-linux.desktop
 
 [Added Associations]
 application/pdf=org.pwmt.zathura-pdf-poppler.desktop;

systemd/user/fluxo.service

@@ -0,0 +1,17 @@
+[Unit]
+Description=Fluxo — high-performance Waybar module daemon
+Documentation=https://github.com/narl/fluxo-rs
+PartOf=graphical-session.target
+After=graphical-session.target
+
+[Service]
+Type=simple
+ExecStart=%h/.cargo/bin/fluxo daemon
+Restart=on-failure
+RestartSec=3
+
+# Ensure the daemon can reach the user's D-Bus session and Wayland/Hyprland sockets.
+Slice=app-graphical.slice
+
+[Install]
+WantedBy=graphical-session.target

systemd/user/graphical-session.target.wants/fluxo.service

@@ -0,0 +1 @@
+/home/narl/.config/systemd/user/fluxo.service

waybar/config.jsonc

@@ -11,16 +11,13 @@
         "margin-right": 10,
 
         "modules-left": [
-            "hyprland/workspaces",
+            "group/spaces"
-            "hyprland/window"
         ],
         "modules-center": [
             "group/center"
         ],
         "modules-right": [
-            "tray",
+            "group/powertray"
-            "custom/gamemode",
-            "custom/power_status"
         ],
 
         // --- Standard Modules ---
@@ -39,28 +36,49 @@
         "custom/mpris": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs mpris",
+            "exec": "fluxo mpris",
             "on-click": "playerctl play-pause",
-            "signal": 11,
+            "signal": 11
-            "interval": 0
         },
         "tray": {
             "icon-size": 18,
             "spacing": 10
         },
-
+        "custom/dnd": {
+            "format": "{}",
+            "return-type": "json",
+            "exec": "fluxo dnd",
+            "on-click": "dunstctl set-paused toggle",
+            "signal": 13,
+            "interval": 5
+        },
+        "group/spaces": {
+            "orientation": "horizontal",
+            "modules": [
+                "hyprland/workspaces",
+                "hyprland/window"
+            ]
+        },
+        "group/powertray": {
+            "orientation": "horizontal",
+            "modules": [
+                "custom/dnd",
+                "tray",
+                "custom/gamemode",
+                "custom/power_status"
+            ]
+        },
         "group/center": {
             "orientation": "horizontal",
             "modules": [
                 "custom/mpris",
                 "clock"
-                // "custom/dnd"
             ]
         },
         "custom/gamemode": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs game",
+            "exec": "fluxo game",
             "on-click": "~/.config/hypr/scripts/gamemode.sh",
             "signal": 7,
             "interval": 5
@@ -69,7 +87,7 @@
         "custom/power_status": {
             "format": "{} ",
             "return-type": "json",
-            "exec": "fluxo-rs power",
+            "exec": "fluxo power",
             "on-click": "~/.config/hypr/scripts/powermenu.sh & disown",
             "signal": 10,
             "interval": 5
@@ -95,7 +113,8 @@
                 "custom/cpu",
                 "custom/mem",
                 "custom/disk-root",
-                "custom/network"
+                "custom/network",
+                "custom/backlight"
             ]
         },
         "modules-center": [
@@ -106,94 +125,87 @@
             "custom/mic"
         ],
 
-        // --- Fluxo-rs System & Hardware ---
+        // --- fluxo System & Hardware ---
         "custom/sys": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs sys",
+            "exec": "fluxo sys",
             "signal": 5,
-            "interval": 1
+            "interval": 5
         },
         "custom/cpu": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs cpu",
+            "exec": "fluxo cpu",
             "on-click": "zenmonitor & disown",
-            "signal": 2,
+            "signal": 2
-            "interval": 1
         },
         "custom/mem": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs mem",
+            "exec": "fluxo mem",
-            "signal": 3,
+            "signal": 3
-            "interval": 1
         },
         "custom/gpu": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs gpu",
+            "exec": "fluxo gpu",
-            "signal": 4,
+            "signal": 4
-            "interval": 1
         },
         "custom/network": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs net",
+            "exec": "fluxo net",
-            "signal": 1,
+            "signal": 1
-            "interval": 1
         },
 
         "custom/disk-root": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs disk /",
+            "exec": "fluxo disk /",
-            "signal": 6,
+            "signal": 6
-            "interval": 1
         },
 
-        // --- Fluxo-rs Audio & BT ---
+        // --- fluxo Audio & BT ---
         "custom/volume": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs vol",
+            "exec": "fluxo vol",
-            "on-click": "fluxo-rs vol mute",
+            "on-click": "fluxo vol mute",
-            "on-scroll-up": "fluxo-rs vol up 5",
+            "on-scroll-up": "fluxo vol up 5",
-            "on-scroll-down": "fluxo-rs vol down 5",
+            "on-scroll-down": "fluxo vol down 5",
-            "on-click-right": "fluxo-rs vol cycle",
+            "on-click-right": "fluxo vol cycle",
             "on-click-middle": "pavucontrol",
-            "signal": 8,
+            "signal": 8
-            "interval": 1
         },
         "custom/mic": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs mic",
+            "exec": "fluxo mic",
-            "on-click": "fluxo-rs mic mute",
+            "on-click": "fluxo mic mute",
-            "on-scroll-up": "fluxo-rs mic up 5",
+            "on-scroll-up": "fluxo mic up 5",
-            "on-scroll-down": "fluxo-rs mic down 5",
+            "on-scroll-down": "fluxo mic down 5",
-            "on-click-right": "fluxo-rs mic cycle",
+            "on-click-right": "fluxo mic cycle",
             "on-click-middle": "pavucontrol",
-            "signal": 8,
+            "signal": 8
-            "interval": 1
         },
         "custom/bluetooth-audio": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs bt",
+            "exec": "fluxo bt",
-            "on-click": "fluxo-rs bt menu",
+            "on-click": "fluxo bt menu",
-            "on-click-right": "fluxo-rs bt cycle_mode",
+            "on-click-right": "fluxo bt cycle",
+            "on-click-middle": "fluxo bt cycle_mode",
             "signal": 9,
-            "interval": 1,
             "tooltip": true
         },
-        "custom/dnd": {
+        "custom/backlight": {
             "format": "{}",
             "return-type": "json",
-            "exec": "fluxo-rs dnd",
+            "exec": "fluxo backlight",
-            "on-click": "fluxo-rs dnd toggle",
+            "on-scroll-up": "brightnessctl s +10%",
-            "signal": 14,
+            "on-scroll-down": "brightnessctl s 10%-",
-            "interval": 0
+            "signal": 12
         }
     }
 ]

waybar/style.css

@@ -1,55 +1,107 @@
 /* ~/.config/waybar/style.css */
 @import "./catppuccin-waybar/themes/mocha.css";
 
-/* --- Global Reset --- */
+/* ==========================================================================
+   Global Reset & Bar
+   ========================================================================== */
 * {
   border: none;
   border-radius: 12px;
   min-height: 0;
-  font-family: JetBrainsMono Nerd Font, sans-serif;
+  font-family: "JetBrainsMono Nerd Font", sans-serif;
   font-size: 12px;
   transition: all 0.3s cubic-bezier(0.25, 0.8, 0.25, 1);
 }
 
-/* --- Bar Background (Floating Island Style) --- */
 window#waybar {
   background-color: transparent;
   color: @text;
 }
 
-/* --- Top Bar Special Handling --- */
+/* ==========================================================================
-window#waybar.top {
+   Base Islands (Containers)
-  margin-top: 6px;
+   ========================================================================== */
-}
+/* Groups and standalone modules receive the floating island styling */
-
+#spaces,
-/* --- Bottom Bar Special Handling --- */
+#powertray,
-window#waybar.bottom {
-  margin-bottom: 6px;
-}
-
-/* --- Shared Island Styling --- */
-#workspaces,
-#window,
-#tray,
 #hardware,
+#center,
 #custom-bluetooth-audio,
 #custom-volume,
 #custom-buds,
-#custom-mic,
+#custom-mic {
-#custom-dnd,
-#custom-gamemode,
-#custom-power_status {
   background-color: alpha(@surface0, 0.8);
   margin: 4px 6px;
   padding: 4px 16px;
   border: 1px solid alpha(@surface1, 0.5);
   box-shadow: 0px 2px 4px rgba(0, 0, 0, 0.15);
-  color: @text; /* Unifies all standard text to the soft Catppuccin white */
+  color: @text;
 }
 
+/* Group-specific sizing overrides */
+#hardware,
+#powertray,
+#spaces {
+  border-radius: 24px;
+  padding: 4px 10px;
+}
+
+/* Center Pill (Clock + MPRIS) Override */
+#center {
+  background: linear-gradient(45deg, @mauve, @lavender);
+  color: @surface0; 
+  font-weight: 900;
+  padding: 4px 20px;
+}
+
+/* ==========================================================================
+   Grouped Modules (Inner Items)
+   ========================================================================== */
+/* Strip backgrounds and borders from items that live inside groups */
+#workspaces,
+#window,
+#custom-cpu,
+#custom-mem,
+#custom-sys,
+#custom-gpu,
+#custom-disk-root,
+#custom-mpris,
+#custom-network,
+#custom-backlight,
+#clock, 
+#tray, 
+#custom-gamemode, 
+#custom-dnd, 
+#custom-power_status {
+  background-color: transparent;
+  border: none;
+  box-shadow: none;
+  margin: 0;
+  padding: 0 8px; 
+}
+
+/* Subtle vertical separator line between inner items */
+#custom-cpu, 
+#custom-mem,
+#custom-sys,
+#custom-gpu,
+#custom-disk-root,
+#custom-mpris,
+#custom-network,
+#tray, 
+#custom-gamemode, 
+#custom-dnd {
+  border-right: 1px solid alpha(@surface1, 0.5);
+  border-radius: 0;
+}
+
+/* ==========================================================================
+   Specific Module Overrides & Alerts
+   ========================================================================== */
+
 /* --- Workspaces --- */
 #workspaces {
-  padding: 2px 8px;
+  padding: 0px 8px; /* Override the inner item padding */
 }
 
 #workspaces button {
@@ -57,19 +109,17 @@ window#waybar.bottom {
   margin: 4px;
   min-width: 12px;
   min-height: 12px;
-  background-color: @subtext0; /* Subtle dark gray for inactive */
+  background-color: @subtext0;
   color: transparent;
   border-radius: 12px;
-  transition: all 0.3s cubic-bezier(0.25, 0.8, 0.25, 1);
 }
 
-#workspaces button.active {
+#workspaces button.active,
+#workspaces button.active:hover {
   min-width: 30px;
-  background-color: @mauve; /* Signature Catppuccin accent */
+  background-color: @mauve;
 }
 
-#workspaces button.active:hover { min-width: 30px; background-color: @mauve; }
-
 #workspaces button:hover {
   background-color: @lavender;
   min-width: 20px;
@@ -79,139 +129,76 @@ window#waybar.bottom {
   background-color: @red;
 }
 
-/* --- Clock (Centered Pill) --- */
+/* --- Hardware Semantic Alerts --- */
-#center {
+.normal { color: @mauve; }
-  background: linear-gradient(45deg, @mauve, @lavender); /* Cohesive pastel gradient */
+.high   { color: @peach; }
-  color: @surface0; 
+.max    { color: @red; }
-  font-weight: 900;
+
-  margin: 4px 6px;
+#custom-network { color: @mauve; }
-  padding: 4px 20px;
+#custom-gamemode.active { color: @mauve; }
-  border-radius: 12px;
+
-  box-shadow: 0px 2px 4px rgba(0, 0, 0, 0.15);
+/* --- Media / Controls --- */
+#custom-volume.unmuted, 
+#custom-mic.unmuted {
+    color: @mauve;
+}
+#custom-volume.muted,
+#custom-mic.muted {
+  color: @overlay1;
+}
+
+/* --- Bluetooth Audio --- */
+#custom-bluetooth-audio.disabled,
+#custom-bluetooth-audio.disconnected {
+  color: @overlay1;
+}
+
+#custom-bluetooth-audio.connected {
+  color: @blue;
+}
+
+/* ANC States  */
+#custom-bluetooth-audio.anc-active,
+#custom-bluetooth-audio.connected.anc-active,
+#custom-bluetooth-audio.connected\ anc-active {
+  color: @mauve;
+}
+
+#custom-bluetooth-audio.anc-aware,
+#custom-bluetooth-audio.connected.anc-aware,
+#custom-bluetooth-audio.connected\ anc-aware {
+  color: @green;
+}
+
+#custom-bluetooth-audio.anc-off,
+#custom-bluetooth-audio.connected.anc-off,
+#custom-bluetooth-audio.connected\ anc-off {
+  color: @blue;
 }
 
 /* --- Power Status --- */
-#custom-power_status {
+#custom-power_status.charging { color: @green; }
-  font-weight: bold;
+#custom-power_status.warning  { color: @peach; }
-}
-#custom-power_status.charging {
-  color: @green;
-}
-#custom-power_status.warning {
-  color: @peach;
-}
 #custom-power_status.critical {
   color: @red;
   animation: blink 1s infinite alternate;
 }
 
-@keyframes blink {
-  to {
-    color: @base;
-    background-color: @red;
-  }
-}
 
-/* --- Hardware Group (Left Bottom) --- */
+/* Interactive Hover States for Standalone Modules */
-#hardware {
-  border-radius: 24px;
-  padding: 4px 10px;
-}
-
-/* Strip backgrounds and borders from the items inside the group */
-#custom-cpu,
-#custom-mem,
-#custom-network
-#custom-sys,
-#custom-gpu,
-#custom-disk-root,
-#custom-mpris,
-#clock, 
-#custom-dnd {
-  background-color: transparent;
-  border: none;
-  box-shadow: none;
-  margin: 0;
-  padding: 0 8px; 
-}
-
-/* Subtle vertical separator line between them */
-#custom-cpu, 
-#custom-mem,
-#custom-sys,
-#custom-gpu,
-#custom-disk-root,
-#custom-mpris
-/* #clock */ {
-  border-right: 1px solid alpha(@surface1, 0.5);
-  border-radius: 0;
-}
-
-#custom-network {
-    padding-left: 8px;
-    color: @mauve;
-}
-
-/* Hardware Semantic Alerts */
-.normal { color: @mauve; }
-.high { color: @peach; }
-.max  { color: @red; }
-
-/* Stale Data Warning (Module in backoff/failure state) */
-/* .warning { 
-  color: @peach; 
-  opacity: 0.6;
-} */
-
-/* --- Center Bottom Utilities --- */
-#custom-gamemode.active {
-  color: @mauve; /* Matches the workspace accent */
-  /* padding-left: 9px; */
-}
-
-/* --- Right Bottom Controls Semantic Alerts --- */
-#custom-volume.muted,
-#custom-mic.muted {
-  color: @overlay1; /* Dims when muted */
-}
-
-
-#custom-bluetooth-audio.disabled {
-    color: @overlay1; /* Green for active ANC */
-}
-
-#custom-bluetooth-audio.connected {
-    color: @blue; /* Green for active ANC */
-}
-
-#custom-bluetooth-audio.anc-off {
-    color: @blue; /* Green for active ANC */
-}
-
-#custom-bluetooth-audio.anc-active {
-    color: @blue; /* Green for active ANC */
-}
-
-#custom-bluetooth-audio.anc-aware {
-    color: @blue; /* Yellow for transparency mode */
-}
-
-#custom-bluetooth-audio.disconnected {
-    color: @text; /* Gray when off */
-}
-
-/* --- Hover States --- */
 #custom-volume:hover,
 #custom-buds:hover,
 #custom-mic:hover,
 #custom-bluetooth-audio:hover,
 #custom-power_status:hover {
   background-color: @surface1;
-  color: @mauve; /* Subtle accent color on hover instead of jarring borders */
+  color: @mauve;
 }
 
 
-/* --- Tooltip --- */
+/* ==========================================================================
+   Tooltips & Animations
+   ========================================================================== */
 tooltip {
   background-color: alpha(@base, 0.9);
   border: 1px solid @surface1;
@@ -223,3 +210,9 @@ tooltip label {
   padding: 8px;
 }
 
+@keyframes blink {
+  to {
+    color: @base;
+    background-color: @red;
+  }
+}